Volt LPL-PLKIT User manual

Installation Instructions

WARNING

LIT FIXTURE IS HOT!

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing this xture.

2. This xture is perfect for placing in water fountains, water falls, ponds, pools, etc.

3. This xture is intended to be used only with a power supply (transformer) rated

maximum of 300 watts (25 AMPS) at 12 volts ~ 22 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in order to

connect to the main low voltage cable.

5. Wiring connections must be made with UL listed wire connectors that is suitable for

outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2 cm) from a

building structure, a luminaire, or tting.

3W 7” China Hat with Finial, 12V Outdoor Brass Path Light, Includes

Stake & LED bulb

LPL-PLKIT

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

FIGURE A

FIGURE B

Ground Stake

Stem

GU4 Bulb

Socket

Hat

REFER TO FIGURE A WITH

INSTRUCTIONS 1-3:

STEP 1: Remove the nial, waterproof

washer, hat and shield from the stem.

STEP 2: Insert the GU4 Bulb into the

socket.

STEP 3: Install the shield, hat,

waterproof washer and nial back onto

the stem.

STEP 4: Make a wire connection with the

run line by splitting the two ends of each

wire. Then connect both left side ends

of each wire and both right side ends.

These do not have polarity, so just don’t

connect both ends of the same wire

together. See Figure B for details.

STEP 5: Turn on the transformer to

ensure xture is functioning properly.

STEP 6: Enjoy your new outdoor lighting.

Installation Instructions

Right Side Right Side

Left Side Left Side Run Wire

Fixture Wire

Wire Connector

Wire Connector

Waterproof

Washer

Finial

Shield

Table of contents

Other Volt Landscape Lighting manuals

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions