Velleman CAMIP16 User manual

CAMIP16

2 MP SOLID LIGHT IR VARIFOCAL BULLET IP CAMERA

CYLINDRISCHE IP-INFRAROODCAMERA MET

VARIFOCALLENS EN SOLID LIGHT-FUNCTIE (2MP)

CAMÉRA IP CYLINDRIQUE INFRAROUGE AVEC OBJECTIF

VARIFOCAL ET FONCTION SOLID LIGHT (2 MP)

CÁMARA IP CILÍNDRICA CON LENTE VARIFOCAL Y

FUNCIÓN SOLID LIGHT (2MP)

ZYLINDRISCHE IP-KAMERA MIT VARIFOKALLINSE UND

SOLID LIGHT-FUNKTION (2MP)

QUICK INSTALLATION GUIDE 5

KORTE HANDLEIDING 20

GUIDE D'INSTALLATION RAPIDE 35

GUÍA RÁPIDA 51

SCHNELLEINSTIEG 67

CAMIP16

V. 02 –10/12/2014 2 ©Velleman nv

CAMIP16

V. 02 –10/12/2014 3 ©Velleman nv

CAMIP16

V. 02 –10/12/2014 4 ©Velleman nv

28a

28b

28c

CAMIP16

V. 02 –10/12/2014 5 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, do

not install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Risk of electroshock when opening the cover. Touching live wires

can cause life-threatening electroshocks. Do not disassemble or

open the housing yourself. Have the device repaired by qualified

personnel.

There are no user-serviceable parts inside the device. Refer to an

authorized dealer for service and/or spare parts.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

Keep this device away from dust and extreme heat.

Protect this device from shocks and abuse. Avoid brute force when

operating the device.

Familiarise yourself with the functions of the device before actually

using it.

All modifications of the device are forbidden for safety reasons.

Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

CAMIP16

V. 02 –10/12/2014 6 ©Velleman nv

DO NOT use this product to violate privacy laws or perform other illegal

activities.

4. Overview

Refer to the illustrations on page 2 of this manual.

lens

sun shield

non-PoE router/hub

vandal-proof bracket

8P8C network cable

bracket screw holes

PoE injector

camera front cover

8P8C network cable

focal length screw

power

focus screw

NVR

desiccant

LAN SWITCH connector

sun shield installation

8P8C network cable

microSD card

router/hub

8P8C network cable

PoE router/hub

cameras

8P8C network cable

28a

horizontal adjustment

8P8C network cable

28b

vertical adjustment

power

28c

rotational adjustment

5. Installation

1. Choose a location for the camera, keeping following guidelines in mind:

oDo not install the camera in locations where extremely high or low

temperatures or excessive vibrations may occur.

oAvoid mounting the camera near high electro-magnetic fields.

oDo not aim the camera at the sun or other extremely bright objects

or reflections (e.g. metal doors).

2. Use the mounting bracket [3] to determine the location of the

mounting holes. Drill the holes and secure the bracket using

3 screws [4].

3. Point the camera towards the field of interest [28a, 28b, 28c].

CAMIP16

V. 02 –10/12/2014 7 ©Velleman nv

6. Focal Length Selection and Focus

Adjustment

Notes:

We recommend adjusting the focal length and focus at an ambient

temperature between 0 and 40 °C.

Finish the adjustment as quickly as possible (max. 10 minutes) to

prevent that excess humidity builds up inside the camera, and the

desiccant absorbs too much moisture and is unable to keep the camera

dry.

Avoid adjusting in a high moisture environment. If this is not possible,

then finish the adjustment as quickly as possible.

To adjust focal length and focus, proceed as follows:

1. Open the front cover [5] of the camera by rotating it counter-clockwise.

Inside the camera, you see two handles to adjust the focal length [6]

and focus [7].

2. Loosen the screw of the handle, rotate to adjust, then tighten the screw

again.

3. Find the fresh desiccant (incl.) and place it in the camera as shown in

the illustration [8].

4. Immediately place back the front cover of the camera and turn it clock-

wise to fasten it.

Note: Make sure the front cover is fastened well to prevent moisture

from entering the camera.

5. Slide the sun shield over the camera [9].

7. Installing the microSD Card

Caution:

The data on the microSD card will be deleted after inserting the card

into the camera.

The camera does not support hot swapping. Insert or remove the card

with the power disconnected.

Insert the card into the camera as shown in the illustration [10]. It is

recommended to use tweezers for inserting or removing the card.

8. Connections

Cable Overview

Refer to the illustrations on page 3 of this manual.

8P8C network cable: to connect the camera to the router/hub. For PoE

installation, use only CAT.5e or CAT.6 cables, according to the

IEEE802.3af standard.

CAMIP16

V. 02 –10/12/2014 8 ©Velleman nv

alarm in (yellow): for external alarm connection

GND (brown): ground wire

RESET (red): remove the insulation from the wire, and twist it together

with a ground wire to reset the camera to the default settings.

GND (black): ground wire

alarm out (pink): for external alarm connection

power cable

Power Supply using PoE (Power over Ethernet)

The camera features PoE (Power over Ethernet). If your router or hub

supports PoE, you do not need to connect the camera to a power socket.

You can then connect the camera as shown in illustration [X]:

1. Use a network cable [14]to connect your camera to a PoE port of your

router/hub [12].

2. Make sure your router/hub is connected to a power socket [15].

If your router/hub does not support PoE, you can use a PoE injector (not

included) to use the PoE feature. You can then connect the camera as

shown in illustration [Y].

For connecting to a network video recorder (NVR), refer to illustration [Z].

9. Configuration with PC

1. For advanced camera configuration, make sure that your camera is

connected to a PC via the network. Refer to illustrations [X] and [Y].

2. Download and install the “IPscan.exe” program. You can download the

program from:

http://www.surveillance-download.com/user/IPscan.zip

3. Run the program to scan for available devices.

4. Set your PC in the same network segment as the camera that you want

to configure. Example: 192.168.2.xxx (where xxx = 0-255).

5. Note down the IP address and port number of the camera. In this

example, the IP address is 192.168.2.1 and the port number is 88.

CAMIP16

V. 02 –10/12/2014 9 ©Velleman nv

6. Open Internet Explorer on the PC, and enter the IP address and port

number in the URL box to access the camera in the following format:

http://ipaddress:portnumber

Example:

http://192.168.2.1:88

7. For details on the configuration of your camera, refer to the full user

manual on the CD-ROM.

10. Configuration with EagleEyes Mobile App

The installation method below describes the setup with an iPhone®with a

D-Link®wireless router and modem. The installation procedure is similar for

iPad®or Android™ devices. Refer to the full manual on the included CD-ROM

for more information.

10.1 Prerequisites

Before proceeding, check the following:

We recommend that you use your own ADSL or cable internet service

for easy network configuration.

Your camera is connected to your wireless router with an 8P8C network

cable, and it is powered on.

EagleEyes-Lite or EagleEyes-Plus is installed on your device.

If not, download it from your device’s app store.

Note: EagleEyes HD for iPad does not support network configuration.

Please install EagleEyes-Lite or EagleEyes Plus on your iPad instead.

10.2 Preparing the Network Configuration

1. Connect your camera to your wireless router using an 8P8C network

cable (see “Overview” above).

2. Write down the IP address of your wireless router. You will need it

later. To find the IP address, proceed as follows:

3. Connect your mobile device to the wireless router that has the camera

connected.

4. Go to Settings > WiFi.

5. Press the “>” button to see the details of the selected wireless network.

The IP address is visible next to “Router”.

(In the sample screen, the IP address is 192.168.2.1)

CAMIP16

V. 02 –10/12/2014 10 ©Velleman nv

10.3 Adding Your Camera to the EagleEyes App

1. Establish a wireless connection between your mobile device and the

wireless router that has the camera connected.

2. Open the EagleEyes app and click the “+” button to add a new device.

3. Select “Local Network Search” to search for the camera.

The device will show a list

of devices on the network.

The displayed IP address is

the address that your

router assigned to your

camera.

4. Select the camera from the list. The settings page appears.

5. Change the port number of the camera as needed. The default port

number is 88. If port number 88 is blocked, you can change it to any

value between 1-9999 (for example 8080).

6. Write down the IP address and the port number of the camera. You

will need them later.

(In the sample screens below [A], the IP address is 192.168.2.197 and

the port number is 88.)

7. Press “Apply” to confirm your settings.

Table of contents

Languages:

Other Velleman IP Camera manuals

Velleman

Velleman camip5 User manual

Velleman

Velleman CAMIP5N1 User manual

Velleman

Velleman CAMCOLBUL21 User manual

Velleman

Velleman CAMIP7N User manual

Velleman

Velleman CAMIP5N User manual

Velleman

Velleman CAMIP15 User manual

Velleman

Velleman CAMIP10N User manual

Velleman

Velleman CAMIP20N User manual

Velleman

Velleman CAMIP14n User manual

Velleman

Velleman CAMIP4N User manual

Velleman

Velleman CAMIP3 User manual

Velleman

Velleman CAMIP23 User manual

Velleman

Velleman CAMCOLBUL15 User manual

Velleman

Velleman CAMIP4 User manual

Velleman

Velleman CAMCOLBUL17 User manual

Velleman

Velleman CAMCOLBUL18 User manual

Velleman

Velleman CAMCOLBUL22N User manual

Velleman

Velleman CAMCOLBUL16 User manual

Velleman

Velleman CAMIP7N User manual

Velleman

Velleman AVTECH CAMIP16N User manual

Velleman

Velleman CAMCOLIRP2 User manual

Velleman

Velleman CAMIP21 User manual

Velleman

Velleman CAMIP20 User manual

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual