Introduction
TME’s range of unique barcode scanning thermometers use barcodes to
identify a location or product for temperature measurement; with the
MM7100-2D, you can now assign an alarm value with remedial action to
these barcodes enabling the user to be instantly alerted to any
temperature anomalies. When the barcode is scanned, the MM7100-2D
will give a visual low or high alarm with a corrective action message
which can set by the user.
Alarms can be set to reflect critical temperature points. For example, if
a barcode represents a cooked chicken, then set the low alarm value to
73°C and the high to 80°C. When the user takes the temperature and
scans the chicken, they will see an indication of whether the
temperature is in the acceptable range and the suggested corrective
action if it is not (e.g. adjust oven temperature).
The MM7100-2D can also be used for water temperature testing. For
monitoring legionella temperatures, a global alarm can be set which
gives the critical temperature range at which the legionella bacterium
multiplies. When the user scans the product barcode, the display will
give an indication of whether or not the temperature is safe.
