TKT T2000-TFC-02 User manual

Portable Oil-Water Interface Detector

and Temperature Gauging

Model T2000-TFC-02

Gas-Tight(Closed) Type

MODEL : T2000-TFC-02

zPortable – one unit used for all tanks

zEconomical and affordable

zCargo contents validation

zHigh Accuracy & Response Performance

zEasy Installation & Operation

zEasy Maintenance

zEnvironmental Pollution Prevention

zPerfect Isolation of Hazardous Gas

zDetermines Interface, Ullage and

temperature (3 – in – 1)

Benefits of T2000-TFC-02

INSTRUCTION MANUAL

for PMS (Portable Tank Measuring System)

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 2

1. Table of Contents

1. Table of Contents.

2. Useful Measuring Jobs on Deck of Tanker and Applicable Rules.

3. Type of Portable Equipment for IBC BCH CODE.

4. All Kinds of TANKTECH Portable Measuring System.

5. Installation Chart for TANKTECH Portable Measuring System.

6. Three Functions.

7. Specification for Portable Oil/Water Interface Detector.

(Model : T2000-TFC-02)

8. Operating Process for Portable Oil/Water Interface Detector.

(Model : T2000-TFC-02)

9. Troubleshooting for Portable Oil/Water Interface Detector.

(Model : T2000-TFC-02)

* Technical Service Manual

TANKTECH CO., LTD

HEAD OFFICE :

1506-2, SONGJEONG-DONG, GANGSEO-GU, BUSAN, 618-270, KOREA

TEL : +82-51-979-1600 FAX : +82-51-979-1601

E-MAIL : [email protected]

http://www.tanktech.co.kr

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 3

Useful Measuring Jobs on Deck of Tanker and Applicable Rules

zIMO MEPC.5(XIII)

ANNEX 4

SPECIFICATION FOR OIL/WATER INTERFACE DETECTORS

The instrument should be capable of providing a rapid and accurate determination of the oil/water interface

in slop tanks and/or tanks where the separation of oil and water is effected and from which it is intended to

discharge effluent direct the sea.

zMARPOL 73/78

Chap. - Reg. 15, 3 (b)Ⅱ

Effective oil/water interface detectors approved by the Administration shall be provided for a rapid and

accurate determination of the oil/water interface in slop tanks and shall be available for use in other tanks

where the separation of oil and water is effected and from which it is intended to discharge effluent direct to

the sea.

Equipment Type Function Compliance with

Ullage level

Temperature gauging

SOLAS 1974,CHAPⅡ-2 REGULATION 60 PARAGRAPH 7

IMO, MSC/Circ.551 (IBC BCH CODE)

Closed Type Portable

Oil/Water Interface

Detector ( UTI)

Oil-water interface level MARPOL 73/78 ANNEXⅠ-CHAPⅡ- REGULATION 15, (3) (b)

IMO RESOLUTION MEPC.5(XIII) ANNEX 4.

Cargo Liquid Sampling

Device

Liquid sampling OCIMF, API STANDARD

RESTRICED WITH CLOSED SAMPLING OF LIQUID SAMPLING

Inert Gas Sampling Hose

& Adapter

Oxygen and flammable gas

concentration measuring

IMO REQUIREMENT ON TANKER SAFETY AND POLLUTION

PREVENTION, 1978-RESOLUTION A.446(XI), 6.6

Pressure Gauge Inert gas press. gauging IMO REQUIREMENT ON TANKER SAFETY AND POLLUTION

PREVENTION, 1978-RESOLUTION A.446(XI), 6.6(b)

Tank Bottom Liquid and

Sediments Checking

Device

Tank bottom dryness,

& sediment checking

IMO REQUIREMENT ON TANKER SAFETY AND POLLUTION

PREVENTION, 1978-RESOLUTION A.446(XI) 4.4.4

Shut On/Off Valve Vapor lock Installation of

portable tank measuring sys.

MARPOL 1973/78 ANNEX I, REGULATION 13b(3)

SOLAS 1974,CHAPⅡ-2 REGULATION 60, PARAGRAPH 7

(REQUIREMENT OF CLOSED ULLAGE SYSTEM)

MARPOL 1973/78 ANNEX I-CHAP II-REGULATION 15, (3) (B) AND

SOLAS 1974,CHAPⅡ-2 REGULATION 62, PARAGRAPH 17

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 4

Type of Potable Equipment for IBC BCH CODE

zIBC Code : (International Code for the Construction and Equipment of Ships Carrying Dangerous

Chemicals in Bulk)

zIBC Code-Chap. 17-Summary of Minimum Requirements

Mixtures of noxious liquid substances presenting pollution hazard only and which are provisionally

assessed under regulation 3 (4) of Annex II of MARPOL 73/78, may be carried under the requirements

of the code applicable to the appropriate position of the entry in this chapter for ‘noxious liquids, not

otherwise specified’.

zIBC Code-Chap. 13-1.3.1 Gauging

13.1.1 Cargo tanks should be fitted with one of the following types of gauging devices

13.1.2 Gauging devices should be independent of the equipment required under 15.19

13.1.3 Open gauging and restricted gauging should be allowed only where:

1) open venting is allowed by the code; or

2) means are provided for relieving tank pressure before the gauge is operated.

13.1.4 Types of gauging for individual products are shown in column “j” in the table of Chapter 17.

Table of IBC Code- Chapter 13 Instrumentation-13.1 Gauging

Equipment Type Function

1. OPEN DEVICE

Which makes use of an opening in the tanks and may

expose the gauge to the cargo of its vapour. An example of

this is the ullage opening.

2. RESTRICTED

DEVICE

Which penetrates the tank and which, when in use, permits

a small quantity of cargo vapour or liquid to be exposed to

the atmosphere. When not in use, the device is completely

closed. The design should ensure that no dangerous

escape of tank contents (liquid of spray) can the place in

opening the device.

3. CLOSED DEVICE

Which penetrates the tank, but which is part of a closed

system and keeps tank contents form being released.

Examples are the float-type systems, electronic probe,

magnetic probe and protected sight glass. Alternatively an

indirect device which does not penetrate the tank shell and

which is independent of the tank may be used. Examples

are weighing of cargo, pipe flow meter.

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 5

zBCH Code : (Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk)

zBCH CODE CHAP-III C-Gauging

3.9 General : Cargo tank should be fitted with one of the following types of gauging devices :

Gauging devices should be independent of the equipment required under 4.1 & 4.2 except for ships

constructed prior to 27 September 1982 where the requirements of 4.1 & 4.2 are met by a shutdown

valve which operates automatically.

3.10 Gauging for individual substances

Types of gauging for individual substances are shown in column “j” of the summary of minimum

requirements in chapter VI.

Table of BCH Code- Chapter III C-Gauging 3.9 General

Equipment Type Function

1. OPEN

DEVICE

Which makes use of an opening in the tank and may expose the gauge to

the cargo or its vapour. An example of this is the ullage opening.

2. RESTRICTED

DEVICE

which penetrates the tank and which, when in use, permits a small quantity

of cargo vapour or liquid to be exposed to the atmosphere. When not in

use, the device is completely closed. The design should ensure that no

dangerous escape of tank contents (liquid or spray) can take place in

opening the device.

3. CLOSED

DEVICE

which penetrates the tank, but which is part of a closed system and keeps

tank contents from being released. Examples are the float-type systems,

electronic probe, magnetic probe and protected sight-glass.

4. INDIRECT

DEVICE

which does not penetrate he tank shell and is independent of the tank. An

indirect measurement for determining the amount of cargo is used such as

weighing of cargo, pipe flow meter, etc.

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 6

All Kinds of TANKTECH Portable Measuring System

MADEINKOREA

T2000-TFS-01MODEL

0062/05

LIGHTON

MFG.NO

MFG.DATE

0062/05

LIGHTON MODEL

MFG.NO

MADEIN KOREA

MFG.DATE

T2000-TFC-02

GAS:INTERMITTENTBEEP

0062/05

MFG.NO

MFG.DATE

MODEL

WATER:CONTINUOUSBEEP

PORTABLEOIL/WATERINTERFACE DE TECTO R

OFF

OIL:FREQUENTBEEP

OFF

T2000-TFC-01

MADEINKOREA

DISPLAY

OIL:F R E QUENT BEEP

WATER: C ONTI NUOU S B EEP

GAS:INTERMITTENTBEEP

OIL:FREQUENTBEEP

WATER: CONTI NUOU S BEEP

OFF

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 7

Installation Chart for TANKTECH Portable Measuring System

T2000-TFC-01

Portable Oil/Water

Interface Detector

Gas-tight Type

Portable Oil/Water

Interface Detector Portable Oil/Water

Interface Detector Cargo Liquid

Sampling Device Cargo Liquid

Sampling Device Pressure Gauge Tank Bottom Liquid &

Sediments Checking

Device Inert Gas Sampling

& Adaptor

Gas-tight Type Restricted Type

T2000-TFC-02 T2000-TFS-01 T2000-TSS-01 T2000-TSS-02 T2000-TPG-01 T2000-TLS-01 T2000-TOS-01

TVC-01 TVC-02 TVC-04

Three Functions

1. Detection of Ullage

2. Detection of Interface

3. Temperature measurement

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 8

6. Specification for Portable Oil/Water interface Detector

Specification for Portable Oil/Water Interface Detector

7-1. General Description

TANKTECH's Portable Oil/Water Interface Detector, T2000 series offer the total solution for management

of cargo in tanks. This device can detect and measure the Ullage, Oil/Water Interface and Temperature

of cargo at the same time.

7-2. Model : T2000-TFC-02

Accuracy of ullage, interface detection ±2 mm

Indication of level divided

by ullage and interface Visible and Audible

Tape length 15M / 30M /40M

Tape graduation Metric

Tape resolution 1 mm

Diameter of probe 34 mm

Minimum detectable level 8 mm

Ambient temperature range -20℃to 70℃

Temperature sensor measurement range -20℃to 110℃

Temperature measurement resolution 0.1℃

Accuracy over calibration range ±0.1℃( 0℃to 60℃)

Temperature reading mode ℃(Celsius) or ℉

LCD display 4-7 Segment

Ball valve coupling

(Top mounting of model : TVC-02 ) PF 2-1/4” TAP

Weight 7.4 kg / 15M

Overall dimensions

(height×width×thickness) APP. 585×346×150 mm

Battery 9 Volt (MODEL : MN1604)

Intrinsically safe type Ex ia IIB T4

7-3. Material

MODEL : T2000-TFC-02 ( Body ) ----------------- : Aluminum casting ( JIS – AC4C-T6 )

7-4. Coating

IN / OUT SIDE ----------------------------------------- : Epoxy nylon coating

COLOR -------------------------------------------------- : Black

THICKNESS ( IN/OUT SIDE ) --------------------- : 80mic.

CLOSED TYPE PORTABLE OIL/WATER INTERFACE DETECTOR

FOR ULLAGE, OIL/WATER INTERFACE, TEMPERATURE GAUGING

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 9

8. Operating Process for Portable Oil/Water Interface Detector

8-1. General description

Thank you for purchasing TANKTECH Portable Tank Measuring equipment.

Our products will make marine cargo tank gauging more efficiently.

Our PMS reflects the three requisites for good management: economical price, user's safety, and

environmentally friendly.

Before using our products use, Please carefully read this manual. By doing so, proper handling

of the equipment can be ascertained.

8-2. About mark of the manual

This manual is written with [Warning] and [Caution] markings. These are important for a safe operation.

These precautions stress the important matter for the prevention of the physical accident and possible

damage to the equipment.

8-3. Application for model : T2000-TFC-02

Model : T2000-TFC-02

CLOSED TYPE PORTABLE OIL/WATER INTERFACE DETECTOR

FOR ULLAGE, OIL/WATER INTERFACE, TEMPERATURE GAUGING

Warning : When wrong use of equipment may cause body harm to user.

Caution : When wrong use of equipment may cause damage to the set.

Portable Tank Measuring System

TKT-TFC-02 (REV. 2-3) SHEET NO. : 10

8-4. Location & Function of Controls

1. Carrying Handle

2. Tape Reading Window.

3. Cleaning Adaptor : When rewinding the tape from the tank, to clean tape, rotate this wheel clockwise to the

arrow indicates “ON”. When letting down the probe into the cargo tank, knob show be

turned towards the arrow indicating “OFF”.

4. Rotating handle & push stopper for measuring and rewinding

5. Tape Reading Point (Ullage Read Out Point)

6. Sounding Tape : Non-corrosive tape scale coated by ETFE

7. Buzzer : Audible & distinguishable sound of Gas, Oil & Water

8. LCD Display

9. Display Panel

10. Power Switch

11. Tape Protection Device

12. Sensor Probe

13. Frame (Storage Barrel)

14. Grounding clamp for static discharge

TAN K TECH

Fig 1. Location & Function

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual