Toshiba TE Series User manual

DOCUMENT: NBZ0003

INSTRUCTION MANUAL

INSTALLATION – OPERATION - MAINTENANCE

TE Series

Low Voltage

Digital

Solid State Soft Starter

18 – 1250A

Issued: 9/12

Firmware Version 4.31

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Important Notice

The instructions contained in this manual are not intended to cover all details or variations in equipment

types nor may it provide for every possible contingency concerning the installation, operations, or

maintenance of this equipment. Should additional information be required, contact your Toshiba

Customer Support Center.

The contents of this manual shall not become a part of or modify any prior or existing agreement,

commitment, or relationship. The sales contract contains the entire obligation of Toshiba International

Corporation. The warranty contained in the contract between the parties is the sole warranty of Toshiba

International Corporation and any statements contained herein do not create new warranties or modify

the existing warranty.

Any electrical or mechanical modifications to this equipment without the prior written consent of

Toshiba International Corporation may void all warranties or other safety certifications.

Unauthorized modifications may also result in safety hazard or equipment damage.

Misuse of this equipment could result in injury and equipment damage. In no event will Toshiba

International Corporation be responsible or liable for direct, indirect, special, or consequential

damage or injury that may result from the misuse of this equipment.

About This Manual

Every effort has been made to provide accurate and concise information to you, our customer.

At Toshiba International Corporation we are continuously striving for better ways to meet the constantly

changing needs of our customers. E-mail your comments, questions, or concerns about this

publication to Toshiba.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Purpose and Scope of Manual

This manual provides information on how to safely install, operate, maintain, and dispose of your TE

solid state starter. The information provided in this manual is applicable to the TE starter only.

This manual provides information on the various features and functions of this powerful device,

including:

• Installation

• Operation

• Mechanical and electrical specifications.

Included is a section on general safety instructions that describe the warning labels and symbols that

are used on the device and throughout the manual. Read the manual completely before installing,

operating, performing maintenance, or disposing of this equipment.

This manual and the accompanying drawings should be considered a permanent part of the equipment

and should be readily available for reference and review. Dimensions shown in the manual are in

imperial units and/or the metric equivalent. Connection drawings within this document convey the typical

topology of the TE starter.

Because of our commitment to continuous improvement, Toshiba International Corporation reserves the

right, without prior notice, to update information, make product changes, or to discontinue any product or

service identified in this publication.

Toshiba International Corporation (TIC) shall not be liable for direct, indirect, special, or

consequential damages resulting from the use of the information contained within this manual.

This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form

without the prior written consent of Toshiba International Corporation.

TOSHIBA® is a registered trademark of Toshiba Corporation. All other product or trade references

appearing in this manual are registered trademarks of their respective owners.

Printed in the U.S.A.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Contacting TIC’s Customer Support Center

Toshiba International Corporation’s Customer Support Center can be contacted to obtain help in

resolving any system problem that you may experience or to provide application information.

The Support Center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Center’s toll free

number is US (800) 231-1412/Fax (713) 937-9349 CAN (800) 872-2192 MEX 01 (800) 527-1204.

For after-hours support follow the directions of the outgoing message when calling.

You may also contact Toshiba International Corporation by writing to:

Toshiba International Corporation

13131 West Little York Road

Houston, Texas 77041-9990

For further information on Toshiba International Corporation’s products and services, please visit

our website.

TOSHIBA INTERNATIONAL CORPORATION

TE Solid State Starter

Complete the following information and retain for your records.

Model Number: _____________________________________________________________________

Serial Number: _____________________________________________________________________

Project Number (if applicable):_________________________________________________________

Date of Installation: _________________________________________________________________

Inspected By: _____________________________________________________________________

Name of Application: ________________________________________________________________

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

General Safety Information

DO NOT attempt to install, operate, maintain, or dispose of this equipment until you have read and

understood all of the product safety information and directions that are contained in this manual.

Safety Alert Symbol

The Safety Alert Symbol is comprised of an equilateral triangle enclosing an exclamation mark. This

indicates that a potential personal injury hazard exists.

Signal Words

Listed below are the signal words that are used throughout this manual followed by their descriptions

and associated symbols. When the words DANGER, WARNING, and CAUTION are used in this

manual, they will be followed by important safety information that must be carefully followed.

The word DANGER preceded by the safety alert symbol indicates that an imminently hazardous

situation exists that, if not avoided or if instructions are not followed precisely, will result in serious injury

to personnel or loss of life.

The word WARNING preceded by the safety alert symbol indicates that a potentially hazardous

situation exists that, if not avoided or if instructions are not followed precisely, could result in serious

injury to personnel or loss of life.

The word CAUTION proceeded by the safety alert symbol indicates that a potentially hazardous

situation exists that, if not avoided or if instructions are not followed precisely, may result in minor or

moderate injury.

The word NOTE provides helpful information.

NOTE

DANGER

WARNING

CAUTION

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Equipment Warning Labels

DO NOT attempt to install, operate, perform maintenance, or dispose of this equipment, until you have

read and understood all of the product labels, and user directions, that are contained in this manual.

Warning labels that are attached to the equipment will include the exclamation mark within a triangle.

DO NOT remove or cover any of these labels. If the labels are damaged or if additional labels are

required, contact the Toshiba Customer Support Center.

Labels attached to the equipment are there to provide useful information or to indicate an imminently

hazardous situation that may result in serious injury, severe property and equipment damage, or loss of

life if safe procedures or methods are not followed as outlined in this manual.

Qualified Personnel

Installation, operation, and maintenance shall be performed by Qualified Personnel ONLY. A

Qualified Person is one that has the skills and knowledge relating to the construction, installation,

operation, and maintenance of the electrical equipment and has received safety training on the hazards

involved (Refer to the latest edition of NFPA 70E for additional safety requirements).

Qualified Personnel shall:

• Have carefully read the entire manual.

• Be familiar with the construction and function of the starter, the equipment being driven, and the

hazards involved.

• Be able to recognize and properly address hazards associated with the application of motor-driven

equipment.

• Be trained and authorized to safely energize, de-energize, ground, lock-out/tag-out circuits and

equipment, and clear faults in accordance with established safety practices.

• Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves,

hard hats, safety glasses, face shields, flash clothing, etc., in accordance with established safety

practices.

For further information on workplace safety, visit www.osha.gov.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Equipment Inspection

• Upon receipt of the equipment, inspect the packaging and equipment for shipping damage.

• Carefully unpack the equipment and check for parts that may have been damaged during shipping,

missing parts, or concealed damage. If any discrepancies are discovered, it should be noted with the

carrier prior to accepting the shipment, if possible. File a claim with the carrier if necessary and

immediately notify your Toshiba Customer Support Center.

• DO NOT install the starter if it is damaged or if it is missing any component(s).

• Ensure that the rated capacity and the model number specified on the nameplate conform to the order

specifications.

• Modification of this equipment is dangerous and is to be performed by factory trained personnel

ONLY. When modifications are required contact your Toshiba Customer Support Center.

• Inspections may be required after moving the equipment.

• Contact your Toshiba Customer Support Center to report discrepancies or for assistance if required.

Handling and Storage

• Use proper lifting techniques when moving the breaker; including properly sizing up the load, getting

assistance, and using a forklift if required.

• Store in a well-ventilated location and preferably in the original packaging if the equipment will not be

used upon receipt.

• Store in a cool, clean, and dry location. Avoid storage locations with extreme temperatures, rapid

temperature changes, high humidity, moisture, dust, corrosive gases, or metal particles.

• The storage temperature range of the breaker is 23° to 104° F (-5° to 40° C).

• DO NOT store the unit in places that are exposed to outside weather conditions (e.g., wind, rain,

snow).

• Store in an upright position.

Disposal

Never dispose of electrical components via incineration. Contact your state environmental agency for details on

disposal of electrical components and packaging in your area.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

Table of Contents

Page

Chapter 1: Introduction 1.1 General Description …………………… 1

1.2 Sizes and Ratings ……………………… 4

Chapter 2 - Installation 2.1 Receiving and Unpacking …………….. 5

2.2 Choosing a Location …………………... 5

2.3 Initial Unit Inspection …………………... 5

2.4 SERVICE WARNING! …………………. 6

2.5 Mounting and Cleaning ……………….. 6

2.6 Power Terminations …………………… 7

2.7 Remote Keypad Mounting 9

2.8 Dimensions ……………………………... 10

Chapter 3 - Motor Overload Protection 3.1 Solid State Overload Protection ……… 11

3.2 NEMA Class Trip Curves ……………... 13

Chapter 4 – Connections 4.1 Power Connections ……………………. 15

4.2 Control Connections …………………… 16

Chapter 5 – Programming 5.1 Introduction ……………………………... 23

5.2 Digital Interface ………………………… 23

5.3 Display Modes …………………………. 24

5.4 Program Mode …………………………. 25

5.4.5 Fault Mode ………………………… 28

5.5 The TE Function List ………………... 30

5.6 Function Descriptions …………………. 36

5.6.1 Motor and Overload Functions …. 36

5.6.2 Starting Mode ……………………. 38

5.6.3/4 Jog Mode / Kick Start Mode ……. 42

5.6.5 Pump-Flex Decel Mode ………… 43

5.6.6 Restart Delay ……………………. 44

5.6.7 Current and Ground Fault Protection 45

5.6.8 Lockouts, Reset & Internal Protection 47

5.6.9 Output Relays ……………………. 54

5.6.10 Communications …………………. 55

5.6.11 System Settings …………………. 56

5.6.12 Fault History and Statistical Data 58

Chapter 6 - Start-up 6.1 Basic Startup ……………………………. 60

6.2 Start-up Check List …………………….. 61

6.3 Sequence of Operation ………………... 61

6.4 Testing with a smaller motor ………….. 62

Chapter 7 - Fault Conditions 7.1 Fault Codes and Numbers ……………... 63

7.1 Fault Explanation ……………................. 64

Appendices

Appendix 1: Ramp Profile Details ……………………………………………………………………………………….. 65

Appendix 2: Pump-FlexDecel Mode Application Considerations …………………………………………………… 68

Appendix 3: Parameter Lock / User Password Instructions ………………………………………………………….. 71

Appendix 4: External Over Load Relay Application……………………………………………................................. 73

Appendix 5: Soft Starter Settings Record ………………………….…………….…………………………………….. 78

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Basi

nsta

on and Operat

on G

de T

Ser

es D

olid

tate

tarters 1

–

1250A

1 | Page

Chapter 1 - Introduction

1.1 General Description

The TE Series is a digitally programmable solid-state reduced voltage

soft starter. Its six SCR design features a voltage/current ramp with an

anti-oscillation circuit for smooth load acceleration. The SCRs are sized

to withstand starting currents of 500% for 60 seconds. The TE Series

features smooth, step-less ramp control, which reduces motor inrush

current and excessive wear on the mechanical drive train components.

The TE Series includes a programmable keypad for setting operating

parameters for the ideal starting cycle and protection features, plus easy

to understand diagnostic LEDs. Starting torque, ramp time, current limit,

dual ramp, and Decel control are standard features on the TE Series. By

simply adjusting the unit’s starting torque, ramp time and current limit

functions, the starting electrical characteristics of the motor can be

matched to the mechanical characteristics of the drive train for controlled

acceleration of the load. The TE Series includes solid-state electronic

overload protection in addition to numerous other protective features. It

requires 120VAC (220VAC optional) control power and uses dry contact

inputs for Start / Stop control. Programmable auxiliary contacts and

provisions for interlocking are also included.

1.1.1 Control Features

Acceleration Adjustments

Programmable Ramp Types:

Voltage Ramp (VR) or closed loop Current Ramp (CR)

Starting Torque: 0 - 100% of line voltage (VR)

or 0 - 600% of motor FLA (CR)

Ramp Time: 1 to 120 seconds

Current Limit: 200 - 600% (VR or CR)

Dual Ramp Settings

4 Options:

Ramps 1 & 2 = VR,

Ramp 1 = VR, Ramp 2 = CR,

Ramps 1 & 2 = CR;

Ramp 1 = CR, Ramp 2 = VR

Dual Ramp Control:

Ramp #1 = Default,

Ramp #2 = Selectable via dry contact input

Deceleration Adjustments

Begin Decel Level: 0 - 100% of line voltage

Stop Level: 0 to 1% less than Begin Decel Level

Decel Time: 1 - 60 seconds

Programmable to Decel or coast to stop upon overload trip

Jog Settings

Jog function selected via dry contact closure input.

Jog Voltage: 5 - 100%

Time of Jog Voltage: 1 - 20 seconds

Jog Current: 100 - 500%

Kick Start Settings Kick Voltage: 10 - 100%

Kick Time: 0.1 - 2 seconds

Real Time Clock (RTC)

Controller

24/7 Time Clock Controller

Range: 1-24 hours, and 1- 7 days per week,

1 - 7 start events per day, works with Process Timer for run time

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

This manual suits for next models

Table of contents

Other Toshiba Controllers manuals

Toshiba

Toshiba TCB-TSC640-PY User manual

Toshiba

Toshiba TE2 Series User manual

Toshiba

Toshiba TSL3000 User manual

Toshiba

Toshiba TS3000 Series User manual

Toshiba

Toshiba TS3000 Series User manual

Toshiba

Toshiba RBC-AWSU52-UL User manual

Toshiba

Toshiba TS1000 Installation and operation manual

Toshiba

Toshiba BMS-IFBN1281U-E User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba TS3000 Series User manual

Toshiba

Toshiba JK Series User manual

Toshiba

Toshiba TC78B002FNG User manual

Toshiba

Toshiba RBC-AWSU52-E User manual

Toshiba

Toshiba TCB-SC640U User manual

Toshiba

Toshiba TDP T3 User manual

Toshiba

Toshiba JK400 Series User manual

Toshiba

Toshiba BMS-CT2560U-E User manual

Toshiba

Toshiba DeviceNet nv Series User manual

Toshiba

Toshiba RBC-AMS51E User manual

Toshiba

Toshiba G3 Plus Pack User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba TS3000 Series User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba BMS-CT1280UL User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual