02
TIP | TIM SERIES
Multi-Function Paddle Wheel Flow Meter
Operating Voltage 10 -30VDC
Current Consumption 60mA max.
Control Output NPN | 150mA max.
Transmitter 4-20mA
Communication RS485*
Flow Rate GPM | LPM 0.0 -999.9
Fluid H2O | Liquid Chemicals
Accuracy ± 0.5% of F.S. @ 25°C
Response Frequency 5K Hz
Max Flow Rate 10m/s | 33ft/s
Min Flow Rate 0.1m/s | 0.3ft/s
Materials of Constrction Paddle | Tefzel®
Rotor | Busings | Zirconium Ceramic
Sensor Body | PVC | PP | PVDF
O-Ring Material Viton (std) | EPDM*
Operating Temperature PVC < 60°C | PP < 80°C | PF < 100°C
Protection Class IP-65 | General Purpose
Approval CE | RoHS
*Optional
General Data
Specification Description
1. De-pressurize and Vent System Prior to Installation or Removal.
2. Confirm Chemical Compatibility Before Use.
3. DO NOT Exceed Maximum Temperature or Pressure Specifications.
4. ALWAYS Wear Safety Goggles or Face-Shield During Installation and/or Service.
5. DO NOTAlter Product Construction.
Safety Information
WARNING!
Indicates a potential hazard. Failure to follow all
warnings may lead to equipment damage, injury, or
death
Warning | Caution | Danger
Overtightening may permanently damage product
threads and lead to failure of the retaining nut.
Hand Tighten Only
Use of tool(s) may damage product beyond repair
and potentially void product warranty.
Do Not Use Tools
Always utilize the most appropriate PPE during
installation and service of Truflo products.
Personal Protective Equipment (PPE)
Sensor may be under pressure, take caution to vent
system prior to installation or removal. Failure to do so
may result in equipment damage and/or serious injury.
Pressurized System Warning
Highlights additional information or detailed
procedure.
Note | Technical Notes
