Thales KPG-opt 4FSM-IN User manual
Optical Multi Meter
KPG-opt 4FSM-IN
General Product Information KPG-opt 4FSM
KPG-opt
Table of content
1Introduction 2
1.1 Purpose 2
1.2 Description 2
2Material 4
3Technical Data 5
3.1 Electrical Data 5
3.2 Mechanical and climatic data 6
4 7
4.1 Front View 7
4.2 Design 10
4.3 Operation 11
5Main Functions 12
5.1 Operations construction team 12
5.1.1 Cable drum test 12
5.1.2 Measurement of a deployed cable 13
5.2 Measurements Diagnosticians 15
5.2.1 Power meter 16
5.2.2 Testframe 17
5.2.3 Optical Source 18
6Safety regulations 19
6.1 Operator protection 19
6.2 Protection of equipments 19
1
KPG-opt
1 Introduction
1.1 Purpose
1 The Optical Multi Meter KPG-opt is designed to test
fiber optic cable drums and entire fiber optic links.
2 The KPG-opt supports diagnosticians to detect
possible failures in the fiber optic link.
1.2 Description
The following main measurements are foreseen:
3 Construction teams:
- Attenuation measurement of an optical cable drum
with 2 or 4 fibers, single mode.
- Attenuation measurement of an optical signal of a
complete optical link.
- The KPG-opt automatically generates a Good/Bad
calculation of the measured values.
4 Diagnostic:
- Power measurement of an optical signal
2
KPG-opt
- Optical power source with selectable power level
- Optional transmission of user specific data frames
3
KPG-opt
2 Material
5
Figure 1 – KPG-opt Material
6 No QTY Description
1 1 KPG-opt
2 6 Batteries (AA-Type, LR6)
4
KPG-opt
3 Technical Data
3.1 Electrical Data
7 Transmitter (Single Mode) 1310 nm ± 40 nm
Tx Power Level for cable
test – 5 dBm
Tx Level for optical power
source
– 3 ... – 12 dBm
Stability of Tx Level ± 1 dBm
Rx measurement range – 35 dBm … 0 dBm
Accuracy ± 1 dBm
max. Input Level + 3 dBm
Resolution 0.1 dB
Autonomy (Battery life):
- Cable test
- Optical Transmitter
at + 20°C
400 Tests
4 h
Battery life at - 10°C is reduced to approx. 50 %
5
KPG-opt
3.2 Mechanical and climatic data
8
Dimensions
Equipment
L x B x H
270 x 145 x 80 mm
Weight
Equipment
1.6 kg
Temperature
Operation
Storage
– 10 to + 50 °C
– 30 to + 60 °C
Humidity IP 64
6
KPG-opt
4 Outline
4.1 Front View
9
Off >2sec
Reset
AUXMAIN
Laser on
2
1
3
4
5
7
6
Figure 2 – KPG-opt front view
7
KPG-opt
10 No Description
1 LCD – Display
2 Sensor (Brightness control for display)
3 LED Laser on
4 optical Connector "MAIN" with protection cap
5 optical Connector "AUX" with protection cap
6 Keypad
7 Rubber bumper (Shock absorber)
8
Table of contents
