Spot-on LW600PRO User manual
Spot-On Digital/Laser RangeFinder 600
Operating Instructions
Feature：
21mm Objective Lens
6x Magnification Power
7.2°View Angle
16mm Pupil Distance
Precision To +/-1 M
Maximum Range :
LW600PRO 600M
LW1000PRO 1000M
Closest distance :
LW600PRO 4M
LW1000PRO 5M
3V Battery (CR2)
Waterproof
Size:
L：97mm(dose not include eyepiece)
106mm（include eyepiece）
W：39mm
H：73mm（front）
68mm（rear）
Weight: 175g
1. The boot
Press key to boot.
2. Unit conversion
Long press button to switch the unit of distance, Y and M.
Internal Screen
Side of the screen
The area of imperial units
The height of imperial units
3.Low voltage alarm
When the the products battery voltage is too low, the low pattern has
been shown to remind replace the battery.
Battery Replacement indicate:
4.Mode Selection
Press key in the "ranging", "Rectangular area & Rectangular
perimeter", "Circular area & Circumference", "Rectangular area &
Rectangular perimeter with angle correction" ，"Circular area
&Circumference with angle correction "，" Horizontal distance "，"
Vertical height " and "Tilt angle" switch between.
4-1.“Ranging ” mode
Principle:
Press key to boot.
Internal Screen
Side of the screen
Press key to start ranging.
Internal Screen
Side of the screen
Within a distance of 200 m resolution 0.5m.
4-2. Rectangular area & Rectangular perimeter
Principle:
Measuring the length of two sides of the rectangle, calculate the area
and perimeter of a rectangle.
Internal Screen
Side of the screen
Press key
Measure the length of a side.
Internal Screen
Side of the screen
Press key
Measure the length of another side
Rectangular area
Rectangular perimeter
4-3. Circular area & Circumference
Principle:
By measuring the diameter of the circle, calculate the area and
perimeter of a circle.
Internal Screen
Side of the screen
Press key
Measure the diameter
Circular area
Circumference
4-4. Rectangular area & Rectangular perimeter with angle correction
Principle:
Measuring the length of two sides of the rectangle, calculate the area
and perimeter of a rectangle.
Tilt angle will be involved in the calculation.
Internal Screen
Side of the screen
Press key
Measure the length of a side and tilt.
Internal Screen
This manual suits for next models
1
Table of contents
Other Spot-on Measuring Instrument manuals
Spot-on
Spot-on TDR User manual
Spot-on
Spot-on MEGA FLOW METER User manual
Spot-on
Spot-on General A3 PRO User manual
Spot-on
Spot-on SC-5 User manual
Spot-on
Spot-on 29360 User manual
Spot-on
Spot-on General Titanium Series User manual
Spot-on
Spot-on PT-100 User manual
Spot-on
Spot-on 39240 User manual
Spot-on
Spot-on 35650 User manual
