T&D RTR-71 User manual

User's Manual

Thank you for purchasing this product.

Carefully read and fully understand these

instructions before using this unit.

2009.04 16004094190 4th Edition

Notices about this User's Manual

・Please read this manual carefully before using the product.

・This manual cannot be reprinted, so please keep it in a safe place.

・We cannot guarantee nor are we responsible for safety if this product is

used in any manner other than was intended.

・Please follow the safety precautions carefully.

・Contents of this manual may be altered according to improvements made to

the product without notiﬁcation.

・On-screen messages in this manual may vary slightly from the actual

messages.

・Figures in this manual may be slightly simplified and may differ from the

actual product.

・Please notify us of any unclear points, mistakes or errors in this manual.

・Reproduction or use of any part or all of this manual is strictly forbidden.

・Please carefully read the guarantee and provisions for free repair.

・Microsoft and Windows are registered trademarks of Microsoft Corporation

USA and are binding in the USA and all other countries. Company names

and product names are trademarks or registered trademarks of each

company.

Safety Precautions

To ensure safe operation, please be sure to read, understand and follow the

contents of all such warnings.

DANGER

・This product has been designed for private or industrial use only.

・It is not for use in situations where strict safety precautions are necessary

such as in connection with medical equipment whether directly or indirectly.

・We are not responsible for any malfunction or trouble caused by the use

of our product or by any problem caused by the malfunction of our unit.

Please be fully aware of this before using our product.

・It is dangerous to swallow batteries. Store all batteries, sensors and Thermo

Recorder units out of the reach of children.

・Do not take apart, repair or modify the main unit. It may cause fire,

electrocution or damage. Please ask the shop where you bought the

product or T&D to carry out any repairs.

・Do not operate if the power cable is wet or with wet hands. It may cause

electrocution or failure.

・If water or a foreign object enters the case, immediately cease using it.

Continued use may cause ﬁre, electrocution or damage.

・Do not use in areas prone to heavy dust, smoke, steam or moisture; this

may cause failure.

Notices about Safe Operation

・This unit is not waterproof. Do not use in areas prone to splashing. This

may cause deletion of data, inaccurate readings, or other malfunctions. If

the unit becomes dirty, please wipe with an alcohol dampened clean cloth.

・Please be careful when using in overly hot or cold environments. Touching

the units may cause burns or frostbite.

・Do not drop the unit, place heavy weight on the unit nor expose the unit to a

strong impact. Doing so may cause damage to the unit.

・Battery life depends on the measurement environment, communication

frequency, recording interval and battery quality.

・Battery terminals may provide insufﬁcient contact due to age or vibration.

Please be careful not to lose data due to insufﬁcient contact.

・Remove batteries from any unit that is not to be used for a long period of

time. Batteries left in a unit not being used for a long time may leak and

cause a malfunction.

・Do not put your ﬁngers or foreign objects into the communication port.

・Do not use any AC Adapter other than the one provided for this unit.

・Using the software provided [Wireless for Windows] make sure to set up this

unit as a Base Unit, Remote Unit, or Relay Unit. It will not operate without

doing this.

・Neither the Base Unit nor a Relay Unit can measure or record data. Only

Remote Units can measure and record data.

・T&D accepts no responsibility for any damages or trouble in any form that

are directly or indirectly the results of using measurement taken with this

wireless data logger.

About TR-5320, the standard temperature sensors for RTR-71

・Use the sensors only within the measurable temperature range (-60 to

155℃).

・Please make sure that the external temperature sensor jacks are securely

inserted into the main unit.

・The sensor cable is coated with Teﬂon. The coating is thin and if scratched

or torn will cause a reduction in water resistance. Please check before

using.

・To ensure accurate measurements, make sure to insert the end of the

sensor at least 3 cm into the object or area.

・This sensor cannot be used with RTR-72.

About TR-3220, the standard temp./humidity sensor for RTR-72

・This sensor is not waterproof.

・Use the sensor only within the measurable temperature and humidity range

(Temperature: 0 to 50℃, Humidity: 10 to 95%RH)

・The unit may give an error in humidity value if there is a rapid change of

temperature. However, the value will return to normal after the sensor

temperature stabilizes.

・The temperature/humidity sensor cable cannot be extended.

・When the sensor is not used, put it in the attached plastic bag with a drying

agent and keep it in a cool, dark place at 5 to 25℃ and 30%RH or less.

・Please make sure that the external sensor jack is securely inserted into the

main unit.

・This sensor cannot be used with RTR-71.

Notices About Placement and Location

・A sudden change in widely different temperature environments may cause

condensation to occur. Please use the unit in areas with a temperature

range of 0 to 50℃ and a humidity range of 10 to 90%RH (without

condensation).

・Do not use, store or leave the unit in areas that are prone to direct sunlight

or extremely high temperature or humidity. If the unit's internal temperature

rises too high, it may cause ﬁre or other malfunctions to occur.

・Poisonous gases and chemicals may cause the unit to corrode. Also,

poisonous substances coming in contact with the unit may cause damage

or harm to people and animals. Please do not use the unit in environments

subject to or inﬂuenced by poisonous gases or chemicals.

・Direct vibrations from machinery may cause connections to be loosened

and subsequent malfunction. Please use in stable areas.

・Do not place in or near areas subject to strong magnetic forces.

Software User Agreement

Escape Clauses

T&D Corporation shall not guarantee the operation of Wireless for Windows.

2. T&D Corporation shall not accept any responsibility nor shall T&D become

involved in any claim reparation proceedings or compensate any claimant

for any damage whether direct or indirect that result from the usage of

Wireless for Windows.

3. Speciﬁcations of Wireless for Windows may be subject to change and

service may be terminated without advance notice to the user. In such a

case, T&D Corporation shall not be responsible nor shall T&D Corporation

become involved in any claim reparation proceedings or compensate any

claimant for any damages whether direct or indirect from the inability to use

Wireless for Windows.

4. T&D Corporation has no obligation to correct any defects found in Wireless

for Windows.

1. The copyright for Wireless for Windows, including the software and all

relevant documents belongs solely to T&D Corporation.

2. The reprinting or redistribution for commercial purposes whether in part or

whole, in magazines or as a part of any product is strictly forbidden without

the expressed consent of T&D Corporation. Any inquiries concerning

commercial redistribution should be directed to the Sales Department of

T&D Corporation.

3. Do not attempt to make any changes or modiﬁcations to Wireless for

Windows.

Table of Contents

Notices about this User's Manual ------------------------------------------------ 1

Safety Precautions -------------------------------------------------------------------- 2

Software User Agreement ---------------------------------------------------------- 5

Accessories Included ---------------------------------------------------------------- 8

Outline of Part Names ---------------------------------------------------------------- 9

■RTR-71 / RTR-72 Main Unit (Sold Separately) ------------------------- 9

■Sensors ----------------------------------------------------------------------------- 9

■Main Unit LCD Display --------------------------------------------------------10

Outline of Wireless Thermo Recorder RTR-71, RTR-72 ------------------11

■The System -----------------------------------------------------------------------11

■Software [Wireless for Windows] ----------------------------------------13

First Steps -------------------------------------------------------------------------------14

1. Installing Software --------------------------------------------------------------14

2. Installing the Battery ----------------------------------------------------------14

3. Connecting Main Unit to Computer ---------------------------------------15

Set up Program: From Registration to Positioning -----------------------16

1. Explanation of Display --------------------------------------------------------16

2. Communication Port Set up -------------------------------------------------17

3. Base Unit Registration --------------------------------------------------------18

4. Creating a Group ----------------------------------------------------------------19

5. Relay Unit Registration -------------------------------------------------------19

6. Remote Unit Registration ----------------------------------------------------21

7. Communication Test -----------------------------------------------------------23

8. Positioning the Units ----------------------------------------------------------25

Wireless for Windows Functions ------------------------------------------------27

1. Monitoring Current Temperature / Humidity ---------------------------27

2. Monitoring Warnings -----------------------------------------------------------28

3. Auto-Downloading --------------------------------------------------------------30

4. Manual Downloading ----------------------------------------------------------32

Changing Registrations and Settings -----------------------------------------35

1. Changing a Remote Unit Registration ----------------------------------35

2. Clearing a Registration -------------------------------------------------------36

Graph Tools Program ----------------------------------------------------------------38

1. Explanation of Display --------------------------------------------------------38

2. Opening a File --------------------------------------------------------------------39

3. Saving as Text File --------------------------------------------------------------41

4. Printing -----------------------------------------------------------------------------41

Data Maintenance Functions -----------------------------------------------------42

1. Calculation Range Settings -------------------------------------------------42

2. Edit Recording Conditions --------------------------------------------------43

3. Merging Channel Data ---------------------------------------------------------43

Troubleshooting -----------------------------------------------------------------------45

■Re-installing the software ---------------------------------------------------45

■Replacing Batteries ------------------------------------------------------------45

■About Temp / Humidity Sensor (TR-3220) -----------------------------46

■Error Messages -----------------------------------------------------------------47

■Other FAQ's ----------------------------------------------------------------------49

Product Speciﬁcations --------------------------------------------------------------53

Software Speciﬁcations for RTR-70 (Wireless for Windows) --------53

Optional Sensor Guide -------------------------------------------------------------54

Radio, EMC and Safety Regulations -------------------------------------------56

■Inquiries ------------------------------------------------------------------------------56

Warranty ---------------------------------------------------------------------------------57

Accessories Included

The ﬂowing items should be included in your product package. Before starting

please check to make sure everything has been included.

Communication Cable ×1

(RS-232C: D-sub9pin)

CD Rom ×1

(Wireless for Windows Set Up Disc)

Ver.2.10

for RTR-71 and RTR-72

DISC Ver.1.00

MS-Windows(R) 2000/Xp

MS-Windows(R) 98/Me

MS-WindowsNT(R) 4.0

AC Adapter (AD-0604)×1User's Manual ×1

Battery Change Plug ×1

*The battery change plug is necessary when you

replace the battery, so please make sure to keep it

in a safe place.

Do not use the battery change plug with any Thermo Recorders other than RTR-71 and

RTR-72.

Outline of Part Names

■RTR-71 / RTR-72 Main Unit (Sold Separately)

*Can be used as a Base Unit, Relay Unit, or a Remote Unit.

①Antenna

②Sensor Connection

③Battery Compartment

④ LCD Display

⑤Serial Communication Connection

⑥AC Adapter Connection

■Sensors

●TR-5320 ●TR-3220

①Thermistor

②Stainless Pipe (SUS316)

③Cable (Teﬂon Resin Coated)

④Connector

①Temp / Humidity Sensor

②Polypropylene Resin

③Cable (Vinyl Chloride Coated)

④Connector

Other manuals for RTR-71

This manual suits for next models

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual