Sungrow EMS3000 User manual
EMS3000Energy Management
SystemInstallation
ManualEMS3000-UEN-Ver11-
202207M-H-002571
Installation Manual
Energy Management System
EMS3000
EMS3000-UEN-Ver11-202207
I
All Rights Reserved
All Rights Reserved
No part of this document can be reproduced in any form or by any means without the prior
written permission of Sungrow Power Supply Co., Ltd (hereinafter "SUNGROW").
Trademarks
and other Sungrow trademarks used in this manual are owned by
SUNGROW.
All other trademarks or registered trademarks mentioned in this manual are owned by their
respective owners.
Software Licenses
• It is prohibited to use data contained in firmware or software developed by SUNGROW,
in part or in full, for commercial purposes by any means.
• It is prohibited to perform reverse engineering, cracking, or any other operations that
compromise the original program design of the software developed by SUNGROW.
II
About This Manual
This manual describes the transportation and storage, electrical connection, and
maintenance of the product.
Target Group
This manual is intended for persons who carry out operations such as mechanical
installation and electrical connection of product. The operator must be a suitably qualified
electrical technician.
All installation operations must and will only be carried out by qualified personnel. Qualified
personnel should have the following skills:
• Training for installation and commissioning of electrical system, as well as dealing with
hazards
• Knowledge of the manual and other related documents
• Knowledge of the local regulations and directives
How to Use This Manual
Read the manual and other related documents before performing any work on the product.
Documents must be stored carefully and be available at all times.
Contents may be periodically updated or revised due to the product development. The
manual content of subsequent versions of the product may be subject to change. The latest
manual can be found at support.sungrowpower.com .
Symbols
Important instructions contained in this manual should be followed during installation,
operation and maintenance of the product. They will be highlighted by the following symbols.
The symbols listed below may be used in this manual. Please read carefully to make better
use of this manual.
"Danger" indicates that there is a serious potential danger, which can lead to death
or serious injury if not avoided.
"Warning" indicates that there is a moderate potential danger, which may lead to
death or serious injury if not avoided.
"Caution" indicates that there is a mild potential danger, which may lead to
moderate or mild personal injury if not avoided.
III
"Attention" means that there is a potential risk, which may cause the equipment to
fail to operate normally or cause property damage if not avoided.
"Notes" are the additional information in the manual, which emphasize and
supplement the contents, and may also provide skills or tips for optimizing the use
of the product, and help the user solve a problem or save time.
Symbol on Products
Please pay attention to the danger and warning signs on the product, including the
following:
Marks Mark description
This mark indicates that the body contains high voltage, and
touching it may cause electric shock.
This symbol indicates a protective ground terminal which needs to
be firmly grounded to ensure the safety of operators.
Note
In order to provide customers with the best usage experience, the product and product
manual are always in the process of improvement and upgrade. If the manual received is
slightly inconsistent with the product, it may be a result of product version upgrade, and the
actual product shall prevail.
The diagrams in this manual are for reference only. The actual product received may differ.
V
Contents
All Rights Reserved .....................................................................................................I
About This Manual......................................................................................................II
1 Safety Instructions ............................................................................................1
1.1 Before Installation...........................................................................................1
1.2 During Installation...........................................................................................1
1.3 Maintenance and Replacement .......................................................................2
2 Product Description ..........................................................................................3
2.1 System Introduction........................................................................................3
2.1.1 Function introduction.............................................................................3
2.1.2 Communication Schematic Diagram.......................................................3
2.1.3 Performance characteristics...................................................................4
2.2 Appearance and Structure...............................................................................5
2.3 Overall Dimensions ........................................................................................5
3 Transport and Storage .....................................................................................7
3.1 Scope of Supply .............................................................................................7
3.2 Transport .......................................................................................................7
3.2.1 Mechanical Transport ............................................................................7
3.2.2 Manual Transport..................................................................................9
3.3 Storage..........................................................................................................9
4 Mechanical Mounting .....................................................................................10
4.1 Requirements for installation environment ......................................................10
4.2 Floor Requirements ...................................................................................... 11
4.3 Installation Methods...................................................................................... 11
5 Electrical Connection .....................................................................................13
5.1 Internal Layout .............................................................................................13
5.2 Preparation before Wiring .............................................................................13
5.3 Electrical Wiring ...........................................................................................14
5.3.1 Grounding Connection.........................................................................14
5.3.2 Ethernet Port Connection.....................................................................16
5.3.3 Optical Fibre (Optional)........................................................................17
5.3.4 Connection to External Power Supply ...................................................17
VI
5.3.5 UPS Wiring (optional) ..........................................................................18
5.4 Closing the Cable Entry.................................................................................19
6 Routine Maintenance .....................................................................................20
7 Appendix ..........................................................................................................21
7.1 Basic parameters .........................................................................................21
7.2 Quality Assurance ........................................................................................22
7.3 Contact Information ......................................................................................23
1
1Safety Instructions
The product is designed and tested in accordance with international safety requirements.
However, it is a power electronic product, relevant safety instructions should be strictly
followed in the process of installation, operation and maintenance.
Incorrect use or misoperation may harm:
• Life and personal safety of the operator or third parties
• The product, other property of the operator or third parties
Please read the descriptions of the "danger", "warning", "caution", "attention" and "notes"
carefully, which will provide certain protection for the personal safety of users and help
prolong the service life of the product.
1.1 Before Installation
• When receiving the product, please first check whether the product was
damaged during transportation. If you find any problems, please contact
Sungrow Power Supply Co., Ltd. or the carrier immediately.
• Relevant operators must be familiar with all safety instructions and rules on
installation, operation and maintenance in the manual before using the product.
• Correct handling, in-place installation, operation and maintenance are reliable
guarantees for safe and reasonable use of the product.
1.2 During Installation
The product can only be used for the purposes specified in the manual.
Unauthorized modification or use of spare parts not sold or recommended by
Sungrow may lead to fire, electric shock and other damage or injuries.
2
1.3 Maintenance and Replacement
• Maintenance of the product can only be carried out by Sungrow's service
department or qualified professionals.
• Users are prohibited from repairing and maintaining the equipment, or
replacing modules by themselves. If users request for repair, maintenance or
module replacement, analysis and confirmation by Sungrow Power Supply Co.,
Ltd. are required.
If relevant parts need to be replaced during maintenance, please use the
components and parts recommended and approved by Sungrow, otherwise the
user should bear the losses caused thereby!
1 Safety Instructions Installation Manual
Table of contents
Other Sungrow Measuring Instrument manuals
