StarVedia IC737w User manual

All-in-one

Mega-pixel Pan/tilt

IP Network Camera

User Manual

Revision: 030402

Date: 2013/01/02

For firmware version v030402

Mega-pixel Pan/Tilt IP Camera

Table of Contents

1. INTRODUCTION..........................................................................................................................6

2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................8

2.1. MAJOR HARDWARE COMPONENTS.......................................................................................8

2.2. QUICK INSTALLATION AND USAGE ......................................................................................10

2.3. WIRELESS CONNECTION (IF ROUTER/AP HAS WPS BUTTON)..........................................15

2.4. WIRELESS CONNECTION (IF WPS NOT SUPPORTED ON ROUTER/AP)..............................15

2.5. PUSH NOTIFICATION ............................................................................................................16

3.1. INFORMATION ......................................................................................................................19

3.2. VIDEO DISPLAY ...................................................................................................................20

3.3. NETWORK............................................................................................................................22

3.4. WIFI SECURITY....................................................................................................................24

3.5. ADVANCED NETWORK.........................................................................................................26

3.6. VIDEO SETTINGS.................................................................................................................27

3.7. MOBILE VIDEO SETTINGS....................................................................................................29

3.8. NIGHT MODE CONTROL .......................................................................................................30

3.9. EMAIL/FTP ALARM ...............................................................................................................31

3.10. SPEAKER ALARM SETTINGS ...............................................................................................34

3.11. NAS SETTINGS....................................................................................................................35

3.12. SD-CARD SETTINGS ...........................................................................................................37

3.13. INFRARED THERMOMETER ..................................................................................................39

3.14. SCHEDULING .......................................................................................................................40

3.15. LED DISPLAY CONTROL......................................................................................................42

3.16. DATE/TIME...........................................................................................................................43

3.17. ADMIN..................................................................................................................................44

3.18. UPGRADE ............................................................................................................................45

3.19. REBOOT...............................................................................................................................46

3.20. SET TO FACTORY DEFAULT..................................................................................................47

4. FEATURES AND SPECIFICATIONS......................................................................................48

4.1. FEATURES ...........................................................................................................................48

4.2. SPECIFICATIONS..................................................................................................................49

5. PACKAGE CONTENTS............................................................................................................52

APPENDIX A. LIST OF TESTED NAT/ROUTER DEVICES........................................................53

APPENDIX B. MAXIMUM ALLOWED VIDEO USERS.................................................................54

Mega-pixel Pan/Tilt IP Camera

APPENDIX C. PERFORMANCE INFORMATION .........................................................................55

APPENDIX D. TROUBLE SHOOTING............................................................................................57

APPENDIX F. SNAPSHOT PICTURE ON ANY BROWSER .......................................................60

Mega-pixel Pan/Tilt IP Camera

List of Figures and Tables

Figure 2-1: Major components in the front panel

Figure 2-2: Major components in the back panel

Figure 2-3: IP CAM connection diagram.

Figure 2-4: Connect Ethernet cable to a switch/router.

Figure 2-5: The installation CD disk

Figure 2-6: The ID/Password card

Figure 2-7: Running window of CamView program

Figure 2-8: Pop-up play-video password window

Figure 2-9: Unplug the Ethernet cable to enable the WiFi function

Figure 3-1: Open the web configuration page from CamView software

Figure 3-2: IP CAM Web configuration login page

Figure 3-3: IP CAM Information page

Figure 3-4: Video display page

Figure 3-5: Network settings page for DHCP function

Figure 3-6: Network settings page for fixed IP address

Figure 3-7: WiFi security disabled page

Figure 3-8: WiFi security enabled page

Figure 3-9: WiFi testing page

Figure 3-10: Advanced network settings page

Figure 3-11: Video settings page

Figure 3-12: 3GPP/RTSP enabled page

Figure 3-13: Email/FTPAlarm page

Figure 3-14: SMTP server settings page

Figure 3-15: D/O Settings page

Figure 3-16: NAS Storage settings page

Figure 3-17: SD-Card settings page

Figure 3-18: SD-Card information page

Figure 3-19: Infrared thermometer settings page

Figure 3-20: Schedule Management page

Figure 3-21: Led Control settings page

Figure 3-22: System date/time settings page

Figure 3-23: Admin settings page

Figure 3-24: Firmware upgrade settings page

Figure 3-25: Firmware upgrade status page

Figure 3-26: System reboot settings page

Figure 3-27: System reboot under-going page

Mega-pixel Pan/Tilt IP Camera

Figure 3-28: Safe mode information page

Figure 3-29: Stick the reset button to set to the factory default

Figure 5-1: The IP camera body

Figure 5-2: Power Adaptor

Figure 5-3: Quick installation guide

Figure 5-4: Ethernet cable

Figure 5-5: Installation CD

Figure 5-6: ID/Password Card

Table A-1: List of tested Wireless AP/router devices

Table A-2: List of tested Wired NAT/router devices

Mega-pixel Pan/Tilt IP Camera

1. Introduction

The IP Camera is designed for all day video surveillance on your iPhone/iPad

and Android mobiles/pads. The setup is truly 1-2-3 :

1. Connect the camera to the network

2. Download the app mCamView into your iPhone/iPad or Android

3. View video by the camera ID/password

The push notification is supported, so that you will get the notification from your

iPhone/iPad and Android once there is any events detected through the PIR body

sensor or sound detector on the camera, even when your mobile is on sleep mode.

The pan/tilt functions allow the mobile user to pan./tilt the camera through a

finger move on the mobile screen. You could monitor the whole room with a single

camera.

The SD card recording is supported, and you could playback the recorded video

on your iPhone/iPad and Android. You could also do the SD card recording only when

there is PIR or sound detection to save the SD card storage size. The PIR and sound

detected recording has a 5 seconds pre-recording, so that you will always catch the

critical moment.

For day & night usage, there are two video sensors/lens on the camera, one for

day and one for night. The day lens and night lens focus are separately tuned for day

light and Infra Red light for best video quality. No ICR, no mechanical problem.

Two-way audio is supported. You can monitor the synchronized video/audio and

talk to or warn the people around the camera from your iPhone/iPad and Android once

you got the push notification. There is a built-in speaker and a speaker jack is

provided so that you could connect any high power speaker to the camera for your

needs.

The WPS(WiFi Protected Setup) is supported. You could set up the WiFi

connection of the camera with the router by clicking the WPS button on the camera

and on the router at the same time. No more complicated WiFi configuration.

An infrared thermometer is provided. You could monitor the temperature of the

Mega-pixel Pan/Tilt IP Camera

environment of the camera. And you could setup the camera to trigger alarm when the

environment temperature is out of a specified range.

The IP camera is ideal for securing small businesses, home offices and

residences. The IP Camera is a perfect replacement of the alarm system and baby

monitor in your house and shop. .

The differences

It’s very easy to see the video of the Pan/Tilt IP Camera, you only need to key in

the ID/Password of the IP CAM any where in the world, you do not need to remember

the IP address or domain name or DDNS name or port number. And you do not need

to modify the settings(like port mapping, fixed IP, DDNS, virtual server) of the

NAT/router devices, it’s just a plug & play usage.

So, the differences are the followings:

Public IP address needed ? No

Dynamic DNS needed ? No

Port mapping in router? No

Virtual server in router ? No

UPnP support in router ? No

What’s needed ? ID and Password

Mega-pixel Pan/Tilt IP Camera

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the

major components of the IP CAM products.

2.1. Major hardware components.

The major components on the front panel of the IP CAM products are the

followings :

1. Lens – the lens is inside the mask and the focus of the lens is fixed, you do not

need to spend time to adjust the focus, the effective focus range is from 30cm to

infinity.

2. IR LED – there are two IR LEDs for the night mode usage.

3. PIR – passive infrared sensor for body detection

4. Microphone – for receiving the audio/voice. Effective distance is about 5 meters.

5. Thermometer – for measuring the environment temperature and alarm if out of

some temperature range.

6. Status indication LED (red) – this LED is to indicate the Internet connection status.

When the Internet connection is connected, the LED will be constant red light. If

there is any Internet connection problem, the LED will be blinking red light.

7. Ethernet indication LED (blue) – this LED is to indicate if the Ethernet link is ok

and packet traffic is sending/receiving. When the Ethernet cable is connected, the

LED is constant blue light. When there is packet sending/receiving, the LED is

blinking blue light.

8. SD card LED – for the indication of the SD card activity( recording ).

9. Micro-SD card slot – for inserting the micro SD-Card. (support up to 32G bytes)

10. Internal speaker – there is an internal speaker inside.

11. External speaker jack – for connecting external speaker.

12. WPS button – for the setup of the WiFi connection with WPS function.

13. Light detector – for switching between day time and night time automatically.

Mega-pixel Pan/Tilt IP Camera

Figure 2-1: Major components in the front panel

The major components on the back panel and bottom of the IP CAM products are

the followings:

1. Bracket screw jack – this is the position to screw in the bracket of the IP CAM.

With the bracket, you can put the IP CAM on the desk, on the wall or on the ceiling.

(Bracket not provided)

2. Power jack – this is the place to plug in the power adaptor. The power needed for

this IP CAM is 12V/1.0A, please make sure you are using the correct power

adaptor.

3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the

Ethernet link is ok, the Ethernet indication LED on the front side will be blue light.

4. Reset button – this is the button to reset the IP CAM to default factory settings.

You need to use a small stick like pencil or tooth stick to press the reset button for

more than 3 seconds to enable the reset function. Usually when you forgot the

administrator account, you will probably need to do this reset action to reset to the

default factory settings. Please refer to section 3.19 for more details.

5. Wall mount – this is the place to hang the IP CAM on the ceiling or on the wall.

6. Antenna – this is the 802/11 n wireless antenna.

Mega-pixel Pan/Tilt IP Camera

Figure 2-2: Major components in the back panel

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home/office network.

2. Install the CamView/app software on the notebook/PC/mobiles.

3. Key in the ID/password of the IP CAM(from the ID/Password card) on the

CamView, and then you can see the video.

First, Connect the IP CAM to the home/office network

Please connect the IP CAM accessaries to the IP CAM body correctly, including the

power adapter and Ethernet cable, as shown in Figure 2-3. And connect the other end

of the Ethernet cable to the home network or office network. Usually, this Ethernet

cable is plugged into a home NAT/router device or an Ethernet switch if in the office,

as shown in Figure 2-4. Since the default settings of the IP CAM use DHCP function

and very often there is a DHCP server on most of the Home/office network, the IP

CAM should be connected to the Internet immediately. The Internet status LED is

constant red light to indicate this good connection status. If the LED is blinking, please

refer to section 3.3~3.5 to try other network settings.

Table of contents

Other StarVedia IP Camera manuals

StarVedia

StarVedia IC212 User manual

StarVedia

StarVedia 802.11 n User manual

StarVedia

StarVedia IC602 User manual

StarVedia

StarVedia 802.11 n User manual

StarVedia

StarVedia IC717z User manual

Popular IP Camera manuals by other brands

FLIR

FLIR Exx series user manual

Avigilon

Avigilon H4A-BO1-IR installation guide

Digital Watchdog

Digital Watchdog DWCA-C128-64 manual

ShareTech

ShareTech AV1 user manual

Ezviz

Ezviz C6C quick start guide

Melchioni

Melchioni UCAM 2015 manual

Geutebruck

Geutebruck G-Cam/ESD-4630 quick guide

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG installation manual

Mitel

Mitel 6800i Series Administrator's guide

Vitek

Vitek VTC-IR403-212NP quick start guide

THOMSON

THOMSON DSC - 323W user guide

AVer

AVer FB2027 user manual

ENFORCER

ENFORCER EV-T5105-N2SQ manual

Wansview

Wansview NC543 user manual

Eneo

Eneo MCB-64A0003M0A Quick installation guide

deView electronics

deView electronics CBDNI36F instruction manual

Swann

Swann SwannEye user manual

LevelOne

LevelOne IP CamSecure user manual