1 x Adapter
5V
1x Rechargeable Lithium Battery
1 x Smart clock 1 x USB Cable
1 x Quick Installation Guide
Quick Installation Guide
Smart Clock Camera
CameraClock
TT531WN-PRO
2.Preparation
Please prepare the below stuffs before you use it.
One smartphone or tablet PC(Mac or Windows PC is not
acceptable) with IOS 6.0 or Android 4.0 system(higher
version system is acceptable)
Wi-Fi Router
Install"Lizive" App
Device only can connect to 2.4Ghz Wi-Fi router.
Search "Lizvie" App from Apple Store or Google Player, then download.
Scan the QR Code below and install the App.
Make sure turn on the DHCP of router, and MAC address should be off.
Distance between router and smart clock should be within 5
mtrs during the configuration.
Please don't use special character such as Chinese,
symbol to name the WiFi.
Please don't use special character such as Chinese,
symbol as the password for the WiFi and Wi-Fi
password can not be none.
Don't use the Chinese or special symbol
to name the WiFi.
Don't use the Chinese or special symbol to
name the WiFi.
AndroidIOS
Plug in.
4
Please switch it from off to on.
5
Don't use the battery to active the device before
recharged enough.
The battery needs charge for 5 hours.
The device can work 2-3 hours when the battery is fully
charged.
Please remove the adapter in thunderstorm to avoid the
possible damage.
Warning
6Wait for 60 seconds after plug in, the device
is active when you hearing 3 sounds of Dong.
3.Operation Instruction, please read, IMPORTANT!
1Open the back cover. 2Take out the battery.
1.Packing List
Open the package, then make sure the TT531WN-PRO smart
clock (device) is intact, and with all the below accessories.
Titathink, we are standby for your any use question.
REV1.1.1
3Please remove the sleeves and put the
battery back. Don't reverse the + and -.
Finish
AT&T 11:57 AM
Configuration
100%
Warning
If no sounds, please switch off and turn on the
device again.
If still no sounds, please press "RESET" button
at the backside, and hold it for 5 seconds, the
device go back to default when you hear Ding.
Wait for 60 seconds, the device will restart.
If configuration failed
Please make sure input right password(check the
capital&small letter,blank)
Keep the environment is quite when do the
configuration.
Turn the volume of smart-phone or
tablet PC to maximum.
Make sure your smart phone is connected to
router before the configuration.
AT&T11:57 AM
NOSound
Howto find the camera ID?
Cannotscan QR code?
Plugin and turn on the device,you will hear a
soundwhen the device is active
Next
FirstStrep
AT&T11:57 AM
Scanthe QR code (Note:Open the back
cover,QR Code is at the backside of the
housing)
ScanQR Code Light
3When you heard 3 sounds of Dong, please
click Next.
4Scan the QR code on the sticker of the back
housing.
7Please put your smart phone or tablet PC to
the device within 10cm, then press to
configuration.
8Wait for 60 seconds, the configuration will be
done.
4.Configure Device
Open the App of Lizvie.
AT&T11:57 AM
AddCamera
FirstAdd
AT&T11:57 AM
MyCameras
Add Camera
1Click “ ”.
2Click First Add.
AT&T 11:57 AM
ConnectWiFi
Turn your smartphone to
maximum volume...
Completed
Pressto send
acousticwave
2.4G Wi-Fi
2.4G Wi-Fi Within 10 CM
AT&T11:57 AM
