Toshiba V Series User manual

6F8C0945

      

      

Important Information

No patent liability is assumed by TOSHIBA Corporation with respect to use of information, illustrations,

circuits, equipment or examples of application in this publication.

TOSHIBA Corporation reserves the right to make changes and improvements to this publication and/or

related products at any time without notice. No obligation shall be incurred other than as noted in this

publication.

This publication is copyrighted and contains proprietary material. No part of this book may be reproduced,

stored in a retrieval system, or transmitted, in any form or by any means — electrical, mechanical,

photocopying, recording, or otherwise — without obtaining prior written permission from TOSHIBA

Corporation.

PROSEC, TOSLINE and TOSDIC are trademarks or registered trademarks of TOSHIBA Corporation.

IBM is a registered trademark of International Business Machines Corporation.

Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the

U.S.A. and other countries.

DeviceNet is a trademark of the Open DeviceNet Vender Association, Inc.

©TOSHIBA CORPORATION 2001-2010.

6F8C0945 i

Safety Precautions

This manual contains important information for the operator to operate this product safely and correctly

and avoid bodily injury and property damage.

Grasp the meanings of the following marks and their descriptions before reading this manual.

Hazard Classifications

Note: 1. Serious injury means loss of sight, injury, burns (high temperature, low temperature), electrical

shock, fracture, or intoxication which leaves aftereffects or requires hospitalization or need to

go to the hospital for a long time.

2. Injury means hurt, burn, or electrical shock which does not require hospitalization or going to

the hospital for a long time.

3. Property damage means extended breakdown of assets and materials.

Notation of Markings

Note: The description of forbiddance, mandatory, and caution marks are subject to change, depending

on the labels on the main unit.

WARNING Indicates a potentially hazardous situation which, if not avoided,

could result in serious injury or death.

CAUTION Indicates a potentially hazardous situation which, if not a avoided,

can result in minor or moderate injury, or property damage. It can

also be used to alert against unsafe practices.

Prohibited Indicates a "may not" mark.

The concrete forbiddance is indicated with a pictograph or wording.

Mandatory Indicate a mandatory action that you should never fail to do.

The concrete content is indicated inside or near the circle with a

pictograph or wording.

Caution Indicates a caution.

The concrete content is indicated inside or near the triangle.

ii TC-net 100 PCI Bus Card Support Software User’s Manual

1. Checking the Warning Labels on the Main Unit

Make sure warning markings are attached on the main unit.

If any of them are missing or the wording is illegible, contact Toshiba's Service Department.

2. Precautions on Installation

WARNING

CAUTION

Mandatory

Be sure to ground the equipment.

Operation without grounding may cause

accidental fire or shock.

Mandatory

Avoid the following locations when

installing or storaging the model 2000.

• Locations where there is dust, salinity, or ion

particles

• Locations where there are corrosive gases

(SO2, H2S) or flammable gases

• Locations where vibration or shock occurs

beyond the allowance

• Locations where there is condensation due

to sharp temperature variations

• Locations where the ambient temperature

exceeds the allowance range

• Locations where the relative humidity

exceeds the allowance range

• Locations where the equipment is exposed

to direct sunlight

• Locations where strong electric radiation or

magnetic field is generated

Do not cover the hole of the equipment, and the

ventilator/air inlet of the system.

Otherwise, overheating, etc. can cause fire

or malfunction.

Mandatory

Improper the installation or writing of the

system can cause not only insufficient

performance but also malfunction and

failure of the equipment

Forbidden

Mandatory

Install the equipment at a place where

maintenance and inspection are easy to do.

Otherwise, recovery from failure may take

much more time, leading to a serious

accidents.

6F8C0945 iii

Safety Precautions on Maintenance and inspection

WARNING

CAUTION

Turn off power removing or connecting any

modules, boards, or devices.

Otherwise, it can cause electrical shock, or

machine damage.

Turn off power removing any modules after

installing.

Otherwise, exposed conductive parts of wire

or on the rear of terminal blocks can cause

electrical shock.

Mandatory Mandatory

Place any modules or boards removed from

the unit on a conductive mat or conductive

bag (containing a spare board, etc.) on an

grounded desk.

Otherwise, static electricity can damage

components of the module.

Mandatory

Be careful not to hit or fall off the equipment

by accident.

Excess shock can cause failure.

Forbidden

Touch a grounded metal part to discharge the

static electricity on your body before touching

the equipment.

Otherwise, charged static electricity on your

body can cause malfunction or failure.

Mandatory

Do not apply benzene and thinner when

cleaning the equipment.

Otherwise, it can cause deformity or

discoloration the panel or case of the

equipment.

Forbidden

Use soft cloth to clean the equipment.

Use water-dipped and squeezed cloth to clean

it if dirty.

Leaving the equipment dirty can cause

mistaken or malfunction.

Mandatory

iv TC-net 100 PCI Bus Card Support Software User’s Manual

4. Precautions for Operation

WARNING

Safety Precautions on Maintenance and inspection

WARNING

CAUTION

Turn off power of the equipment before

replacing the power fuse or warning fuse.

Otherwise, it can cause electrical shock or fire.

Mandatory

Apply power of the specified ratings (voltage

fluctuation range, frequency, output rating,

etc.) in User's manual.

Otherwise, it can cause malfunction, machine

damage or fire due to overheat.

Mandatory Turn off power immediately if the ambient

temperature or internal temperature exceeds

beyond normal range or if failure is occurred in

the equipment.

Contact Toshiba for repairing.

Operation under such situation can cause fire

or electrical shock.

Mandatory

Do not touch any components, terminals,

connectors, or printed circuit boards in the

module.

Otherwise, it can cause the IC or LSI or the

like to be broken by static electricity, resulting

in failure or malfunction.

Also, the edge of components can cause

injury.

Forbidden Do not forcibly bend or pull or distort the power

cord and other cables. Otherwise, they can be

cut off or cause overheat.

Forbidden

6F8C0945 v

6. Safety Precautions on Disposal

WARNING

CAUTION

Do not enter wire scrapes or other foreign

debris into the equipment.

Also, do not insert metal parts into them.

They can cause fire or accidents.

Forbidden

Do not disassemble or modify the equipment.

Otherwise, it can cause malfunction or failure.

Forbidden

Do not throw lithium batteries into fire.

Otherwise, they can explode.

Forbidden

Observe local regulations for disposal of the

lithium batteries or the product (Base unit

and modules).

Mandatory

vi TC-net 100 PCI Bus Card Support Software User’s Manual

Limitation of Applications

The equipment has been designed and manufactured for use in an industrial environment.

However, the equipment is not intended to be used for systems which can endanger human life

(Note 1).

Consult Toshiba if you intend to use the equipment for a special application which involves human

life and has great influence on the maintenance of the public function (Note 2). This is why such

application requires special care on the operation, maintenance, and control of the system (Note 3).

(Note 1) The systems which can endanger human life are life maintenance systems, equipment

installed in the surgery, and other medical equipment.

(Note 2) The systems which involve human life and have great influence on the maintenance of the

public function mean the main control system of a nuclear power plant, safety and

protection system of a nuclear power facility, transport operation and control systems for

mass transportation, control systems of aviation and space systems, and other systems

and subsystems where safety is critical.

(Note 3) "Special care" means to build a safety system (foolproof design, fail safe design,

redundancy design, etc.) in full consultation with Toshiba's engineers.

Immunity

Toshiba is not liable for any loss caused by fire, earthquake, action by a third party, or other

accidents, or the operator's intentional or accidental misuse, incorrect use, or use under abnormal

condition.

Toshiba is not liable for any incidental loss caused by the use or non-use of this product, such as

loss of business profits, suspension of business, or loss or change of data on memory.

Toshiba is not liable for the loss caused by an operation contradictory to any of the instructions

stated in this manual.

Toshiba is not liable for the loss caused by an incorrect operation in combination with other

equipment.

Toshiba is not liable for the loss caused by a malfunction in combination with an application program

made by the customer.

NOTE:

Use cellular phones and PHSs at least one meter away from the working equipment,

transmission cables, and I/O bus cable. Otherwise, the system can malfunction.

6F8C0945 vii

Preface

This manual describes the software that supports data transfer over the information and

control network TC-net 100 using a PC/AT compatible computer equipped with the JTNI

series PCI bus card for the information and control network TC-net 100. This support

software can be installed on the following operating systems.

To run this software, each OS System Requirement, more than 1MB hard disk space is

required.

Caution

• By the affinity of the JTNI card and a PCI chipset, this software may not work properly.

• 64-bit OSes are not supported.

Related Documentation

• Integrated Controller Vseries model 3000 Information and Control Network Module

TC-net 100 User's Manual (6F8C0939)

• Integrated Controller Vseries Information and Control Network TC-net 100 Optical

Shared Hub Unit User's Manual (6F8C0940)

• Integrated Controller Vseries Information and Control Network TC-net 100 PCI Bus

Card JTNI Series User's Manual (6F8C0941)

Card

Operating system Support soft

product code

Support software

version

JTNI1*,

JTNI2*

JTNI3*,

JTNI4*

Yes Yes Windows Server 2008

Standard SEJTNI2A V01.40 or a later version

Yes Yes Windows Vista Business SEJTNI2A V01.30 or a later version

Yes Yes Windows Server 2003 SEJTNI2A V01.20 or a later version

Yes Yes Windows XP SEJTNI2A V01.10 or a later version

Yes Yes Windows 2000 SEJTNI2A V01.00 or a later version

Yes -Windows NT4.0 SEJTNI 3A V01.00 or a later version

viii TC-net 100 PCI Bus Card Support Software User’s Manual

Be Sure To Observe The Following

Observe the following to ensure the safety of the operator in using the equipment and to

keep it in normal operating condition.

1. Carefully read the Operation Manual before use.

2. Avoid installing or keeping the equipment at any of the places or in the environment

mentioned below.

(1) Very dusty place

(2) Place where corrosive gases (SO2, H2S, etc.) are generated

(3) Place where the product may be exposed to vibration or shock

(4) Environment of low or high temperature deviating from the conditions for instal-

lation specified herein.

(5) Very humid place

3. If the ambient temperature or the internal temperature of the equipment has arisen

too high, or if the equipment has developed a fault, stop using it, switch power off,

and contact the nearest Toshiba service station.

4. Do not open the case of the equipment while it is in operation except when setting

the switches.

5. Do not attempt to modify the equipment.

6. Take care not to drop the JTNI card during transit.

Other manuals for V Series

Table of contents

Other Toshiba Controllers manuals

Toshiba

Toshiba RBC-AIP2 User manual

Toshiba

Toshiba nv Series User manual

Toshiba

Toshiba TS1000 Installation and operation manual

Toshiba

Toshiba RBC-AMS51E User manual

Toshiba

Toshiba Programmable Controller PROSEC T3 User manual

Toshiba

Toshiba PROSEC T1-16S User manual

Toshiba

Toshiba TSL3000 User manual

Toshiba

Toshiba TDP T3 User manual

Toshiba

Toshiba 2000 User manual

Toshiba

Toshiba JK 720 User manual

Toshiba

Toshiba P9 User manual

Toshiba

Toshiba TCB-SC640U User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba JKSSS Series User manual

Toshiba

Toshiba nv Series User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba RBC-AWSU52-UL User manual

Toshiba

Toshiba BMS-CT2560U-E User manual

Toshiba

Toshiba TCB-IFCB-4E2 User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba Eagle T1 Series PLCs User manual

Toshiba

Toshiba Vm Series User manual

Toshiba

Toshiba RBC-MTSC1 User manual

Toshiba

Toshiba BMS-CT1280UL User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual