Vivo PP-DK12B User manual

Black Clamp-on Desk Back Panel & Accessory Holder

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/pp-dk12b

SKU: PP-DK12B

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

PACKAGE CONTENTS

WARNING!

A (x2)

Peg Board

TOOLS NEEDED

Phillips

Screwdriver

B (x1)

Lower Pole

D (x1)

Connecting

Bracket

S-A (x2)

M6x16mm

Screw

S-C (x5)

M6x25mm

Screw

C (x1)

Upper Pole

S-B (x2)

M6x8mm

Screw

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

S-E (x4)

M6x5mm

Screw

S-D (x5)

M6 Washer

G (x1)

Shelf

F (x1)

Clamp

E (x1)

Clamp Brace

T-A (x1)

4mm Allen Wrench

T-B (x4)

Ziptie

H (x1)

Pole Cap

I (x1)

Pad

J (x2)

Shelf

Hook

L (x1)

Square Edge

Hook

K (x1)

Straight Hook

M (x4)

Magnet

N (x1)

Clip

Above Mounting

Single Panel Assembly (pg 3-4)

Double Panel Assembly (pg 3, 5-6)

Above & Under Mounting

Double Panel Assembly (pg 7)

Accessory Placement

All Assembly Options (pg 8-9)

Under Desk Cable Management

Single Panel Assembly (pg 8-9

Double Panel Assembly (pg 8-9)

ASSEMBLY OPTIONS:

STEP 2a: Single Panel Assembly

HORIZONTAL ORIENTATION

S-D

S-C

Choose horizontal or vertical installation orientation and connect Peg Board (A) and Connecting

Bracket (D) to front of Lower Pole (B) using M6x25mm Screws (S-C), M6 Washers (S-D) and 4mm

Allen Wrench (T-A). Place Pole Cap (H) on top of Lower Pole (B).

NOTE: Use the top hole on the Connecting Bracket (D). The bottom hole will not be used

VERTICAL ORIENTATION

S-D

S-C

STEP 1

Connect Lower Pole (B) and Pad (I) to Clamp Brace (E) using M6x16mm Screws (S-A) and 4mm Allen

Wrench (T-A). Secure Clamp (F) to Clamp Brace (E) using M6x8mm Screws (S-B) and 4mm Allen

Wrench (T-A). NOTE: Make sure the pegboard holes are facing forward as shown below.

T-A

S-B

T-A

S-A

ASSEMBLY OPTION A: Above Mounting Only

VERTICAL ORIENTATION

HORIZONTAL ORIENTATION

Choose horizontal or vertical installation orientation and connect Peg Board (A) and Connecting

Bracket (D) to Lower Pole (B) using M6x25mm Screws (S-C), M6 Washers (S-D), and 4mm Allen

Wrench (T-A).

Note: Use bottom hole of Connecting Bracket (D).

Connect Upper Pole (C) to Peg Board (A)

and Connecting Bracket (D) using M6x25mm

Screws (S-C), M6 Washers (S-D) and 4mm

Allen Wrench (T-A).

Slide Upper Pole (C) into Connecting Bracket (D).

S-C

S-D

STEP 2b: Double Panel Assembly

S-C

S-D

VERTICAL ORIENTATIONHORIZONTAL ORIENTATION

Connect second Peg Board (A) to Upper Pole (C) using M6x25mm Screws (S-C), M6 Washers (S-D),

and 4mm Allen Wrench (T-A). Attach Pole Cap (H) to top of Upper Pole (C).

STEP 2b: Double Panel Assembly (Continued)

S-D

S-C

Connect Peg Board (A) and Connecting Bracket (D) to Lower Pole (B) using M6x25mm Screws (S-C),

M6 Washers (S-D) and 4mm Allen Wrench (T-A). Attach other Peg Board (A) to back of Clamp Brace (E)

using M6x5mm Screws (S-E) and a Phillips screwdriver. Place Pole Cap (H) on top of Lower Pole (B).

NOTE: Use the top hole on the Connecting Bracket (D). The bottom hole will not be used

STEP 2

S-D S-E

S-C

ASSEMBLY OPTION B: Above & Below Mounting

STEP 1

Connect Lower Pole (B) and Pad (I) to Clamp Brace (E) using M6x16mm Screws (S-A) and 4mm Allen

Wrench (T-A). Secure Clamp (F) to Clamp Brace (E) using M6x8mm Screws (S-B) and 4mm Allen

Wrench (T-A).

NOTE: Make sure the pegboard holes are facing forward as shown below.

T-A

S-B

T-A

S-A

ASSEMBLY OPTION C: Under Desk Cable Management

S-B

T-A

Secure Clamp (F) and Pad (I) to Clamp Brace (E) using M6x8mm Screws (S-B) and 4mm Allen

Wrench (T-A).

STEP 1

S-E

T-B

Connect Peg Board (A) to front of Clamp Brace (E) using M6x5mm Screws (S-E) and a Phillips

screwdriver. Use provided Zip Ties (T-B) for managing under desk cables.

STEP 2a: Single Panel

S-E

T-B

Connect Peg Boards (A) to front of Clamp Brace (E) using M6x5mm Screws (S-E) and a Phillips

screwdriver. Use provided Zip Ties (T-B) for managing under desk cables.

STEP 2b: Double Panel

ACCESSORY PLACEMENT

Shelf Mounting

Place Shelf Hooks (J) at desired height on Peg Board (A) and then place Shelf (G) on Hooks so that

magnets on edge make contact with Peg Board (A).

Note: Accessories can be placed and used as

desired. The following steps shows one way to

mount/install accessories and uses the double

panel horizontal assembly as an example.

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 