Vivo MOUNT-SONOS3T User manual

TV Mount Designed for Sonos Arc Soundbar

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

https://vivo-us.com/products/mount-sonos3t

SKU: MOUNT-SONOS3T

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

VESA mount type: Plate

Instruction Manual

PACKAGE CONTENTS

WARNING!

A (x2)

VESA Bracket

B(x2)

Mounting Bracket

C(x1)

Center Bracket

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

S-D (x2)

Large Spacer

S-A (x4)

M6x8 Screw

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

Phillips

Screwdriver

Drill Level Pencil

M-A (x4)

M5x16

M-B (x4)

M6x16

M-C (x4)

M5x25

M-D (x4)

M6x25

M-E (x4)

M6x40

M-F (x4)

M8x40

M-G (x4)

M8x60

M-H (x4)

D5 Washer

M-I (x8)

Small Spacer

M-J (x8)

Large Spacer

S-B (x2)

M6x20 Screw

S-F (x4)

M6x10 Screw

S-C (x2)

M6 Nut

S-E (x4)

5mm Spacer

S-G (x2)

Knob

T-B (x1)

Wrench

T-A (x1)

4mm Allen

Wrench

ASSEMBLY STEPS

STEP 1

Assemble Mounting Brackets (B) to Center Bracket (C) using M6x8 Screws (S-A), and tighten with 4mm

Allen Wrench (T-A). The open slots and square cutout must all be facing up.

STEP 2 (Option A)

S-B

S-C

T-B

T-A

Below TV Installation

Measure the horizontal mounting hole spacing on the back of the TV to determine correct spacing for

VESA Brackets (A). Install VESA Brackets (A) to the back of the assembled mount using M6x20 Screws

(S-B) and M6 Nuts (S-C), tightening with 4mm Allen Wrench (T-A) and Wrench (T-B).

NOTE: Make sure the arrow on the back of Center Bracket (C) is facing down.

T-A S-A

Below TV Installation

Determine the correct mounting height for the soundbar mount.

For below TV mounting, the open slots in the soundbar mount should be at least 2.5” below the bottom

edge of the TV.

STEP 3 (Option A)

STEP 2 (Option B)

Above TV Installation

Measure the horizontal mounting hole spacing on the back of the TV to determine correct spacing for

VESA Brackets (A). Install VESA Brackets (A) to the back of the assembled mount using M6x20 Screws

(S-B) and M6 Nuts (S-C), tightening with 4mm Allen Wrench (T-A) and Wrench (T-B).

NOTE: Make sure the arrow on the back of Center Bracket (C) is facing down.

T-B

T-A

S-C

S-B

>2.5

<2.5

2.5

STEP 3 (Option B)

Above TV Installation

For above TV mounting, measure the distance from the base of the soundbar to the center of the rear

mounting holes. The distance from the top edge of the TV to the open slots in the soundbar mount

should be equal to or greater than the measured distance.

STEP 4 (Option A)

Below TV Mounting

Install the assembled mount, Large Spacers (S-D) and VESA brackets from TV VESA mount to the back

of the TV using screws (M-A through M-G), washers (M-H) and spacers (M-I, M-J) as needed. The TV

VESA mount brackets should be placed behind the soundbar mount and Large Spacers (S-D).

S-D S-D S-D

S-D

M-A

M-H

S-D

M-B

S-D S-D

S-D

M-E

M-F M-G

M-I

M-J

M-I

M-J

M-A

M-H

M-B M-E

M-F M-G

M-I

M-J M-J

M-I

>2.5”

<2.5”

>2.5”

STEP 4 (Option B)

Above TV Mounting

Install the assembled mount on the back of the TV with VESA plate from the TV mount, and secure

using Screws (M-A through M-G) of the correct size for your TV. Use D5 Washers (M-H) and Spacers

(M-I, M-J) if needed.

NOTE: To ensure the mount is installed securely, top mounting requires the use of all four TV

mounting holes as shown below.

S-E S-E S-E

S-E

S-E S-E

S-ES-E

S-F

S-E S-E S-E

S-E

J-J

M-

M-I

M-

STEP 5

Screw Knobs (S-G) into the back of the Sonos Arc soundbar.

STEP 6

Hang the Sonos Arc soundbar over the top of the mount, making sure Knobs (S-G) are inserted

into the slots.

S-G

LAST UPDATED: 08/31/2021

REV1.2

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected] AVG. RESPONSE TIME (within oce hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oce hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oce hrs): 5M 4S

309-278-5303

Table of contents

Popular TV Mount manuals by other brands

Ergotron

Ergotron Neo Flex Cantilever UHD user guide

StarTech.com

StarTech.com FPCEILBTB user manual

VonHaus

VonHaus 05/038 instruction manual

Techlink

Techlink ECHO TV manual

Sandstrom

Sandstrom SSTVMC12X instruction manual

Sony

Sony SU-WL700 Additional information for Using

ICW

ICW SCACC18 installation instructions

LG WM-L640V owner's manual

Gembird

Gembird WM-65ST-01 user manual

ERARD

ERARD FiTUP XXL 035320 quick start guide

PEERLESS

PEERLESS PLCK-1 Installation and assembly

Kanto

Kanto RCF180 user manual

GEM

GEM GEM GP001 instructions

Gladiator Joe

Gladiator Joe GJ0A0053 quick start guide

Vivotek

Vivotek AM-105 installation guide

AmazonBasics

AmazonBasics B07QG3LMG4 manual

Secura

Secura QLF210 instruction manual

Marquant

Marquant 929-083 Operating instructions in original