Teledyne Lecroy Quantumdata 780E User manual

780E Video Generator / Analyzer –Quick Start Guide Page 1

September 13, 2018

P/N 68-00231 - Rev. B1

780E Video Generator / Protocol Analyzer

for HDMI, DisplayPort & HDBaseT Testing

Quick Start Guide

Rev: B1

780E Video Generator / Analyzer –Quick Start Guide Page 2

September 13, 2018

P/N 68-00231 - Rev. B1

1Overview of 780E Protocol Analyzer / Generator

This section provides an overview of the Teledyne LeCroy quantumdata™780E Video Generator / Analyzer. The 780E

provides HDMI, HDBaseT and DisplayPort and Tx and Rx ports and digital audio output ports. The HDMI ports support

600MHz operation. The DisplayPort ports support 5.4 Gb/s lane rates and the HDBaseT ports support 300MHz pixel

rates.

Note: The DisplayPort interfaces are optional with the 780E P/N 00-00251; they are standard with the 780E P/N 00-

00243.

1.1 Scope of this Quick Start Guide

This Quick Start Guide provides instructions on the 780E connectors, power up instructions and basic turn up procedures.

This Quick Start Guide does not provide instructions on the operational features and functions of the 780E. Please refer to

the 780E User Guide available on the Quantum Data website for detailed instructions on the operation of the 780E to

achieve the variety of applications it supports.

Note: Please be sure to check the Quantum Data website for updates to this document and to the User Guide.

1.2 780E Video Generator / Analyzer

The 780E Video Generator / Analyzer is a handheld multimedia pattern generator and analyzer that enables you to

conduct quick, verification testing of your digital video devices, systems and installations. The 780E is equipped with both

reference source and a reference sink HDMI, DisplayPort and HDBaseT interfaces allowing you to test audio, video and

protocols—HDCP, EDID, CEC & infoframes, DP Link Training—of any type of these digital video interface devices:

sources, repeaters, distribution gear and sinks. Its portability makes it ideal for your bench and for use in the field.

Because the 780E has both output and input ports, you can test your digital video cables and systems with splitters,

extenders and switches as well with the pixel error rate test feature.

A 7 inch color touch display makes the 780E easy and convenient to use. When testing a digital video source device you

can toggle between operating the unit through the touch screen and viewing the incoming video from the source.

780E Video Generator / Analyzer –Quick Start Guide Page 3

September 13, 2018

P/N 68-00231 - Rev. B1

780E Front Edge

780E Rear Edge

1.3 What is in the 780E shipping box?

The 780E instrument shipping container includes the items listed in Table 1-1 below:

Table 1-1: 780E Shipping Box Contents

Item Description

Part No.

780E Video Generator / Analyzer. (Includes DisplayPort interfaces as a standard feature)

00-00243

780E Video Generator / Analyzer. (DisplayPort interfaces are an optional feature)

00-00251

12V DC (5 amp) Power Supply / Adapter / Charger.

25-00110

Line cord for 12V Power Supply.

30A00400A03

Cable: HDMI-to-HDMI Type A.

30-00146

Cable: DP-to-DP Standard. (Not included with 780E P/N 00-00251)

30-00162

Cable: USB.

30-00163

780E Video Generator / Analyzer –Quick Start Guide Page 4

September 13, 2018

P/N 68-00231 - Rev. B1

2Physical Interfaces of the 780E Protocol Analyzer / Generator

This section describes the administration, video and audio interfaces on the 780E test instrument.

2.1 Video Interfaces

Table 2-1 below describes the video interfaces on the 780E test instrument, these interfaces are used to render test

patterns for testing consumer electronic HDTVs and computer displays.

Table 2-1: 780E Video Interfaces

Video Interface

Description

HDMI (1) Output Type A

Single link HDMI output connector.

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Pixel rate: Timings up to 4K x 2K –600MHz.

DVI support through HDMI to DVI adapter cable (RGB, 4:4:4, 24 bit).

Audio: LPCM, Dolby Digital and DTS.

HDMI (1) Input Type A

Single link HDBaseT input connector.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Pixel rate: Timings up to 4K x 2K –600MHz.

DisplayPort Output Standard Connector

(Optional with 780E P/N 00-00251)

Single link HDBaseT output connector.

Bit Depth: 18/24/30/36/48 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Link Rates: 1.62, 2.70, 5.40 Gb/s.

Lanes: 1,2,4

Audio: LPCM.

DisplayPort Input Standard Connector

(Optional with 780E P/N 00-00251)

Single link HDMI input connector.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Link Rates: 1.62, 2.70, 5.40 Gb/s.

Lanes: 1,2,4

HDBaseT (1) Output RJ45

Single link HDBaseT output connector.

Bit Depth: 24/30/36 bit.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Pixel rate: Timings up to 4K x 2K - 300MHz.

Audio: LPCM, Dolby Digital and DTS.

HDBaseT (1) Input RJ45

Single link HDMI input connector.

Colorimetry: RGB, YCbCr.

Sampling: 4:4:4 and 4:2:2.

Pixel rate: Timings up to 4K x 2K - 300MHz.

780E Video Generator / Analyzer –Quick Start Guide Page 5

September 13, 2018

P/N 68-00231 - Rev. B1

2.2 Digital Audio interfaces

Table 2-2 below describes the distinct digital audio interfaces supported on the 780E Multi-Protocol Analyzer / Generator.

Note audio is supported through the HDMI, DisplayPort, HDBaseT interfaces; however the table below only lists the

separate digital interfaces.

Table 2-2: 780E Audio Interfaces

Interface

Description

SPDIF - RCA

SPDIF RCA audio connector:

Channels: 8 (clips)

Bits per sample: 16, 20, 24.

Sampling rates (kHz): 32.0, 44.1, 48.0, 96.0

Formats: LPCM, Dolby Digital (clips), DTS (clips)

Optical –JIS FOS

Optical audio connector:

Channels: 8 (clips)

Bits per sample: 16, 20, 24.

Sampling rates (kHz): 32.0, 44.1, 48.0

Formats: LPCM, Dolby Digital (clips), DTS (clips)

2.3 Headphone jack and speaker

The 780E test instrument is equipped with a headphone Jack and speaker for monitoring the incoming audio from an

HDMI, DisplayPort and HDBaseT source.

2.4 Administrative Interface

The 780E test instrument is equipped with a USB interface. This interface is used to download custom bitmaps and to

upgrade firmware and issue commands. The USB interface is a peripheral device. There are two modes:

COM - Command Mode. Used for sending basic commands to set the interface, select formats and patterns.

Disk - Mass Storage Mode. Used for downloading bitmaps, audio clips and upgrading firmware or gateware.

780E Video Generator / Analyzer –Quick Start Guide Page 6

September 13, 2018

P/N 68-00231 - Rev. B1

2.5 SD Card Slot

The 780E test instrument is equipped with an SD card slot. The SDCard slot is used for storing and loading bitmaps,

reports, and for recovery in the event of a failed upgrade.

Note: 780E Image above shows the front edge with SD card slot.

780E Video Generator / Analyzer –Quick Start Guide Page 7

September 13, 2018

P/N 68-00231 - Rev. B1

3General Operation

This section describes power up, power usage and general operation.

3.1 Power Considerations

The 780E has a rocker style power switch on the back panel. Refer to the photo below.

The 780E is supplied with the Part No 25-00110 12V DC power supply and charger as well as a part number

30A00400A03 line cord.

3.2 Tilt Bail

The 780E has support bail similar to the 780 (shown below) for convenience in viewing. This is depicted in the illustration

below.

3.3 Navigating through the 780E User Interface

The 780E user interface is a color touch screen display 800 by 480. A single touch will activate an item on the screen or

take you down to a lower level menu. A +indicates that you have to double touch to navigate down to a lower level menu.

780E Video Generator / Analyzer –Quick Start Guide Page 8

September 13, 2018

P/N 68-00231 - Rev. B1

3.3.1 Home Screen

The Home screen is shown below.

3.3.2 Status Bar

The 780E has a status bar on the bottom of the screen. This status bar is present no matter what screen you are viewing.

The items in the status bar are described in the Table 3-1.

Table 3-1: Status Bar

Type

Status Item

Function

Video Type Status

Indicates the status of video on the digital interface

In ports. This includes:

Video interface: HDMI, DVI, HDBaseT,

DisplayPort

Following apply to HDMI, HDBaseT, DisplayPort

Color depth: 8, 10, 12 (6, 8, 10, 12, 16 for DP)

Video type: RGB or YCbCr

Sampling mode: 4:4:4, 4:2:2, 4:2:0

780E Video Generator / Analyzer –Quick Start Guide Page 9

September 13, 2018

P/N 68-00231 - Rev. B1

Video Resolution Status

Indicates the video resolution on the HDMI In port.

This includes:

Horizontal Active in pixels

Vertical Active in pixels

Frame rate

Video Identification Status

Indicates the CEA video identification code.

3D Status

Indicates the status of 3D video. This includes:

3D enabled or disabled

3D format

AVmute Status

Indicates the AVmute status, enabled or disabled.

HDCP Status

Indicates whether the incoming HDMI video is

encrypted with HDCP.

+5V Status

Indicates whether +5V is detected from the source.

OUT

Video Type

Status/Selection

Indicates the video on the video Out ports. This

includes:

Video interface: HDMI, DVI, DisplayPort,

HDBaseT

Provides access to the Video Signal Type screen.

Video Resolution

Status/Selection

Indicates the video resolution on the video interface

Out port. This includes:

Horizontal Active in pixels

Vertical Active in pixels

Frame rate

Provides access to the Video Format screen.

Video Pattern

Status/Selection

Indicates the video pattern on the HDMI Out port.

Provides access to the Video Pattern screen.

3D Format

Status/Configuration

Indicates the status of 3D video (applies to HDMI

and HDBaseT). This includes:

3D enabled or disabled

3D format

Provides access to the 3D video configuration

screen.

Audio Status

Indicates the Audio status:

Audio format

Audio channels

Audio sampling rate

HDCP Status

Indicates whether the incoming video on the HDMI,

HDBaseT and DisplayPort In port is encrypted with

HDCP.

780E Video Generator / Analyzer –Quick Start Guide Page 10

September 13, 2018

P/N 68-00231 - Rev. B1

AVMute

HDCP Status

+5V Status

Indicates the status of:

AVMute active/inactive status

HDCP active/inactive status

+5V present/not present status

3.4 Running Basic Tests on Sink Devices

This Quick Start Guide does not cover detailed procedures for most common operations. However, the following

information will get you started conducting some of the more common operations for testing sinks.

1. To set the signal type, touch select the Interface button from the Home menu as shown below:

2. To select the video resolution, touch select the Format button from the Home menu as shown below:

Table of contents

Other Teledyne Lecroy Measuring Instrument manuals

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE User manual

Teledyne Lecroy

Teledyne Lecroy M21 User manual

Teledyne Lecroy

Teledyne Lecroy PPE6KV-A User manual

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series User manual

Teledyne Lecroy

Teledyne Lecroy WaveAce Lab 3 User manual

Teledyne Lecroy

Teledyne Lecroy Frontline 802.11 Mounting instructions

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook CP030B User manual

Teledyne Lecroy

Teledyne Lecroy 980 User manual

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook Frontline X500 User manual

Teledyne Lecroy

Teledyne Lecroy PP011-2 User manual

Teledyne Lecroy

Teledyne Lecroy DL03-ISO User manual

Teledyne Lecroy

Teledyne Lecroy PP017 User manual

Teledyne Lecroy

Teledyne Lecroy Frontline BPA 600 Mounting instructions

Teledyne Lecroy

Teledyne Lecroy PP016 User manual

Teledyne Lecroy

Teledyne Lecroy CP150 User manual

Teledyne Lecroy

Teledyne Lecroy HVD3102 User manual

Teledyne Lecroy

Teledyne Lecroy USB Advisor T3 User manual

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8000HD User manual

Teledyne Lecroy

Teledyne Lecroy Summit T3-8 User manual

Teledyne Lecroy

Teledyne Lecroy ZD200 User manual

Teledyne Lecroy

Teledyne Lecroy BPA 600 User manual

Teledyne Lecroy

Teledyne Lecroy PP006D User manual

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series User manual

Teledyne Lecroy

Teledyne Lecroy frontline SODERA User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual