Contents
1About this document
1.1Function.................................. 4
1.2Target group .............................. 4
1.3Symbolism used............................ 4
2For your safety
2.1Authorised personnel ........................ 5
2.2Appropriate use ............................ 5
2.3Warning about misuse ....................... 5
2.4General safety instructions .................... 5
2.5Safety label on the instrument .................. 6
2.6CE conformity ............................. 6
2.7Fulfillment of NAMUR recommendations .......... 6
2.8Safety instructions for Ex areas ................. 6
3Product description
3.1Configuration .............................. 7
3.2Principle of operation ........................ 8
3.3Operation................................. 8
3.4Packaging,transport and storage ............... 8
4Mounting
4.1General instructions ......................... 10
4.2Mounting instructions ........................ 12
5Connect to power supply
5.1Prepare the connection....................... 18
5.2Connection procedure........................ 19
5.3Wiring plan,single chamber housing ............. 20
5.4Wiring plan,double chamber housing ............ 21
5.5Switch on phase............................ 22
6Set up with the indicating and adjustment module
6.1Short description ........................... 24
6.2Insert indicating and adjustment module........... 24
6.3Adjustment system .......................... 26
6.4Setup procedure............................ 27
6.5Menu plan ultrasonic sensor ................... 33
6.6Saving the parameter adjustment data ............ 35
7Maintenance and fault rectification
7.1Maintenance .............................. 36
7.2Remove interferences ........................ 36
7.3Exchanging the electronics module .............. 37
7.4Instrument repair ........................... 37
8Dismounting
8.1Dismounting steps .......................... 38
2OnC LevelSens 362 •4…20 mA/HARTtwo-wire
Contents
33920-EN-090514
