TYAN TEMPEST I5000PX User manual

Tempest i5000PX /// S5380

Version 1.0

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Tempest i5000PX are trademarks of TYAN Computer Corporation.

Intel, Blackford, and combinations thereof are trademarks of Intel Corporation.

Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

Table of Contents

Check the box contents! 3

Chapter 1: Introduction

1.1 Congratulations…………………………………………………………… 5

1.2 Hardware Specifications………………………………………………… 5

Chapter 2: Board Installation

2.1 Board Image……………………………………………………………… 8

2.2 Block Diagram……………………………………………………………. 9

2.3 Board Parts, Jumpers and Connectors………………………………... 10

2.4 Tips on Installing Motherboard in Chassis…………………………….. 20

2.5 Installing the Processor(s)………………………………....................... 21

2.6 Installing the Memory……………………………………………………. 24

2.7 Attaching Drive Cables………………………………………………….. 26

2.8 Installing Add-in Cards………………………………............................ 28

2.9 Connecting External Devices…………………………………………… 29

2.10 Installing the Power Supply……………………………………………... 30

2.11 Finishing up………………………………………………………………. 30

Chapter 3: BIOS Setup

3.1 About the BIOS…………………………………………………………… 31

3.2 BIOS Main Menu…………………………………………………………. 33

3.3 Advanced Menu………………………………………………………….. 41

3.4 Security Menu…………………………………………………………….. 54

3.5 Power Menu………………………………………………………………. 55

3.6 Boot Menu………………………………………………………………… 56

3.7 Exit Menu…………………………………………………………………. 57

Chapter 4: Diagnostics

4.1 Beep Codes………………………………………………………………. 59

4.2 Flash Utility……………………………………………………………….. 59

4.3 BIOS Post Code………………………………………………………….. 60

Appendix I: SMDC Information

Appendix II: How to Make a Driver Diskette

Glossary

Check the box contents!

1x S5380 motherboard

1x 34-Pin floppy drive cable

1 x Ultra-DMA-133/100/66/33 IDE cable

3 x Serial ATA power cable

6 x Serial ATA Cable

1 x USB2.0 cable

1 x COM Port Cable

1 x S5380 user’s manual

1 x S5380 Quick Reference guide

1 x TYAN driver CD

1 x I/O shield

2 x CPU Back Plane

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. The Tempest

i5000PX (S5380) is a flexible Intel®platform for multiple applications, based on

Intel®“Blackford” MCH and ESB2 chipsets.

Designed to support Intel®Dempsey/Woodcrest processors and max 16GB

DDR2-533/667 FB-DIMM memory, and featured with integrated Dual Gigabit

Ethernet LAN, PCI-Express, PCI/PCI-X 32/64bit PCI bus plus six serial ATA

ports, the S5380 offers exceptional performance and versatile solution for your

server platform.

Remember to visit TYAN’s Website at http://www.TYAN.com. There you can

find information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processors

•Dual LGA771 sockets

•Supports up to two (x2) Intel®

Dempsey/Woodcrest processors

with1066/1333 MHz FSB

•VRM 11.0

Chipset

•Intel®“Blackford” MCH+ESB2

chipset

•Supports for 1066/1333 MHz FSB

•Winbond 83627HF super I/O chip

Memory

•Eight (x8) 240-pin DDR2 FBDIMM*

sockets

•Maximum of 16GB DDR2-533/667

FB-DIMM

*FB-DIMM: Fully Buffered DIMM

Expansion Slots

Integrated Video Controller

•ATI ES1000

•PCI interface

•32MB DDR memory

Integrated LAN Controllers

•One (x1) Intel Gigal network

controller

- Direct link to ESB2

•Two (x2) Gilgal LAN ports

•Two (x2) front panel LED headers

Intelligent Platform

Management Interface (Option)

Baseboard Management Controller

(BMC) from daughter card M3291

•Tailored for IPMI 2.0 specification

•Supports remote power on/off and

reset support (IPMI-over-LAN)

•Server Management Daughter

card via built-in 2x25 header

•Two (x2) 64/133 PCI-X slots

- One inversed PCIe x4 slot (w/ x8

signals from ESB2) for risers, in-

lined with the 1st PCI-X slot

•Two (x2) PCI Express x16 slot

(w/ x8 signals from Blackford

MCH)

•One (x1) PCI Express x8 slot (w/

x4 signals from ESB2)

•Five expansion slots in total

Integrated I/O

•One (x1) 9-pin 16550 UART serial

port

•One (x1) 15-pin VGA port

•One (x1) IDE port

•One (x1) Floppy port

•Total Eight (8) USB 2.0 ports (6 in

rear and 2 onboard with vertical

USB Type A connectors

- One (x1) 2-USB-port connector

- Two (x2) 2-USB-port + 1 RJ45

10/100/1000 LAN port

•PS/2 mouse & keyboard

connectors

•Standard/integrated SATA

connectors

System Management

•Analog Devices ADT7468

Hardware Monitor ASIC

•CPU thermal & voltage monitor

support

•2-pin chassis intrusion header

•Multiple 4-pin and 3-pin fan

monitoring headers

Integrated SATA 2.0 Controller

•Six SATA 2.0 ports from Intel

ESB2

•Integrated RAID 0/1/5 support

BIOS

•PhoenixBIOS on 8Mbit Flash

ROM

•Support APM 1.2, ACPI 1.0b

•Serial Console Redirect

•PXE via Ethernet, USB device

boot

•PnP, DMI 2.0, WfM 2.0 power

management

•User-configurable hardware

monitoring

•Auto-configuration of hard disk

types

•Multiple boot options

•48-bit LBA support

Form Factor

•SSI/Entended ATX (12” x 13”)

•EPS 12V/SSI (24+8+4 pin) power

connectors

•Stacked PS/2 keyboard and

mouse connectors

•Stacked USB 2.0 connectors (x2)

•Serial (x1) and VGA (x1)

connectors

•Two (x2) side-by-side stacked RJ-

45 LAN + Two (x2) USB ports

connectors with LEDs

Regulatory

•FCC Class B (DoC)

•European Community CE (DoC)

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of

the Tempest i5000PX S5380 matches the SSI CEB v1.01 specification. Before

continuing with installation, confirm that your chassis supports an SSI CEB

v1.01 motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

2.2 - Block Diagram

Tempest i5000PX S5380 Block Diagram

2.3 - Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

This manual suits for next models

Table of contents

Other TYAN Motherboard manuals

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual