TW Audio B30i User manual
Operation manual
B30i
Operation manual B30i
2
Introduction
Thank you for choosing a high-quality product “MADEIN GERMANY” from TW AUDiO.
The B30 touring version set a standard in footprint to output ratio to this day. The logical con-
sequence is to integrate this loudspeaker also as an install version in the TW AUDiO range.
The hybrid construction of our B30i with 2× 15“ speakers combines the advantages of bass
reflex and horn systems – high efficiency, great range and a deep low frequency limit.
The connection to the acoustic field happens over the entire front area thus reducing air fric-
tion and flow losses to a minimum. The result is efficient energy transfer with simultaneous
controlled impulse reproduction and excellent dynamics.
And at about 36kg (80 lbs) the B30i is a lightweight. The relation of its size, weight and output
turns this TW AUDiO classic into something special.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this assembly guide. If you require additional copies of this manual,
you can obtain them free of charge from TWAUDiO or download them from www.twaudio.de
Instructions in this user manual
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
NOTE
CAUTION
WARNING
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation for persons with a pacemaker. Failure to comply with this safety instruction can lead
to serious injury or even death.
WARNING
Operation manual B30i
3
Notes on the products
Read manual
before use!
Before using the device, carefully read the operating manual and keep it with the B30i loudspe-
aker.
General information
Operation manual: OM-B30i
Version 1.0 en, 04/2019
© by TW AUDiO 2019; all rights reserved.
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAUDiO.
TW AUDiO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TW AUDiO reserves the right to update this document based on recent developments.
TW AUDiO GmbH
Osterholzallee 140
71636 Ludwigsburg
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
This symbol in combination with the signal word “Tip” identifies additional information or
notes that will simplify working with TWAUDiO products on the basis of practical experience.
TIP
Operation manual B30i
4
Content
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical specifications .................................................................................................. 8
3.1 Data sheet............................................................................................................... 8
3.2 Connection diagram ................................................................................................ 8
4. Commissioning............................................................................................................... 9
4.1 Setup ...................................................................................................................... 9
4.2 M10 threaded inserts............................................................................................... 9
4.3 Connection options ............................................................................................... 10
4.4 Operation .............................................................................................................. 11
4.5 Connecting the cable............................................................................................. 12
5. Transport and Storage.................................................................................................. 13
6. CE Conformity Declaration............................................................................................ 14
7. Disposal ....................................................................................................................... 15
Operation manual B30i
5
1. Safety | Intended use
Please adhere to the following safety instructions to avoid risks when operating loudspeakers.
The B30i loudspeaker was developed for use in professional sound systems. The loudspea-
ker may only be used by trained and qualified personnel.
Note the operating modes described in this operating manual. Other uses are not permis-
sible.
Damage caused by improper use is not covered by TW AUDiO.
Loudspeakers generate an electromagnetic field. Persons with pacemakers are not permit-
ted to remain in the immediate vicinity of loudspeakers as the electromagnetic fields can
cause pacemakers to malfunction.
When working with heavy loads exceeding 20 kg (44 lbs.), use suitable aids (dollies, hoisting
slings, etc.). Multiple persons may be required depending on the situation.
Ensure that the units are in a stable position and are firmly attached. A falling loudspeaker can
result in serious personal injury and property damage.
When using and assembling TW AUDiO loudspeakers, only use materials specified by
TW AUDiO. These tasks must be performed by qualified personnel. Adhere to the applicable
safety regulations.
WARNING
When setting up loudspeakers, ensure that they are not exposed to the following ambient
conditions:
• Direct sunlight
• Humidity
• Jolting
• Dust
Keep away from the immediate vicinity of loudspeakers that are operated at high sound pres-
sure levels. These loudspeaker systems are capable of endangering your health. Sound levels
beginning as low as approximately 90dBSPL can lead to long-term hearing impairment.
WARNING
Avoid:
• Feedback
• Distorted signals (clipping) and
• Peaks resulting from switching on devices, plugging in devices or unplugging devices during
operation.
Such signals can lead to loudspeaker overload and ultimately to loudspeaker failure.
WARNING
NOTE
NOTE
Operation manual B30i
6
Ensure that the loudspeaker is not exposed to permanent thermal overloads. Thermal over-
loads may cause a fire and result in serious personal injury and property damage.
WARNING
Note that TW AUDiO does not provide a warranty for damage that can be attributed to this
type of overload and therefore cannot be held liable for any secondary damage.
A permanent magnetic field is present in the immediate vicinity of loudspeakers. Ensure that
objects which react sensitively to magnetic fields are not located in the immediate vicinity of
the loudspeaker. In particular, this applies to magnetic storage media, magnetic stripe cards
such as debit cards and CRT displays. A distance of approximately one meter is sufficient to
avoid damage.
Check loudspeakers and accessory parts regularly for visible wear. This is essential to ensure
continuing fault-free operation. Worn parts should be replaced immediately. Spare parts are
available from TWAUDiO.
NOTE
NOTE
Operation manual B30i
7
2. Overview
2.1 Components
1. Front grill
2. 15 mm Multiplex enclosure - Warnex textured paint surface
3. M10 threaded insert for attaching accessories (8 pieces)
4. 15“ cone driver
5. Type label
6. Standard i-series screw terminal
Figure 2.1 - Overview
123
5 6
4
Operation manual B30i
8
3. Technical specifications
3.1 Data sheet
Drivers 2x 15“ LF
Frequency response 35 - 200 Hz
Power handling (program/Peak) 2000 / 4000 W
Impedance 8 Ω
Max. SPL / 1m 133 dB
Dimensions (h x w x d) 700 x 440 x 800 mm [27,6 x 17,3 x 30,5 in]
Weight 36,3 kg [80 lbs]
Surface Warnex textured paint
3.2 Connection diagram
Figure 3.2 - Connection diagram
Weiß
Blau
WARNUNG
LF 15“
LF 15“
POL.REV.
Operation manual B30i
9
4.1 Setup
The B30i loudspeaker is designed for horizontal and vertikal, standing or hanging operation.
TW AUDiO provides a wide range of accessories to securely attach the loudspeaker.
TW AUDiO recommends using only the accessories specified by TWAUDiO for securing and
mounting loudspeakers.
NOTE
Make sure the speakers are securely fastened to prevent personal injury and property damage.
WARNING
4. Commissioning
Make sure that all system structures are located on a firm, level surface and that the surface
can bear the total weight!
WARNING
4.2 M10 threaded inserts
Before fitting the accessories follow the subsequent steps:
4. For the B30i loudspeaker M10 threaded insert, various TW AUDiO accessories can be
mounted. For each product refer to the instructions.
5. Note that the load capacity is limited to a single speaker.
3. Please note that once the countersunk screws are removed, water and moisture may
enter into the enclosure.
1. To remove the countersunk screws remove the texture paint by using a cutter knife. Avoid
damaging the surrounding paint to prevent chipping.
2. Remove for your application required countersunk screws. Use a hexalobular key with the
size of TX50.
NOTE
WARNING
Operation manual B30i
10
4.3 Connection options
The B30i loudspeaker is equipped as standard with the i-series screw terminal.
As options there can be mounted a panel with cable gland (CG-option) or a panel with two
built-in speakON® jacks (SO-option).
Furthermore, a blind cover option is available.
All connection options are only available in black colour.
NOTE
More information about the different connection options can be found in the respective opera-
ting instructions in the download area on the homepage of TWAUDiO.
NOTE
Table of contents
Other TW Audio Speakers manuals
TW Audio
TW Audio BAT24 User manual
TW Audio
TW Audio URA30i User manual
TW Audio
TW Audio MCT24 User manual
TW Audio
TW Audio T24 Quick start guide
TW Audio
TW Audio M10 User manual
TW Audio
TW Audio C12 User manual
TW Audio
TW Audio ARBT24 User manual
TW Audio
TW Audio M8i User manual
TW Audio
TW Audio T24N User manual
TW Audio
TW Audio ELLA6 User manual
TW Audio
TW Audio M8 User manual
TW Audio
TW Audio M12i User manual
TW Audio
TW Audio M10 User manual
TW Audio
TW Audio T20 User manual
TW Audio
TW Audio VERA20i User manual
TW Audio
TW Audio VERA36 Series User manual
TW Audio
TW Audio B15 User manual
TW Audio
TW Audio T24N Quick start guide
TW Audio
TW Audio FDBSX User manual
TW Audio
TW Audio B17i User manual
