Tektronix VM700T User manual

Instructions

VMUPG Option Upgrades

VM700T, VM700A VMTB, or VM700A VMTX

Video Measurement Set

075-0294-07

*P075029407*

075029407

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

HIn North America, call 1-800-833-9200.

HWorldwide, visit www.tektronix.com to find contacts in your area.

VMUPG Option Upgrades i

Table of Contents

Service Safety Summary 1....................................

Kit Description 3............................................

VMUPG Software Option Upgrades 3.................................

VMUPG Hardware Option Upgrades 3.................................

Installation Instructions 7....................................

Firmware Option Upgrades 8........................................

Hardware Option Upgrades 12........................................

VMUPG 1S Upgrade 15.............................................

VMUPG 1S -- EMI 16...........................................

VMUPG 1S -- SDI 17............................................

VMUPG 2S 22.....................................................

VMUPG 2S -- EMI 23...........................................

VMUPG 2S -- SDI 34............................................

VMUPG 40 -- Option 40 Audio Measurements 36.........................

VMUPG 41 -- Option 41 Six-Input Audio 39.............................

VMUPG 48 -- Option 48 GPIB interface 42..............................

VMUPG 3D -- Option 40 to Option 41 Conversion 44......................

Install the New Option Key 47........................................

Verify the Installation 50.............................................

Table of Contents

ii VMUPG Option Upgrades

List of Figures

Figure 1: Cover panels and circuit board retainer bar removal 13....

Figure 2: Right card cage retainer plate removal 14................

Figure 3: SDI panel and cable positioning 17.....................

Figure 4: SDI circuit board location 18..........................

Figure 5: SIMM installation and R32 location

(VM700T SN B020100 and B029999) 19......................

Figure 6: Acquisition board Installation 20.......................

Figure 7: Right side EMI bracket installation 24..................

Figure 8: Location of the EMI clip on the CPU I/O board 25........

Figure 9: Clamp-on ferrite bead position

(not for 119-4258-XX power supplies) 26......................

Figure 10: EMI Brackets and EMI gasket shield installation 27......

Figure 11: Rear panel screw removal

(VM700A with VMTB/VMTX) 29...........................

Figure 12: EMI gaskets and EMI fan filter installation

(VM700A with VMTB/VMTX) 30...........................

Figure 13: EMI Fan Filter location

(VM700T -- SN B029999 & below) 33.........................

Figure 14: Locating the audio option boards

in the left-side card cage 38.................................

Figure 15: Locating the audio option boards

in the left-side card cage 40................................

Figure 16: Locating the circuit boards in the left-side card cage 43...

Figure 17: Locating the audio option boards

in the left-side card cage 45.................................

Figure 18: Audio Analog circuit board showing the location

of the Input Selector circuit board (shaded) 46.................

Figure 19: Typical main configure menu 47.......................

Figure 20: Option key control menu 48..........................

Figure 21: Error message for invalid option key 49................

Figure 22: Option identification label 52.........................

Figure 23: Measurement set rear panel showing the

option label location 52....................................

Table of Contents

VMUPG Option Upgrades iii

List of Tables

Table 1: Check list for VMUPG 1S option upgrade 16..............

Table 2: Check list for VMUPG 2S option upgrade 23..............

Table 3: Screw sizes and types used in the rear panel installation 29.

Table of Contents

iv VMUPG Option Upgrades

VMUPG Option Upgrades 1

Service Safety Summary

Only qualified personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary before performing any service

procedures.

Do Not Service Alone. Do not perform internal service or adjustments of this

product unless another person capable of rendering first aid and resuscitation is

present.

Disconnect Power. To avoid electric shock, switch off the instrument power, then

disconnect the power cord from the mains power.

Use Care When Servicing With Power On. Dangerous voltages or currents may

exist in this product. Disconnect power, remove battery (if applicable), and

disconnect test leads before removing protective panels, soldering, or replacing

components.

To avoid electric shock, do not touch exposed connections.

Service Safety Summary

2VMUPG Option Upgrades

VMUPG Option Upgrades 3

Kit Description

This kit includes instructions for VMUPG software and hardware upgrades. Only

those parts needed to install the options are provided in this kit. Parts are also

provided to preserve EMI suppression.

VMUPG Software Option Upgrades

These instructions are for adding any one or a combination of the following

firmware option upgrades to the VM700T Video Measurement Set or the

VM700A Video Measurement Set with the VMTB or VMTX Turbo upgrade

installed. See page 8 for firmware option installation instructions.

These instructions support Tektronix modification M89159, for firmware

upgrade to archive number 000815.

HVMUPG 1G 2T Echo and Rounding of Black and White Measurements

HVMUPG 3B Dual Standard (Option 01 NTSC and Option 11 PAL)

HVMUPG 20 Teletext Measurements

HVMUPG 21 Camera Measurements

HVMUPG 22 Video Wander Measurements

HVMUPG 30 Component Measurements

HVMUPG 42 Audio/Video Timing Measurements

(requires either Option 40 or Option 41)

Products. The VMUPG firmware option upgrades can be installed in the

following products:

VM700T

VM700A with VMTB or VMTX installed

VMUPG Hardware Option Upgrades

These instructions are for adding any one or a combination of the following

hardware option upgrades to the VM700T Video Measurement Set or the

VM700A Video Measurement Set with the VMTB or VMTX Turbo upgrade

installed.

Kit Description

4VMUPG Option Upgrades

This kit includes: SDI and an SDI Interface Panel circuit board with installation

instructions and a short verification procedure. In addition, one SIMM is

replaced on the Acquisition (A18) circuit board and one Boot ROM is replaced

on the CPU board. See page 15 for installation instructions.

Products. The VMUPG 1S upgrade can be installed in the following products.

VM700T SN B020100 and Above

This kit includes: SDI, SDI Interface Panel and Acquisition (A18) circuit boards

with installation instructions and a short verification procedure. See page 22 for

installation instructions.

Products. The VMUPG 2S upgrade can be installed in the following products.

VM700T SN B019999 and Below

VM700A with VMTB or VMTX installed

This kit includes: Audio Analog (A13) and Audio Processor (A12) circuit boards

and the installation instructions with a short verification procedure. In addition,

two mini-XLR connectors are provided to allow the user to adapt existing

cabling to the connection method used for Option 40. Refer to the VM700T

Option 40/41/42 User Manual, provided with this kit, for connector pin

assignments. See page 36 for installation instructions.

Products. The VMUPG 40 upgrade can be installed in the following products.

VM700T

VM700A with VMTB or VMTX

This kit includes: Six-Input Audio Analog (A17) and Audio Processor (A12)

circuit boards. A 37-pin connector is provided to allow you to adapt existing

cabling to the connection method used for Option 41. Refer to the VM700T

Option 40/41/42 User Manual, provided with this kit, for connector pin

assignments and installation instructions for the connector and ferrite EMI core.

See page 39 installation instructions.

Products. The VMUPG 41 upgrade can be installed in the following products.

VM700T

VM700A with VMTB or VMTX

VMUPG 1S-

Option 1S Serial Digital

Interface

VMUPG 2S-

Option 1S Serial Digital

Interface

VMUPG 40-

Option 40 Audio

Measurements

VMUPG 41-

Option 41 Six-Input Audio

Other manuals for VM700T

This manual suits for next models

Table of contents

Other Tektronix Measuring Instrument manuals

Tektronix

Tektronix KEITHLEY 2600B Series User manual

Tektronix

Tektronix DSA8300 Use and care manual

Tektronix

Tektronix TLA7000 Series User manual

Tektronix

Tektronix Keithley 2601B-PULSE User manual

Tektronix

Tektronix BPA105 User manual

Tektronix

Tektronix PQA600C Quick start guide

Tektronix

Tektronix TLA 700 Series Product manual

Tektronix

Tektronix 4923 User manual

Tektronix

Tektronix TriMode P7700 Series User manual

Tektronix

Tektronix TPA-N-VPI User manual

Tektronix

Tektronix RSA306 Manual

Tektronix

Tektronix VM5000 Series Owner's manual

Tektronix

Tektronix Keithley 1756 User manual

Tektronix

Tektronix RSA3408B User manual

Tektronix

Tektronix Keithley 4200A-SCS-PKA User manual

Tektronix

Tektronix VM700T User manual

Tektronix

Tektronix AA5001 User manual

Tektronix

Tektronix RSA5106B Installation and maintenance instructions

Tektronix

Tektronix DSA8200 Series User manual

Tektronix

Tektronix 7D01 User manual

Tektronix

Tektronix PA4000 Series User manual

Tektronix

Tektronix SD-14 User manual

Tektronix

Tektronix P6417 User manual

Tektronix

Tektronix TTR500 series User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual