Vivo STAND-V104A User manual

Quad Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v104a

SKU: STAND-V104A

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do

not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly

or inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

Phillips

Screwdriver Drill

22 lbs

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

S-C (x3)

M6x10mm

Screw

S-D (x2)

M10x15mm

Screw

K(x2)

Spare Cap

H(x1)

Support Plate

S-I (x1)

M10 Washer

S-H (x1)

Spring Washer

I(x1)

Foam Pad

C(x1)

Clamp Brace

PACKAGE CONTENTS

A (x1)

Pole

B(x1)

Clamp

D(x1)

Decorative

Cover

E(x1)

Center

Monitor Arm

G (x1)

Mount

J (x4)

Monitor Arm

Cover

L (x4)

Plastic Spacer

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

F(x2)

Monitor Arm

S-B (x1)

M10x100mm

Screw

S-E(x4)

M8x10mm

Screw

M-A (x16)

M4x12mm

Thumbscrew

S-A (x2)

M10x47mm

Screw

M-B (x16)

M4x30mm

Screw

M-C (x16)

M4 Spacer

T-A (x1)

3mm Allen

Wrench

T-B (x1)

5mm Allen

Wrench

T-C (x1)

6mm Allen

Wrench

T-D (x1)

Wrench

N (x2)

Side

VESA Plate

S-F (x2)

Nut

O(x2)

Center

VESA Plate

S-G (x2)

M4x6mm

Screw

M(x4)

Cable Clip

ASSEMBLY STEPS

STEP 1 - Clamp Installation

Install Pole (A) to Clamp Brace (C) using M6x10mm Screws (S-C) and a Phillips screwdriver.

Assemble Clamp (B) to Clamp Brace (C) using M10x15mm Screws (S-D) and 5mm Allen Wrench (T-B).

Secure the clamp assembly to the desktop be tightening to the hand bolts on Clamp Brace (C). Install

the Pole Cover (D) to Pole (A).

S-C

S-D

T-B

STEP 1 - Grommet Installation

Remove adhesive backing from Foam Pad Pad (I) and place on the bottom of Pole (A).

Install Pole (A) to existing grommet hole using Support Plate (H) with M10x100mm Screw (S-B),

M10 Washer (S-G) and Spring Washer (S-F). Tighten with Wrench (T-D). Install the Pole Cover (D)

to Pole (A).

S-G

S-F

T-D

S-B

If no grommet hole exists, drill a 3/8” (10mm) diameter hole through the mounting surface.

STEP 2

Align Monitor Arm and Center Monitor Arm (E,F) so that the holes for the cable clips are facing

down. Insert Monitor Arms (F) into Center Monitor Arm (F) as shown below. Secure using

M10x47mm Screws (S-A) and 6mm Allen Wrench (T-C).

Press Monitor Arm Covers (J) onto the top and bottom of arm joints. Place Cable Clips (M) into wire

clip holes.

Cable Clip

Hole

Cable Clip

Hole

Cable Clip

Hole

NOTE: Transparent monitor arm image used to show wire

clip holes. Holes are on the underside of arms and are not

visable when arm is facing upright.

Cable Clip

Hole

Cable Clip

Hole

Cable Clip

Hole

Lay Monitor Arm (F) on flat surface with holes for cable clips facing down. Add Plastic Spacers (L)

to holes at ends of Monitor Arm (F).

NOTE: Transparent monitor arm image used to show cable clip holes. Holes are on the underside of

arms and are not visable when arm is facing upright.

S-A

T-C

STEP 3

Slide arm assembly onto Pole (A) at desired height and secure using M8x10mm Screws (S-E) and

5mm Allen Wrench (T-B).

Center VESA Plate (P) Installation

STEP 4a - Flat Back Monitors

Side VESA Plate (O) Installation

Attach the Center VESA Plates (P) to the monitors you intend to mount in the center of the mount.

Attach Side VESA Plates (O) to remaining monitors. Secure using M4x12mm Screws (M-A).

M-A

NOTE: Hand tighten screws to avoid stripping the plastic screw heads.

S-E

T-B

S-E

STEP 4b - Curved/Recessed Back Monitors

Attach the Center VESA Plates (O) to the monitors you intend to mount in the center of the mount.

Attach Side VESA Plates (N) to remaining monitors. Secure using M4 Spacers (M-C), M4x30mm

Screws (M-B) and a Phillips screwdriver.

Center VESA Plate (O) Installation Side VESA Plate (N) Installation

M-BM-B

M-C

STEP 5

Slide the center monitors onto the Center Head (E1) and Mount (G). Install M4x6mm Screws (S-G) to

secure the monitors.

S-G

STEP 6

Slide the outer monitors onto Outer VESA Heads (F1). Secure

with Cap Nut (S-F).

S-F

Adjust Monitor Tilt

Pry o Plastic Covers (F2) from the Outer VESA Heads (F1). The exposed nut

on the side is used to adjust the tilt. Tighten the nut using Wrench (T-D) to

adjust. Replace Plastic Covers (F2).

To adjust center monitor swivel or tilt, use

3mm Allen Wrench (T-A) to loosen center

set screw on the Center Head (E1) and

Mount (G), as shown at le.

T-D

T-A

Adjust Monitor Height

To adjust center monitor height, turn the

screw behind Center Head (E1) and Mount

(G) using the 5mm Allen Wrench (T-B).

To level the side monitors, remove

the Cap Nut (S-F) and turn the inner

bolt with the 3mm Allen Wrench (T-A)

to raise or lower the monitor. Replace

Nut aer the adjustment.

T-B

T-A

To adjust swivel joint tension, remove the Monitor Arm Cover (J) and turn the bolt underneath with

the 5mm Allen Wrench (T-B.

Other manuals for STAND-V104A

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 