Triacta PowerHawk 6320 User manual

PowerHawk 6320

High Density Meter

Installation Guide

Triacta Power Technologies, and the Tricata logo are trademarks of Triacta

Power Technologies Inc.

All other trademarks that may be used in this document are the property of

their respective holders.

Triacta assumes no responsibility for the accuracy of the information

presented, which is subject to change without notice.

Disclaimers

This document contains confidential information which is proprietary to

Triacta Power Technologies Inc. Copying and/or distribution of this

material is prohibited without the prior approval of authorized Triacta

personnel.

Triacta products are intended for commercial uses. The customer hereby

agrees that the use, sale, licence or other distribution of the products for any

such application without the prior written consent of Triacta, shall be at the

customer's sole risk. The customer hereby agrees to defend and hold

Triacta harmless from any claims for loss, cost, damage, expense or

liability that may arise out of or in connection with the use, sale, licence or

other distribution of the products in such applications.

The warranties provided for Triacta products, if any, are set forth in

contractual documentation entered into by Triacta and its customers.

This document was originally written in English. If there is any conflict or

inconsistency between the English version and any other version of a

document, the English version shall prevail.

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

Table of Contents i

Table of Contents

PowerHawk 6320 Meter Installation Guide

System description.......................................................................... 1

PowerHawk 6320 system specifications .............................................................................. 1

Front panel display ......................................................................................................... 1

Installation

Pre-installation................................................................................. 4

Pre-installation check list ...................................................................................................... 4

Site planning ......................................................................................................................... 5

Access to power and lighting ......................................................................................... 5

Installation procedures ................................................................... 6

Mounting the PowerHawk .............................................................................................. 6

Installing voltage transformers for three-phase service greater than 120V ................... 6

Installing the reference voltage cable and power cable in a 120/240V application ........ 8

Using the auxiliary power input .................................................................................... 11

Installing the current transformers ............................................................................... 12

Using 5A CT converters with the PowerHawk 6320 meter .......................................... 15

Connecting the phone line ........................................................................................... 16

Connecting the Ethernet cable ..................................................................................... 16

Connecting pulse inputs ............................................................................................... 16

Start-up sequence for the PowerHawk 6320 meter ........................................................... 17

The initial report ........................................................................................................... 17

Display navigation .............................................................................................................. 18

Normal mode ............................................................................................................... 18

Diagnostics mode ........................................................................................................ 18

Recording the meter map ................................................................................................... 20

Regulatory Compliance

CSA .............................................................................................................................. 22

Federal Communications Commission (FCC) statement ............................................. 22

Industry Canada Class A emission compliance statement .......................................... 22

Avis de conformité aux normes d'Industrie Canada ..................................................... 23

Safety requirements and certification ................................................................................. 23

Access to equipment .................................................................................................... 23

Servicing the equipment .............................................................................................. 23

Equipment servicing ..................................................................................................... 23

Electrical safety compliance ............................................................................................... 23

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

ii Table of Contents

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

PowerHawk 6320 Meter Installation Guide 1

PowerHawk 6320 Meter Installation Guide

This document provides general information about the PowerHawk 6320 high-density meter,

and procedures to install and start up the unit, and complete the initial configuration.

• “System description” on page 1

• “Pre-installation” on page 4

• “Installation procedures” on page 6

• “Start-up sequence for the PowerHawk 6320 meter” on page 17

• “Regulatory Compliance” on page 22

Thisdocumentationisintendedfor thoseresponsible forinstallingandconfiguring PowerHawk

meters.

Installers must be licensed electricians with knowledge of local and national safety regulations.

System description

The PowerHawk 6320 high-density meter is single-phase, poly-phase, and three-phase devices

with 20 individual meters. All PowerHawk units are designed for residential, commercial and

industrial use with a wye service. They display the power and consumption readings for each

measurement point.

PowerHawk 6320 system specifications

The PowerHawk system architecture includes:

• single-phase, poly-phase (network) and three-phase compatiblity

• 120/240V and 120/208V configurations

• 20 individual meter points

• local Ethernet configuration interface via PC and web browser

• onboard modem and Ethernet ports for remote reporting

Front panel display

As shown in Figure 1, the PowerHawk 6320 has the following front panel features:

•LCD - displays 2 rows of 16 characters for each of the 20 meters

•Display button - cycles through the available information for each of the 20 meters

•Left and right arrow buttons - selects which of the 20 meters is on the display

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

2PowerHawk 6320 Meter Installation Guide

Figure 1: PowerHawk front panel

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

PowerHawk 6320 Meter Installation Guide 3

Table 1 lists the system specifications of the PowerHawk 6320 high-density meter.

Table 1: PowerHawk 6320 specifications

Specification Description

Dimensions Height: 16 in. (40.6 cm)

Width: 10 in. (20.3 cm)

Depth: 2 in. (5.1 cm)

Weight 5.5 lb (2.5 kg)

Reference input voltage 120/208V, 3W+N+PE

120/208V, 2W+N+PE

120/240V, 2W+N+PE

Voltage tolerance 108V to 127V

Maximum current 125 mA, 60 Hz

Current probes 200 A, 400 A, 800 A

Measurement accuracy Measurement Canada Approved

Pulse input Dry form A and solid-state form A compatible

Internal 3.3V pull-up

Maximum frequency 10 Hz

Minimum pulse width 20 ms

NVM storage 120 days in 15-minute intervals

Onboard modem V.90

Onboard Ethernet port 10 Mb/s

Fuse rating F1, F2, F3: T80 mA or T100 mA, 250V

F4: T80 mA or T125 mA, 250V

Operating temperature 32oF to 122oF (0 to 50oC)

Operating humidity 0 to 90% non-condensing

Usage environment For indoor use only

Maximum altitude 6562 ft. (2000 m)

Pollution degree 2

Installation Category II

Measurement Category III

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

4Installation

Installation

This section provides pre-installation, installation and system start-up procedures as follows:

• “Pre-installation” on page 4

• “Installation procedures” on page 6

• “Start-up sequence for the PowerHawk 6320 meter” on page 17

Pre-installation

This section provides information about activities that must be performed before installing the

equipment at the site. The following topics are covered:

• “Pre-installation check list” on page 4

• “Site planning” on page 5

Pre-installation check list

The following Triacta Power equipment is required for each installation:

• PowerHawk 6320 high-density meters

• two 25-pair CT cables per PowerHawk meter with amphenol connectors, available in

lengths of 13 ft. (4 m) or 26 ft. (8 m)

• serialized current transformers for metering

Note: The current transformers supplied by Triacta are certified, and comply with national

electrical codes.

When you receive your order, verify that the items listed above are included with the shipment,

and visually inspect them for damage. If any parts are missing or damaged, contact your Triacta

representative.

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

Installation 5

The installer must provide the following tools and equipment before proceeding with the

installation:

• an appropriate breaker for the type of panel: single-, poly-, or three-phase depending on

the installation, or a fused disconnect switch

• current/voltage meter to test the phasing of panels

• phone or butt set to test the phone line

• RJ11 junction box

• RJ11 splitter to tap into the existing junction box

• RJ11 patch cable

• xDSL filter if required (many businesses have their internet access on the same line as the

fax)

• RJ45 Ethernet patch cable

• 4-wire 14 AWG (1.63 mm2) cable for three-phase PowerHawk installation

• 3-wire 14 AWG (1.63 mm2) cable for single-phase or poly-phase PowerHawk installation

• small flat-head screwdriver

• crimping tool

• 22 AWG to 18 AWG crimps

• wire strippers

• four 1-inch (25-mm) #8 mounting screws suitable for the selected mounting surface

Site planning

1. Determine the number of PowerHawk units to be installed and ensure there is adequate

space.

2. Determine the number of analog phone lines or ethernet drops required, and ensure they

are installed before installing the PowerHawk unit.

3. Determine the number and types of meters or monitors required (single-phase, poly-phase,

or three-phase).

Access to power and lighting

The installation site must be supplied with access to the main electrical panel and any

sub-panels. Portable or permanent lighting must be available to provide the installers with a

clear view of the equipment and of the installation environment. Each installation may vary

depending on physical site restrictions.

NOT FOR DISTRIBUTION WITHOUT THE CONSENT OF TRIACTA POWER

Triacta Power Technologies PowerHawk 6320

6Installation

Installation procedures

This section provides information about activities that must be performed to install the

PowerHawk in a single-phase, poly-phase, or three-phase application (120/208V or 120/240V).

The installation procedures must be performed in the order listed in Table 2 to ensure safety and

proper functioning of the equipment.

WARNING: If the equipment is installed or used in a manner not specified in this

document, the protection of the equipment may be impaired.

Table 2: Installation procedures

Mounting the PowerHawk

The PowerHawk is mounted adjacent to the main breaker box. The unit can be mounted either

horizontally or vertically, depending on the preferred routing of the wiring. It should be securely

mounted with four 1-inch (25 mm) #8 mounting screws suitable for the selected mounting

surface. If mounting the unit on a gyprock surface, also use cylinder plugs.

1. Remove the front cover from the PowerHawk by removing the four screws with a Phillips

screwdriver. Keep the cover and screws in a safe place for re-installing.

2. Mount the PowerHawk on the wall and secure it by inserting a screw in each mounting

keyhole and tightening the screws.

Installing voltage transformers for three-phase service greater than 120V

Voltage transformers are required when monitoring services greater than 120V. Measurement

Canada approved VTs to reduce theline-to-neutral voltage of the serviceto120V. The accuracy

class should be 0.3% or better, with a burden rating of 150VA.

Installation type Installation procedure and page reference

208V/240V installation “Installing the reference voltage cable and power cable in a 120/240V

application” on page 8

“Using the auxiliary power input” on page 11

“Installing the current transformers” on page 12

“Using 5A CT converters with the PowerHawk 6320 meter” on page 15

“Connecting the phone line” on page 16

“Connecting pulse inputs” on page 16

“Connecting the Ethernet cable” on page 16

“Start-up sequence for the PowerHawk 6320 meter” on page 17

“The initial report” on page 17

“Recording the meter map” on page 20

Table of contents

Other Triacta Measuring Instrument manuals

Triacta

Triacta Gateway User manual

Triacta

Triacta GATEWAY-S User manual

Triacta

Triacta Gateway User manual

Triacta

Triacta PowerHawk 6212 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual