TO CONNECT WITH THE "AROFLY 2" APP AND TO
SETUP THE LINK TRANSMITTER
1. Turn power ON the "LINK" and turn on Bluetooth, on your phone.
2. The LINK TRANSMITTER code will show on the "AROFLY 2" APP,
click it to connect.
LINK TRANSMITTER: BUTTONS AND LED STATUS
LED STATUS
• Solid green: "LINK", not connected
with the AROFLY power meter.
• Solid blue: "LINK", connected with
the AROFLY power meter.
• Flashing red: On the "LINK", indicates
the battery of the AROFLY power
meter is low.
• Solid red: On the "LINK", it is a
warning message, please check the
status on the "AROFLY 2" APP.
• Alternating green, blue, and red: The
"LINK" is attempting to pair with the
AROFLY power meter.
AROFLY LED Activity On The
LINK TRANSMITTER
• Solid green: "LINK", not connected
with the Cadence sensor.
• Solid blue: "LINK", connected with
the Cadence sensor.
• Flashing red: On the "LINK", indicates
the battery of the Cadence sensor is low.
• Alternating green, blue, and red:
The "LINK" is attempting to pair with
the Cadence sensor.
Cadence LED Activity On The
LINK TRANSMITTER
• Solid blue: On the "LINK", indicates
Indoor mode, when riding indoor,
please select the correct bike trainer
on the "AROFLY 2" APP.
• Blue OFF: On the "LINK", indicates the
"LINK" is on Outdoor mode.
INDOOR/OUTDOOR Mode,
LED Activity
• Flashing red: On the "LINK", indicates
the battery of the "LINK" is low.
• Solid red: On the "LINK", indicates the
"LINK" battery is charging.
• Red OFF: On the "LINK", indicates the
"LINK" battery has been completed
charged.
• Solid blue: On the "LINK", indicates
transmitting ANT+ and BLE signals
simultaneously. Check the connection
status on the devices (Bike Computers
or the "AROFLY 2" APP).
LED Activity On The LINK
TRANSMITTER Showing
Connection With Other Bike
Computers Or With The
"AROFLY 2" APP.
