OPERATION
1) Stand-Alone
a. Power on / off
Press the Power button for 2 seconds or longer.
The LCD and Power LED are turned on / off.
b. Change Wavelength
Press the Wavelength button, and then wavelength are
changed sequentially.
c. Store the measured data
Press the Store button, and then the measured data is stored
and the number of stored data is displayed on the LCD.
d. Check the stored data
Press the Store button for 2 se-
conds or longer, and then mPM-
100 enters into the 'Stored data
View Mode'. Date/Time and
Wavelength/Power are displayed
by turns at 1 second intervals. Press the Store button to go to
the previous data and Wavelength button to the next data. To
erase all stored data, press Wavelength button for 2 seconds
or longer. To exit the 'Stored data View Mode', press the Store
button for 2 seconds or longer.
2) Operation with Smartphone
Download and install the dedicated
App to your Smartphone in advance.
a. By Bluetooth: Press Wavelength
button for 2 seconds or longer and
turn on Scanner switch for searching
"mPM-100B" and click Skip button
b. By USB cable: Connect Smart
USB cable between mPM-100 and
Smartphone and power on. Smart-
phone will recognize mPM-100
automatically and will display a pop-up window. Press OK button
to enter into the operating mode.
c. To change the wavelength,
touch the wavelength indicator.
And select the wavelength you
want on the appeared “Select
Wavelength” window.
d. PM button (measure power)
e. IL button (To do Insertion Loss
Reference SET, touch the value
indicator and then measure I/L of
your materials.
f. SETTING button (set Username, )
Measure Area, Threshold, Unit of
dBm/dB, etc.)
g. SAVE button (save the measured data)
h. VIEW button (To check the saved data, touch the VIEW button
and then the “VIEW - SAVE LIST” window will appear. To view
the detail information of the measured data, touch each data list
in the “VIEW - SAVE LIST”
i. SHARE button (share the stored data)
j. DELETE button (delete the stored data)
k. SEND SMS (send the detailed data by SMS)
l. SEND PC (send the detailed data to PC)
3) Operation with PC
Download the dedicated program to your PC.
Install DRIVER first and then Software before use.
a. Run the Software and connect PC USB cable between mPM-
100 and PC, and power on mPM-100. To save the measure
data, click 'SAVE DATA' button. To check the saved data, click
'VIEW DATA' button.
b. To view detail information of the measured data, click each
data in the list.
TheFibers Inc.
A-1109 Keumkang Penterium IT Tower
282 Hagui-ro, Anyang-City, Korea
Tel: +82-31-381-6108
www.thefibers.com
