@
+91 7046223333 , 9427301436
www.utplindia.in
www
UT-1405
TEMP. AND DIFF. PRESS. INDICATOR
8
ON
OFF PV
Low-Low & Low
NORMAL
VALUE
LOLL
ON
OFF PV
High & High-High
NORMAL
VALUE
High HH
Values are : - Low Low, - Low, - High, - High High.LL Lo H1GH HH
‘Configuration Mode’ will shown by pressing key in the Normal Mode.
4.1 Configuration Mode
4. OPERATIONAL MODES
Scroll the digit by key, Increase by key.
1. : CONFIGURATION MODE PASSWORDPASS
Password for Mode ParametersConf
Default Password for access Config. mode : 1357
2. : ALARM TYPEaLTY
Alarm type of particular Input.
Press key to access sub parameters, the alarm type are as follows :
I. : Input 1 [TEMP.] Alarm 1 Type.1sp1
Default type should be : Lo
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
II. : Input 1 [TEMP.] Alarm 2 Type.
1sp2
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
III. : Input 1 [TEMP.] Alarm 3 Type.
1sp3
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
IV. : Input 1 [TEMP.] Alarm 4 Type.
1sp4
Values are : - Low Low, - Low, - High, - High High.LL Lo H1GH HH
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
VI. : Input 2 [DP] Alarm 2 Type.
2sp2
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
VII. : Input 2 [DP] Alarm 3 Type.
2sp3
Values are : - Low Low, - Low, - High, - High High.LL LO H1GH HH
VIII. : Input 2 [DP] Alarm 4 Type.
2sp4
V. : Input 2 [DP] Alarm 1 Type.2sp1
Default type should be : H1GH
Default type should be : LL
Default type should be : HH
Default type should be : Lo
Default type should be : H1GH
Default type should be : LL
Default type should be : HH
