TYAN S8005 User manual
S8005
Version 1.1
Copyright
Copyright © 2011 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN®is a trademark of MiTAC International Corporation.
Intel®is a trademark of Intel®Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft®, Windows®are trademarks of Microsoft Corporation.
Winbond®is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN®products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
Contents
Before you begin…....................................................................................3
Chapter 1: Instruction ................................................................................5
1.1 Congratulations .................................................................................5
1.2 Hardware Specifications....................................................................5
1.3 AST2050 Application.........................................................................7
Chapter 2: Board Installation.....................................................................9
2.1 Board Image....................................................................................10
2.2 Block Diagram.................................................................................11
2.3 Board Parts, Jumpers and Connectors...........................................12
2.4 Installing the Processor...................................................................23
2.5 Heat sink Installation .......................................................................24
2.6 Thermal Interface Material ..............................................................25
2.7 Heatsink Installation Procedures.....................................................26
2.8 Finishing Installing the Heat sink.....................................................27
2.9 Tips on Installing Motherboard in Chassis ......................................28
2.10 Installing the Memory ....................................................................30
2.11 Attaching Drive Cables..................................................................32
2.12 Installing Add-In Cards..................................................................34
2.13 Connecting External Devices ........................................................35
2.14 Installing the Power Supply...........................................................36
2.15 Finishing Up...................................................................................37
Chapter 3: BIOS Setup .............................................................................39
3.1 About the BIOS................................................................................39
3.2 BIOS Main Menu.............................................................................41
3.3 BIOS Advanced Menu.....................................................................42
3.4 PCI/PnP...........................................................................................59
3.5 Boot .................................................................................................61
3.6 Security............................................................................................64
3.7 Chipset ............................................................................................65
3.8 Power...............................................................................................74
3.9 Exit...................................................................................................75
Chapter 4: Diagnostics.............................................................................77
4.1 Beep Codes.....................................................................................77
4.2 Flash Utility......................................................................................77
4.3 AMIBIOS Post Code........................................................................78
Glossary.....................................................................................................81
Technical Support ....................................................................................87
http://www.tyan.com
3
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
S8005 Motherboard
6 x Serial ATA Cable
1 x SAS Cable (for S8005WAGM2NR SKU only)
USB2.0 Cable
S8005 User’s manual
S8005 Quick reference guide
TYAN®Driver CD
I/O shield
Retention Module
http://www.tyan.com
4
NOTE
http://www.tyan.com
5
Chapter 1: Instruction
1.1 Congratulations
You have purchased one of the most powerful TYAN® S8005 motherboard.
Based on AMD®chipsets, the S8005 is designed to support AMD®AM3 Socket
processors and four DDR3 un-buffered, ECC DDR3 1333/1066/800/667MHz
memory, providing a rich feature set and incredible performance. Leveraging
advanced technology from AMD®, the S8005 is capable of offering scalable 32
and 64-bit computing, high-bandwidth memory design, and lightning-fast PCI-E
bus implementation.
The S8005 not only empowers you in today’s demanding IT environment but
also offers a smooth path for future application usage. All of this provides
S8005 the power and flexibility to meet the needs of nowadays application.
Remember to visit TYAN®’s website at http://www.tyan.com. There you can find
information on all of TYAN®’s products with FAQs, online manuals and BIOS
upgrades.
1.2 Hardware Specifications
Supported CPU Series AMD Opteron™ 1000 series Quad
Core CPU’s
Socket Type / QTY uPGA 941-pin AM3 socket / (1)
Average CPU Power
(ACP) wattage 75W
Processor
System Bus HT3 @ (17.6GB/s) 4.4GT/s
IOH / SB AMD SR5670(SR5650)/ SP5100
Chipset Super I/O Winbond W83627DHG-P
Supported DIMM Qty (4) DIMM slots
DIMM Type / Speed Unbuffered ECC DDR3
667/800/1066/1333*
Capacity Up to 16GB
Memory channel Dual Channel
Memory voltage 1.5V
Memory
Note: 1333MHz limit 1/Channel, if 2/channel max speed will
be 1066MHz
Expansion Slots PCI-E (1) PCI-E x16 slot
(1) PCI-E x8 slot (for SR5670
SKU)
Recommended
Barebones / Chassis 1U Barebones GT14-B8005
Port QTY (2)
LAN Controller Intel 82574L
http://www.tyan.com
6
Connector (6) SATA
Controller SP5100
Speed 3.0 Gb/s
SATA Note: SATA CD-ROM must be connected to port 5 or 6 under
AHCI mode.
Connector (4) SAS
Controller Marvell 88SE6440
Speed 3.0 Gb/s
SAS
RAID RAID 0/1/10/5
Channel Single channel
Storage
IDE Controller SP5100
Connector type D-Sub 15-pin
Resolution 1600x1200 @60 Hz 16bpp
Graphic Chipset Aspeed AST2050
Chipset Realtek ALC262
Audio Feature High Definition Audio
USB (7) USB2.0 ports (4 at rear, 2 via cable, 1
vertical)
COM (2) ports (1 at rear, 1 via cable)
PS/2 (1) PS/2 connector
SAS (4) SAS connectors (for SAS SKU only)
VGA (1) D-Sub 15-pin VGA port
Audio (1) 2x5-pin front panel audio header
(1) 3 port rear audio jack (Line-in/Line-out/Mic)
RJ-45 (2) GbE ports
LCM (1) 3x2-pin LCD module header
Power EPS12V 24-pin + 8-pin power connectors
Front Panel (1) 2x12-pin TYAN front panel header (TYAN-
SSI)
IPMB (1) 1x4-pin header
IDE (1) IDE connector
Input /Output
SATA (6) SATA-II connectors
Chipset Winbond W83627DHG-P
Voltage Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (4) 4-pin headers
Temperature Monitors temperature for CPU & system
environment
LED Fan fail LED indicator / Over temperature
warning indicator / Fan & PSU fail LED indicator
System
Monitoring
Others Chassis intrusion detection / Watchdog timer
support
Brand / ROM size AMI / 2MB
BIOS Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0
/SMBIOS2.3 /PXE boot / ACPI 2.0 power
management /Power on mode after power
recovery / User-configurable H/W monitoring /
Auto-configurable of hard disk types / Multiple
http://www.tyan.com
7
boot options
Form Factor ATXForm Factor Board Dimension 9.6" x 12” (244mm x 305mm)
Operating
System OS supported list Please refer to our web site for the OS
supported list.
FCC (DoC) Class B
Regulation CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment In/Non-operating
Humidity 90%, non-condensing at 35° C
RoHS RoHS 6/6 Complaint Yes
Motherboard (1) S8005 Motherboard
Manual (1) User's manual / (1) Quick Ref. Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables / (2) SAS signal cables
Package
Contains
Cable USB (1) USB bracket cable
Optional
accessories for
future upgrade Riser Card M2061, PCI-E x8 to PCI-X 1U riser card (left)
M2083-RS, PCI-E 1U riser card (left)
1.3 AST2050 Application
Please visit the TYAN Web Site at http://www.tyan.com to download the latest
AST2050 User’s Guide.
http://www.tyan.com
8
NOTE
http://www.tyan.com
9
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is reading this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
NOTE: Do not apply power to the board if it has been damaged.
http://www.tyan.com
10
2.1 Board Image
This picture is representative of the latest board revision available by the time of
publishing. The board you receive may not look exactly like the above picture.
Table of contents
Other TYAN Motherboard manuals
TYAN
TYAN Tempest i5000XT S2696 User manual
TYAN
TYAN Tsunami S1846S User manual
TYAN
TYAN S5517 User manual
TYAN
TYAN S2692 User manual
TYAN
TYAN TIGER MPX User manual
TYAN
TYAN Tiger MPX S2466 User manual
TYAN
TYAN TAHOE AT User manual
TYAN
TYAN THUNDER K8QS PRO User manual
TYAN
TYAN TEMPEST II User manual
TYAN
TYAN Tiger K8W S2875 User manual
TYAN
TYAN TOMCAT K8E-SLI User manual
TYAN
TYAN S5548 User manual
TYAN
TYAN S8232 User manual
TYAN
TYAN S5512 User manual
TYAN
TYAN Thunder i7500 Pro S2721 User manual
TYAN
TYAN Thunder n3600W S2935 User manual
TYAN
TYAN S1837 User manual
TYAN
TYAN TIGER K8SSA User manual
TYAN
TYAN S8030 User manual
TYAN
TYAN S3227 User manual
