Vivo STAND-V003V User manual
Triple Vertical Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v003v
SKU: STAND-V003V
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
A (x1)
Pole Set
B(x1)
Clamp
C(x1)
Clamp Brace
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x3)
Monitor
Bracket
E (x3)
VESA Plate
F (x3)
M5x14
G (x2)
M8x12
H (x3)
M4x6
I (x1)
M10 Washer
J (x1)
Spring Washer
K (x1)
Grommet Base
Plate
L (x3)
Wire Clip
M(x1)
Allen Key set
N (x12)
M4x12
Thumbscrew
O (x12)
M4x30
P (x12)
M4 Spacer
Q1 (x1)
So Pad
Q2 (x1)
So Pad
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
3
ASSEMBLY STEPS
TOOLS NEEDED
Phillips
Screwdriver
PRE-ASSEMBLY
STEP 1
33 lbs
(15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
Drill
Option A: Desk Clamp Install
1. Install the clamp brace (C) to the pole (A) using x3 M5x14 bolts (F). See Figure 1.
2. Attach so pad (Q1) to the clamp brace (C) , see Figure 2.
3. Install the clamp (B) to the pole assembly according to the thickness of the desktop. The
thickness can be changed to 3 positions. Connect using x2 M8x12 bolts (G) and tighten using the
Allen key (M). Tighten the clamp to the desktop using the plastic knob. See Figure 3.
a
Figure 1 Figure 2
C
A
G
FM
Q1 B
Thread the Pole Set (A) together as shown below.
4
STEP 1 (Continued)
STEP 2
Install Monitor Bracket (D) to the Pole (A). Fasten the bolt with supplied Allen Key (M). Attach the
Wire Clip (L) to the pole (A).
B1
B2
B2
B1
a
m
f
Figure 4
t2 Figure 5
a
m
f
Figure 4
t2 Figure 5
A
K
J
I
Q2
Option B: Grommet Install
1. If desk does not have an existing grommet
hole, drill a 3/8” (10mm) diameter hole at the
desired position through the mounting surface.
2. Completely disassemble clamp (B) into
individual parts. Set knob (B1) and clamp
plate (B2) aside for later use. The L bracket,
bolt, washer and bushing will not be used.
3. Install grommet base plate (K) to the pole (A)
using x3 M5x14 bolts (F). See Figure 4.
4. Attach so pad (Q2) to the grommet base plate
(K), see Figure 5.
5. Position pole (A) on the mounting surface
and secure using the clamp plate (B2), spring
washer (J), M10 washer (I) and knob (B1). See
Figure 6.
M
A
L
F
D
5
STEP 3
OPTION A: Flat Back Monitor
OPTION B: Curved Back Monitor
For flat back monitor, install VESA Plate (E) to
monitor using thumbscrews (N).
NOTE: Hand tighten screws to avoid over
tightening.
For curved back monitor, install
VESA Plate (E) to monitor using bolts
(O) and spacers (P).
NOTE: Gently tighten using a screwdriver
N
P
O
E
E
6
STEP 4
Slide the monitor onto the head of Monitor Bracket (D) as shown in the above diagram.
Install the M4x6 Bolt (H). Make sure the bolt is installed before you rotate the monitor.
H
D
7
STEP 5
Fasten the grub screw in Monitor Bracket to fix the tilting angle by provided Allen Key (M). Manage the
wires as shown in the diagram below.
grub
scre w
M
LAST UPDATED: 09/17/2020
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Table of contents
Other Vivo Rack & Stand manuals
Vivo
Vivo STAND-V101A User manual
Vivo
Vivo PP-3-T072D/G User manual
Vivo
Vivo STAND-V003D User manual
Vivo
Vivo STAND-VAD2 User manual
Vivo
Vivo STAND-V102D User manual
Vivo
Vivo STAND V001L User manual
Vivo
Vivo STAND-TV01L User manual
Vivo
Vivo STAND-V003T User manual
Vivo
Vivo STAND-TV00T User manual
Vivo
Vivo STAND-TV00L User manual
Vivo
Vivo STAND-V102C User manual
Vivo
Vivo STAND-V101F User manual
Vivo
Vivo MOUNT-HP03 User manual
Vivo
Vivo DESK-100E-RB User manual
Vivo
Vivo STAND-TS38C User manual
Vivo
Vivo STAND-V001F User manual
Vivo
Vivo STAND-V001Q User manual
Vivo
Vivo MOUNT-CUB1 User manual
Vivo
Vivo MOUNT-KB05P User manual
Vivo
Vivo MOUNT-KB35B User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
