TSI Instruments VelociCalc 9555 Assembly instructions

135 Bernice Drive, Bensenville IL 60106-3366

Toll Free (866)736-8347 Phone (815)464-6200

Fax (815)464-8720

www.raecorents.com

Nationwide rental of industrial hygiene and safety instrumentation, from a service that treats you right.

©2014 RAECO Rents LLC, Bensenville IL. All rights reserved.

TSI VelociCalc 9555/9565 Quick Tips for Pressure Testing

For complete documentation, see http://mobibrix.com/0DKVGG

1. Probe Sampling

a. Connect probe to bottom of instrument, and turn

the instrument on

b. To change the readings displayed on screen...

1. Select [Menu] softkey

2. Select Display Setup

3. Use the softkeys to select display values

(Primary sets value to a larger font to make it

more visible to the user)

a. 964 probe – Flow, Temperature, and %rH set to ON

b. 982 Probe – CO, CO2, Temperature and %rh set to ON

c. 985 Probe – VOC and Temperature set to ON

d. 995 Probe – Flow and Temperature set to ON

4. Press [Enter] to save changes.

c. Set up data logging values

1. Select [Menu] softkey

2. Select Data Logging

3. Select Measurements

4. Select values to be logged by instrument

a. ON = Measurement is logged to memory

b. Display = Measurement will be logged if it is displayed on the main screen

c. OFF = Unit will not save data for that value

d. Hold probe to take samples

e. [NEXT TEST] key saves data up to the point it is pressed and begins a new session

135 Bernice Drive, Bensenville IL 60106-3366

Toll Free (866)736-8347 Phone (815)464-6200

Fax (815)464-8720

www.raecorents.com

Nationwide rental of industrial hygiene and safety instrumentation, from a service that treats you right.

©2014 RAECO Rents LLC, Bensenville IL. All rights reserved.

2. Differential Pressure Testing

a. Connect the two lengths of neoprene tubing to the positive and

negative ports at the top of the instrument

b. Place the free end of the positive port tubing in the area being

tested

c. Place the free end of the negative port tubing in the control/ambient zone

1. A positive reading means the variable/sample (+)zone is higher pressure than the

control/ambient (-)

2. A negative reading means the control/ambient zone (-) is higher pressure than the

variable/sample (+)zone

3. Static Pressure Testing

a. Connect one length of neoprene tubing to the positive port at the top of the instrument

b. Keep the negative (-) port open to measure ambient conditions

c. Attach the static pressure tip to the tubing on the positive (+)port

d. Point the static pressure tip directly into airflow to get an accurate reading

1. Positive reading means the pressure in the duct is higher than the measured ambient

conditions

2. Negative reading means the pressure in the duct is lower than the measured ambient

conditions

For complete documentation, see http://mobibrix.com/0DKVGG

This manual suits for next models

1

Table of contents

Other TSI Instruments Measuring Instrument manuals

TSI Instruments

TSI Instruments DP-CALC 5825-AC Operation manual

TSI Instruments

TSI Instruments HM685 User manual

TSI Instruments

TSI Instruments Alnor Airflow AXD610 Operation manual

TSI Instruments

TSI Instruments ALNOR RVA501 Operation manual

TSI Instruments

TSI Instruments VelociCalc Plus 8384 Operation manual

TSI Instruments

TSI Instruments 9600 Series Operation manual

TSI Instruments

TSI Instruments 4043 Operation manual

TSI Instruments

TSI Instruments dusttrak II 8530 Operation manual

TSI Instruments

TSI Instruments ALNOR HM670 User manual

TSI Instruments

TSI Instruments QUESTemp 32 User manual

TSI Instruments

TSI Instruments VELOCICALC 9565 Series Operation manual

TSI Instruments

TSI Instruments PORTACOUNT 8020 Installation and operating instructions

TSI Instruments

TSI Instruments VelociCalc 9545 Operation manual

TSI Instruments

TSI Instruments 5200 Series User manual

TSI Instruments

TSI Instruments 3321 Operation manual

TSI Instruments

TSI Instruments 3302A User manual

TSI Instruments

TSI Instruments HM675 User manual

TSI Instruments

TSI Instruments SidePak AM520 User manual

TSI Instruments

TSI Instruments DustTrak DRX User manual

TSI Instruments

TSI Instruments 8495 Operation manual

TSI Instruments

TSI Instruments Alnor Model AXD620 Operation manual

TSI Instruments

TSI Instruments VELOCICALC 9565-P-AC Operation manual

TSI Instruments

TSI Instruments Alnor RVA801 Operation manual

TSI Instruments

TSI Instruments 3936 Operation manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual