Tekvox TEK 380-HD HDMI/SDI User manual
TEK 380-HD HDMI/SDI
Conference Camera
User’s Guide
TEK 380-HD Conference Camera
2
TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216
V031513
Table of Contents
Overview......................................................................................................................... 4
Main Features.................................................................................................................4
Camera and Lens......................................................................................................5
Pan/Tilt Movement ....................................................................................................5
Rear Connectors.......................................................................................................6
RS-232 Pin Out...................................................................................................6
OSD Menu ......................................................................................................................8
Self-testing OSD Menu..............................................................................................8
Dome OSD................................................................................................................8
LENS OSD................................................................................................................9
IR Remote Controller..................................................................................................... 10
Camera Switch Settings.................................................................................................11
SW1 Address Setting Table..................................................................................... 11
SW2 Communication Protocol Settings................................................................... 11
IR Address Select....................................................................................................12
Installation..................................................................................................................... 12
Size............................................................................................................................... 12
Specifications................................................................................................................ 13
VISCA PROTOCOL....................................................................................................... 15
Command Set .........................................................................................................15
Inquiry Command List .............................................................................................17
TEK 380-HD Conference Camera
4
TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216
Overview
The TEK 380-HD conference camera is a high definition PTZ camera with 10X optical zoom lens and has
both HDMI and SDI outputs. With its small size, 16:9 aspect ratio, 2.1 Mega pixel CCD and 64 presets this
camera makes an excellent camera for videoconferencing rooms and lecture capture systems. The
camera can be setup for multiple resolutions and be ceiling mounted. Having a smaller size than most
similar quality cameras allows for smaller mounting brackets and cubby holes. This also makes the
camera not as visually intrusive as larger cameras. The camera can be controlled using the Sony®
VISCA™ or the PELCO P/D Command set. This makes the camera directly replaceable with other like
cameras.
Main Features
One of the most important features of this camera is it can support 64 presets (PELCO) 63 (VISCA) within
the camera. This makes the camera much easier to control as compared to other cameras that are only 6
to 15 presets. Other features include up to1080i@60 resolution with both HDMI and SDI outputs.
Camera and Lens
Video CMOS Sensor: 1/2.5 inch super quality HD CMOS transducer
Image: 16:9 2.1 Mega pixel
Resolution: HD 1080i@60; 1080p30; 720p/30; 720p/60
Lens zoom: 10x optical zoom, f=4.5-45mm F1.8-2.2
Focus, 1.0Lux at F 1.8
Wide angle lens: 0.7x wide angle lens, caliber 30mm
Visual Angle: 5.4°(farness) -70°(nearness)
Minimum Illumination: 10LUX
White Balance: Auto/Sunlight/Cloudiness/Shade/fluorescence white balance mode
Focus: Auto/Manual
Iris: Auto/Manual Electronic
Shutter: Auto Black light compensation: Auto
S/N Ratio: 50dB3.
Auto sensing position for ceiling installations
Pan/Tilt Movement
Pan Rotation: ±177.5 degree
Tilt Rotation: ±45 degree
Pan speed: 0.5°- 200°/sec
Tilt speed: 0.5°-150°/sec
Preset Speed: Pan running: 120°/sec
Tilt running: 100°/sec
Preset: 64 preset position
TEK 380-HD Conference Camera
6
TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216
Rear Connectors
HD-SDI
HDMI
IR Receiver
RS-232 In and Out
RS-485 (Input Connector)
12V DC
RS-232 Pin Out
Camera is shipped with a VISCA to DB-9 Female and an RS-485 adapter cable. When connecting the
camera to a control system, use the supplied RS-232 cable and connect to the RS-232 Input
connector. Only the TX, RX and GND need to be connected,
Input Connector –Connect to Control System using a straight through DB-9 and supplied
RS-232 Cable.
No
Function
1
DTR IN
2
DSR IN
3
TXD IN
4
GND
5
RXD IN
6
GND
7
NO Connection
8
NO Connection
RS-232C OUT Connector
No
Function
1
DTR OUT
2
DSR OUT
3
TXD OUT
4
GND
5
RXD OUT
6
GND
7
NO Connection
8
NO Connection
Camera Union
TEK 380-HD Conference Camera
8
TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216
OSD Menu
Access OSD menu to view the features of camera and change the settings. Note: Camera cannot move
pan/tilt when OSD menu is displaying.
Self-testing OSD Menu
When the camera is powered on, the camera performs a self-test and displays an OSD menu as following.
ADDRESS（Camera address）
BUADRATE（Camera baud rate）
PROTOCOL（PTZ Control Protocol）
CONTROL（Camera control type）
LENSTYPE（Camera module adopted）
DOMETYPE（Camera model No.）
VENDER（Manufacturer name）
VERSION （Factory version N
Dome OSD
Press “DOME OSD” button on remote controller to display and make changes to the camera’s Pan and Tilt
functions and its operation. When changes are made to these settings, their values are stored in the
camera’s nonvolatile memory.
These setting include:
PAN SPEED Default value: 30
oAdjustable pan movement speed scope 1~63
TILT SPEED Default value: 30
oAdjustable tile movement speed scope 1~63
SCAN SPEED Default value: 6
oAdjustable pan movement speed scope 1~63
TOUR PATH Default value: 1
oOptional tour path at 1~4
TOUR DWELL(Tour duration time) Default value: 5
oTour duration is 1~60 seconds
PROPORTION (Speed matching) Default value: ON
oON enable speed match function
AUTO REV Default value: P
o(P) Image auto flip (positive) / (N) upside down/OFF
FRAME FORMAT Default value: 1080i/60
oOther Settings - 1080p/30, 1080p/25, 1080p/24, 1080i/60, 1080i/50, 720p/60, 720p/50
OUTPUT TYPE Default value: DVI
oOther settings - HDMI / DVI
ASPECT RATIO (display mode) Default value: 16:9
oOther settings - 16:9/4:3
LENS OSD
Press “LENS OSD” button on remote controller to display and make changes to the camera’s Lens and its
image quality. When changes are made to these settings, their values are stored in the camera’s
nonvolatile memory.
ISS (Image Stable Mode) Default value: NO
oSUPPORT/NO Support option
ISE (Image Stable Mode) Default value: OFF
oISE: ON/OFF
BLC (Back light comp) Default value: OFF
oBLC: ON/OFF
SELECT SCENE Default value: INACTIVE
oSelect scene: ACTIVE/INACTIVE
SELECT SCENE Default value: NIGHT
oUnder Active situation: AUTO/WDR/HIGH/NIGHT option
METERING LIGHT MODE Default value: WDR
oOptional Mode: CENTER/SPOT/WDR
EXPOSE MODE Default value: PAE
oMode option: MANUAL/PAE/AAE/SAE
APERTURE MODE Default value:F1.8
oAperture range: F1.8—F11
SHUTTER SPEED Default value:1/5
oShutter speed range: 1/5—1/4000
EV CORRECTION Default value:+0
oOption value: -2/-1.66/-1.33/-1/-0.66/-0.33/0/ +0.33/+0.66/+1/ +1.33/+1.66/+2
ISO SENSITIVITY Default value: AUTO
oOption value:AUTO / MANUAL
MANUAL SETUP Default value:IS080
oUnder manual ISO sensitivity, the parameter could be set to:
ISO80/ISO100/ISO200/ISO400/ISO800 /ISO1000
FLICKER REDUCTION Default value: ON
oOption: ON / OFF
WHITE BALANCE Default value:AUTO
oOption value: AUTO/CUSTOM/MANUAL/DAYLIGHT
/CLOUDY/SHADE/FLW/FLN/FLD/TUNGSTEN
DIGITAL EFFECT Default value: NORMAL
oValue option: NORMAL/SEPIA/MONOCHROM/ POSTERIZE/SOLARIZE/NEGA
SHARPNESS REDUCTION Default value: MIDDLE
oSetting option: HIGH/MIDDLE/LOW
NOISE REDUCTION Default value: MIDDLE
oSetting option: HIGH/MIDDLE/LOW/OFF
CHROMA KEY CR Default value: LOW
oSetting option: HIGH/MIDDLE/LOW
CHROMA KEY CB Default value: LOW
oSetting option: HIGH/MIDDLE/LOW
AUTO SLOW SHUTRER Default value: OFF
oIn the situation of the light is dark to increase lighting volume.
This manual suits for next models
1
Table of contents
