Teledyne T102 User manual

MANUAL ADDENDUM

MODEL T102

TOTAL REDUCED SULFUR ANALYZER

with

MODEL 501 TRS

THERMAL CONVERTER

(to be used in conjunction with T101 Operation Manual, PN 07266)

9970 Carroll Canyon Road

SAN DIEGO, CA 92131-1106

USA

Toll-free Phone:

800-324-5190

Phone:

+1 858-657-9800

Fax:

+1 858-657-9816

Email:

api-sales@teledyne.com

Website:

http://www.teledyne-api.com/

07267B DCN6485

Teledyne API (TAPI)

11 June 2012

NOTICE OF COPYRIGHT

TRADEMARKS

All trademarks, registered trademarks, brand names or product names

appearing in this document are the property of their respective owners

and are used herein for identification purposes only.

07267B DCN6485

This page intentionally left blank.

07267B DCN6485

iii

SAFETY MESSAGES

Important safety messages are provided throughout this manual for the purpose of

avoiding personal injury or instrument damage. Please read these messages

carefully. Each safety message is associated with a safety alert symbol, and are

placed throughout this manual; the safety symbols are also located inside the

instrument. It is imperative that you pay close attention to these messages, the

descriptions of which are as follows:

WARNING: Electrical Shock Hazard

HAZARD: Strong oxidizer

GENERAL WARNING/CAUTION: Read the accompanying message for

specific information.

CAUTION: Hot Surface Warning

Do Not Touch: Touching some parts of the instrument without protection or

proper tools could result in damage to the part(s) and/or the instrument.

Technician Symbol: All operations marked with this symbol are to be

performed by qualified maintenance personnel only.

Electrical Ground: This symbol inside the instrument marks the central

safety grounding point for the instrument.

CAUTION

This instrument should only be used for the purpose

and in the

manner described in this manual. If you use this instrument

in a

manner other than that for which

it was intended, unpredictable

behavior could ensue with possible hazardous consequences.

NEVER use any gas analyzer to sample combustible gas(es)!

Note

For Technical Assistance regarding the use and maintenance of this instrument or any other

Teledyne API product, contact Teledyne API’s Technical Support Department:

Telephone: 800-324-5190

Email: sda_techsup[email protected]

or access any of the service options on our website at http://www.teledyne-api.com/

07267B DCN6485

CONSIGNES DE SÉCURITÉ

Des consignes de sécurité importantes sont fournies tout au long du

présent manuel dans le but d’éviter des blessures corporelles ou

d’endommager les instruments. Veuillez lire attentivement ces consignes.

Chaque consigne de sécurité est représentée par un pictogramme

d’alerte de sécurité; ces pictogrammes se retrouvent dans ce manuel et à

l’intérieur des instruments. Les symboles correspondent aux consignes

suivantes :

AVERTISSEMENT : Risque de choc électrique

DANGER : Oxydant puissant

AVERTISSEMENT GÉNÉRAL / MISE EN GARDE : Lire la consigne

complémentaire pour des renseignements spécifiques

MISE EN GARDE : Surface chaude

Ne pas toucher : Toucher à certaines parties de l’instrument sans protection ou

sans les outils appropriés pourrait entraîner des dommages aux pièces ou à

l’instrument.

Pictogramme « technicien » : Toutes les opérations portant ce symbole doivent

être effectuées uniquement par du personnel de maintenance qualifié.

Mise à la terre

: Ce symbole à l’intérieur de l’instrument détermine le point central

de la mise à la terre sécuritaire de l’instrument.

MISE EN GARDE

Cet instrument doit être utilisé aux fins décrites et de la manière décrite dans

ce manuel. Si vous utilisez cet instrument d’une autre manière que celle pour

laquelle il a été prévu, l’instrument pourrait se comporter de façon imprévisible

et entraîner des conséquences dangereuses.

NE JAMAIS utiliser un analyseur de gaz pour échantillonner des gaz

combustibles!

07267B DCN6485

WARRANTY

WARRANTY POLICY (02024 F)

Teledyne API (TAPI), a business unit of Teledyne Instruments, Inc., provides that:

Prior to shipment, TAPI equipment is thoroughly inspected and tested. Should

equipment failure occur, TAPI assures its customers that prompt service and support

will be available.

COVERAGE After the warranty period and throughout the equipment lifetime, TAPI stands ready

to provide on-site or in-plant service at reasonable rates similar to those of other

manufacturers in the industry. All maintenance and the first level of field

troubleshooting are to be performed by the customer.

NON-TAPI MANUFACTURED EQUIPMENT

Equipment provided but not manufactured by TAPI is warranted and will be repaired

to the extent and according to the current terms and conditions of the respective

equipment manufacturer’s warranty.

Product Return All units or components returned to Teledyne API should be properly packed for

handling and returned freight prepaid to the nearest designated Service Center.

After the repair, the equipment will be returned, freight prepaid.

The complete Terms and Conditions of Sale can be reviewed at

http://www.teledyne-api.com/terms_and_conditions.asp

CAUTION – Avoid Warranty Invalidation

Failure to comply with proper anti-Electro-

Static Discharge (ESD) handling and packing

instructions and Retu

rn Merchandise Authorization (RMA) procedures when returning

parts for repair or calibration may void your warranty. For anti-

ESD handling and

packing instructions please refer to “Packing Components for Return to Teledyne API’s

Customer Service” in the Primer on Electro-Static Discharge section of this manual, and

for RMA procedures please refer to our Website at http://www.teledyne-api.com under

Customer Support > Return Authorization.

07267B DCN6485

This page intentionally left blank.

07267B DCN6485

vii

ABOUT THIS MANUAL

This T102 Addendum, PN 07267, is comprised of multiple documents as follows.

Part

No. Rev Name/Description

07267 B T102 Addendum

05515 B T102 Menu Trees (inserted as Appendix A in this addendum)

07349 1/7/11 Spare Parts List (located in Appendix B of this addendum)

05517 C Repair Questionnaire (inserted as Appendix C in this addendum)

03404 L Assembly Diagram, M501TS Converter

05764 A Wiring Diagram, M501TS (034040100) (located in Appendix D of this

addendum)

NOTE

Please read this manual in its entirety before making any attempt made to operate the instrument.

REVISION HISTORY

T102/501 TRS Addendum, PN07267

Date

Rev

DCN

Change Summary

2012 June 11

6485

Administrative updates

2011 February 4

5975

Initial Release

07267B DCN6485

viii

This page intentionally left blank.

07267B DCN6485

This manual suits for next models

Table of contents

Other Teledyne Measuring Instrument manuals

Teledyne

Teledyne T360 User manual

Teledyne

Teledyne GFC7001T User manual

Teledyne

Teledyne T400 User manual

Teledyne

Teledyne 3350 User manual

Teledyne

Teledyne 430 User manual

Teledyne

Teledyne ADFM Pro20 User manual

Teledyne

Teledyne T3SP Series User manual

Teledyne

Teledyne HVG-2020A User manual

Teledyne

Teledyne T300 User manual

Teledyne

Teledyne EXPLORER User manual

Teledyne

Teledyne 730 Bubbler User manual

Teledyne

Teledyne 1220 User manual

Teledyne

Teledyne BENTHOS UDB-9000 User manual

Teledyne

Teledyne IsoPlane SCT-320 User manual

Teledyne

Teledyne HASTINGS Everywhereyoulook 200 Series User manual

Teledyne

Teledyne HASTINGS 200 Series User manual

Teledyne

Teledyne HASTINGS HFM-300 User manual

Teledyne

Teledyne 9110AH User manual

Teledyne

Teledyne 6600 User manual

Teledyne

Teledyne 100E User manual

Teledyne

Teledyne ADQ8-4X User manual

Teledyne

Teledyne N500 User manual

Teledyne

Teledyne GFC7000EU User manual

Teledyne

Teledyne PS200 Series Manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual