10/20
3. SAFETY INSTRUCTIONS
3.1. Safety instructions for operating the product
• Inspect before every use. Examine the support blocks for cracks or damage before
each use. Do not use if even a minor crack, bend or other damage/deformation is
found. Discard the support blocks if damaged or deformed.
• The person responsible for the use of the product must make sure that all of the
safety rules in force in the country of its use are applied, to guarantee that the
equipment is used in conformity with the use for which it is destined and to avoid
any dangerous situation for the user.
• Do not operate the product unless you are of age.
• TVH Parts Holding NV cannot envisage each possible circumstance that may
result in danger. Therefore, the warnings given in this publication and those on the
equipment are not exhaustive.
• In the event that equipment, procedures, work methods or working techniques are
used that are not specifically advised by the TVH Parts Holding NV company, it is
necessary to make sure that there is no danger to the operator or other people.
• Study, understand and follow all instructions before operating this equipment.
• Do not exceed the rated capacity, be aware of dynamic loading.
• Use only on hard, level surfaces.
• Centre the load.
• Ensure that the support blocks are in correct position in relation to the vehicle.
• This means that the support blocks should be placed as wide apart as possible to
maximise their load capacity.
• In the event of unsafe use, limbs or persons can get stuck between the vehicle and
the support blocks.
• No alterations shall be made to this product.
• Use wheel chocks or other blocking devices on opposing wheels before using the
support blocks.
• Do not move the vehicle while it’s on support blocks.
• The user and/or other persons who come into contact with the support blocks or
the vehicle must wear safety gloves and safety shoes at all times.
• Others who are not working on the vehicle must keep a minimum distance of 0.5m
from the vehicle.
