Teledyne T101 User manual

OPERATION MANUAL

MODEL T101

UV FLUORESCENCE H2S ANALYZER

TELEDYNE MONITOR LABS

35 INVERNESS DRIVE EAST

ENGLEWOOD, CO 80112

USA

Toll-free Phone:

800-846-6062

Phone:

303-792-3300

Fax:

Spare Parts:

Repairs:

303-799-4853

800-934-2319

800-324-5190

Email:

tml_support@teledyne.com

Website:

http://www.teledyne-ml.com/

072660000 Rev. B

Teledyne Monitor Labs

May 2016

NOTICE OF COPYRIGHT

TRADEMARKS

All trademarks, registered trademarks, brand names or product names appearing

in this document are the property of their respective owners and are used herein

for identification purposes only.

This page intentionally left blank.

iii

SAFETY MESSAGES

Important safety messages are provided throughout this manual for the purpose of

avoiding personal injury or instrument damage. Please read these messages

carefully. Each safety message is associated with a safety alert symbol. They are

placed throughout this manual. The safety symbols are also located inside the

instrument. It is imperative that you pay close attention to these messages, the

descriptions of which are as follows:

WARNING: Electrical Shock Hazard

HAZARD: Strong oxidizer

GENERAL WARNING/CAUTION: Read the accompanying

message for specific information.

CAUTION: Hot Surface Warning

Do Not Touch: Touching some parts of the instrument

without protection or proper tools could result in damage to the

part(s) and/or the instrument.

Technician Symbol: All operations marked with this symbol

are to be performed by qualified maintenance personnel only.

Electrical Ground: This symbol inside the instrument marks

the central safety grounding point for the instrument.

CAUTION

This instrument should only be used for the purpose

and in the

manner described in this manual. If you use this instrument

in a

manner other than that for which it was int

ended, unpredictable

behavior could ensue with possible hazardous consequences.

NEVER use any gas analyzer to sample combustible gases!

Note

For Technical Assistance regarding the use and maintenance of this instrument or any other

Teledyne ML product, contact Teledyne ML’s Technical Support Department:

Telephone: 800-846-6062

Email: tml_support@teledyne.com

or access any of the service options on our website at http://www.teledyne-ml.com/

CONSIGNESDE SÉCURITÉ

Des consignes de sécurité importantes sont fournies tout au long du présent

manuel dans le but d’éviter des blessures corporelles ou d’endommager les

instruments. Veuillez lire attentivement ces consignes. Chaque consigne de

sécurité est représentée par un pictogramme d’alerte de sécurité; ces

pictogrammes se retrouvent dans ce manuel et à l’intérieur des instruments. Les

symboles correspondent aux consignes suivantes :

AVERTISSEMENT : Risque de choc électrique

DANGER : Oxydant puissant

AVERTISSEMENT GÉNÉRAL / MISE EN GARDE : Lire la consigne

complémentaire pour des renseignements spécifiques

MISE EN GARDE : Surface chaude

Ne pas toucher : Toucher à certaines parties de l’instrument sans

protection ou sans les outils appropriés pourrait entraîner des

dommages aux pièces ou à l’instrument.

Pictogramme « technicien » : Toutes les opérations portant ce

symbole doivent être effectuées uniquement par du personnel de

maintenance qualifié.

Mise à la terre : Ce symbole à l’intérieur de l’instrument détermine le

point central de la mise à la terre sécuritaire de l’instrument.

MISE EN GARDE

Cet instrument doit être utilisé aux fins décrites et de la manièr

décrite dans ce manuel. Si vous utilisez cet instrument d’une

autre manière que celle pour laquelle il a été prévu, l’instrument

pourrait se comporter de façon imprévisible et entraîner des

conséquences dangereuses.

NE JAMAIS utiliser un analyseur de gaz pour échantillonner des

gaz combustibles!

WARRANTY

WARRANTY POLICY (02024 F)

Teledyne Monitor Labs (TML), a business unit of Teledyne Instruments, Inc.,

provides that:

Prior to shipment, TML equipment is thoroughly inspected and tested. Should

equipment failure occur, TML assures its customers that prompt service and support

will be available.

COVERAGE After the warranty period and throughout the equipment lifetime, TML stands ready

to provide on-site or in-plant service at reasonable rates similar to those of other

manufacturers in the industry. All maintenance and the first level of field

troubleshooting are to be performed by the customer.

NON-TML MANUFACTURED EQUIPMENT

Equipment provided but not manufactured by TML is warranted and will be repaired

to the extent and according to the current terms and conditions of the respective

equipment manufacturer’s warranty.

Product Return All units or components returned to Teledyne ML should be properly packed for

handling and returned freight prepaid to the nearest designated Service Center.

After the repair, the equipment will be returned, freight prepaid.

The complete Terms and Conditions of Sale can be reviewed at

http://www.teledyne-ml.com/terms_and_conditions.asp

CAUTION – Avoid Warranty Invalidation

Failure to comply with proper anti-Electro-Static Discharge (ESD) handling and packing

instructions and Return Merchandise Authorization (RMA) procedures when returning

parts for repair or calibration may void your warranty. For anti-

ESD handling and

packing instructions please refer to “Packing Components for Return to Teledyne ML” in

the Primer on Electro-Static Discharge section of this manual, and for RMA procedures

please refer to our Website at http://www.teledyne-ml.c om under Customer Support >

Return Authorization.

This page intentionally left blank.

Table of contents

Other Teledyne Measuring Instrument manuals

Teledyne

Teledyne Mixchek User manual

Teledyne

Teledyne 3350 User manual

Teledyne

Teledyne First Responder CG Instruction Manual

Teledyne

Teledyne SeaBat T Series User manual

Teledyne

Teledyne N500 User manual

Teledyne

Teledyne Everywhereyoulook T3PM1100 User manual

Teledyne

Teledyne 402R-EU User manual

Teledyne

Teledyne ULTRAFLOW 150 User manual

Teledyne

Teledyne 4220 Operating instructions

Teledyne

Teledyne 440 User guide

Teledyne

Teledyne 6600 User manual

Teledyne

Teledyne 1220 User manual

Teledyne

Teledyne TED 191 User manual

Teledyne

Teledyne GFC7000EU User manual

Teledyne

Teledyne 730 Bubbler User manual

Teledyne

Teledyne WIRELESS GROUNDLINK WQAR User manual

Teledyne

Teledyne 400E User manual

Teledyne

Teledyne 465L User manual

Teledyne

Teledyne 2000A-EU User manual

Teledyne

Teledyne Everywhereyoulook T3PM1100 User manual

Teledyne

Teledyne 200E User manual

Teledyne

Teledyne 9110AH User manual

Teledyne

Teledyne 3300TB User manual

Teledyne

Teledyne AX300 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual