Socomec COUNTIS ATv2 User manual

Industrial Switching & Protection Systems

COUNTIS ATv2/ATiv2

Operating instructions

2SOCOMEC - Ref. : 875 645 D

SOCOMEC - Ref. : 875 645 D 3

ENGLISH

Contents

PRELIMINARY OPERATIONS ___________________ 4

GENERAL INFORMATION ______________________ 4

PRESENTATION _______________________________ 4

INSTALLATION ________________________________ 5

CONFIGURATION ______________________________ 7

TECHNICAL CHARACTERISTICS _______________ 8

4SOCOMEC - Ref. : 875 645 D

• the product has not been damaged

during transit,

• the product reference number con-

forms to your order,

• the package contains the product as

well as the operating instructions.

For personnel and product safety

please read the contents of these

operating instructions carefully.

Check the following points as soon as

you receive the package:

• the packing is in good condition,

PRELIMINARY OPERATIONS

GENERAL INFORMATIONS

PRESENTATION

The COUNTIS System comprises

energy metering products for balanced

or non-balanced 3- or 4-wire network.

This system comprises two products:

• ATv2: a non-insulated three-phase

active energy-meter, which does not

allow earthing CT of secondary.

• ATiv2: a three-phase insulated single

or double rate active energy meter

allowing the CT secondary to be

earthed.

These products are completely conﬁ-

gurable (CT radio, network type and

pulse output value) and have a 7-digit

display which allows direct display of

consumption in kWh. They are equip-

ped with a pulse output as standard.

COUNT 105 A

akWh display

bTotal and partial meter display, or scrolling parameter settings

cFlashing LED consumption indicator (10 Wh/pulse)

dValidation/scrolling of parameter settings

COUNTIS ATv2 / ATiv2 SINGLE RATE

SOCOMEC - Ref. : 875 645 D 5

ENGLISH

CLIMATIC ENVIRONMENT

To guarantee optimum operation, it is

recommended that this device is used

between - 5 to + 45 °C with a relative

humidity of between 20 and 85%.

Note:

The COUNTIS can be installed on a

DIN EN 50022 rail (DIN 43880).

CONNECTION

The Countis ATv2 and ATiv2 consist of

connection terminals of 1 to 6 mm2for

currents and voltages.

Recommendation:

• Avoid close proximity with systems

generating electromagnetic distur-

bances

• Avoid vibrations including accelera-

tions of more than 1 G for frequen-

cies lower than 60 Hz.

SAFETY INSTRUCTIONS (U,I, F)

To avoid damaging the device, take

care to observe the following before

connecting the device:

• indications on the casing,

• network frequency: 50 or 60 Hz,

• maximum permanent voltage at

voltage input terminals of 400 V AC

±20%phase/phase,

• maximum permanent current of 7 A

(connection from current transfor-

mer(s)).

Note:

The minimum torque for the fixed

terminal is 0.8 Nm.

Recommendation:

We recommend that the auxiliary

voltage and the voltage inputs should

be protected with 0.5 A fuses or

BS 88 2A gG.

INSTALLATION

PRESENTATION (continued)

COUNT 119 B

akWh display

bTotal and partial meter display, or scrolling parameter settings

cDisplays t1 and t2 rate meters

dFlashing LED consumption indicator (10 Wh/pulse)

eValidation/scrolling of parameter settings

COUNTIS ATiv2 DOUBLE RATE

6SOCOMEC - Ref. : 875 645 D

NETWORK

CT earthing, for the ATiv2 only

Note:

If the current is badly connected or

there is poor current/voltage corres-

pondence (negative energy) the coun-

ter will be stopped and the arrows t

ﬂash.

3 WIRE WITH 1 CT (3 BL) 4 WIRE WITH 1 CT (4 BL)

3 WIRE WITH 2 CT (3 NBL) 3 WIRE WITH 2 CT (3 NBL)

3 WIRE WITH 3 CT (3 NBL) 4 WIRE WITH 3 CT (4 NBL)

TWO-PHASE (2 BL) SINGLE-PHASE (1 BL)

Key to diagrams:

1 Fuses 0.5 gG or BS 88 2A gG

L3P1

ATiv2

L3P1

ATiv2

COUNT 106 C

COUNT 107 C

COUNT 108 C

COUNT 109 C

COUNT 110 C

ATiv2

COUNT 112 C

ATiv2

COUNT 118 C COUNT 111 C

INSTALLATION (continued)

COUNT 35B GB

COUNT 147A

CONNECTING PULSE OUTPUT

External counter 1

External power supply

RATE INPUT (t1 / t2)

t1 = 0 VAC

t2 = 230 VAC

The neutral has to be

connected for the dual

tarif ATiv2.

SOCOMEC - Ref. : 875 645 D 7

ENGLISH

CONFIGURATION

KEY INSTRUCTION

For 3 seconds to access

access-code entry (CdE).

Note:

The device will automatically leave

the configuration menu if no buttons

are pressed for a period of 25

seconds.

Note:

Press the t button for a prolonged

period to scroll rapidly through the

configuration screens. Press for a

short period to scroll through each

screen one-by-one.

Note:

A long press on the button tcauses

rapid scrolling and a single short

press causes scrolling in steps of 5.

Note:

The values available depend on the

Ct ratio.

To enter code 21.

To validate the code and access to

the network programming (nET).

To select the network type, 1bL

(single phase), 2bL (two-phase),

3-4 nbL (unbalanced three-phase)

and 3-4 bL (balanced three-phase).

To validate the network programming

and go on to the current transformer

(CT) primary value.

To programme the primary value up

to 6000 A.

To validate the unit programming and

go on to the pulse output (PuLSES).

To go on to the weight of this output

(VAL).

To select the weight “0.1” for

0.1 kWh, “1” for 1 kWh, “10” for

10 kWh, “100” for 100 kWh.

To validate the programming of this

weight and go on to the pulse

duration (dur).

To select the duration from 60 to

900 ms.

To accept value and pass to partial

meter zero reset (rSET).

To select ‘rSEt nO’ (no reset to zero)

and ‘rSEt YES’ (reset to zero).

To conﬁrm reset to zero and return to

network type programming.

To conﬁrm and quit programming.

8SOCOMEC - Ref. : 875 645 D

TECHNICAL CHARACTERISTICS

ENCLOSURE

Connection via 1 to 6 mm2terminal shrouds

Weight 300 g

Size modular: 4 modules of 17.5 mm

Protection class (front) IP40

FRONT PANEL

Green LCD/7 digits

Digit height 8 x 4 mm

INPUTS

CURRENT

Via transformer with

• conﬁgurable primary 5 to 6000 A

• secondary 5 A

Input consumption 10 mA to 7 A (secondary)

Consumption ≤1 VA

TENSION

Measurement range (Line/Line) 230 V AC - 15% to 400 V AC + 20%

Consumption ≤0,5 VA

AUXILIARY POWER SUPPLY

Type auto-powered

Consumption ≤1 VA

ACCURACY

Accuracy index IEC 61036 class 1

PULSE OUTPUT

Reed relay (100 V DC - 0.5 A - 12 VA)

Pulse duration 60 to 900 ms

Maximum tripping number 5 x 107at 10 V DC/10 mA

OPERATING CONDITIONS

Operating temperature - 5 °C up to 45 °C

Storage temperature - 20 °C up to 70 °C

Relative humidity 85%

STANDARDS

CE marking IEC 61000-4/2-3-4-5-6-8-11

EN 50081-1

EN 50082-2

Operating conditions IEC 60068-2-6

IEC 60068-2-11

IEC 60068-2-30

Note:

The current inputs are insulated on

the ATiv2.

Note:

The Countis ATv2 and ATiv2 are auto-

powered from the V1 et V2 voltage

inputs.

SOCOMEC - Ref. : 875 645 D 9

ENGLISH

SOCOMEC - Ref.: 875 645 D - 10/03

COUNT 113 C

HEAD OFFICE

SOCOMEC GROUP

Switchgear and UPS

S.A. capital de 11 052 200 €

R.C. Strasbourg 5484500 149 B

SOCOMEC

1, rue de Westhouse - B.P. 10

F-67235 Benfeld Cedex -FRANCE

Tel. +33 (0)3 88 57 41 41 - Fax +33 (0)3 88 57 78 78

SOCOMEC

95, rue Pierre Grange

F-94132 Fontenay-sous-Bois Cedex-FRANCE

Tel. +33 (0)1 45 14 63 40 - Fax +33 (0)1 48 77 31 12

[email protected]

SALES MANAGEMENT DIVISION

Industrial Switching & Protection Systems

This document is not contractual. SOCOMEC reserves the right to

modify features without prior notice in view of continued improvements.

www.socomec.com

This manual suits for next models

Table of contents

Other socomec Measuring Instrument manuals

socomec

socomec COUNTIS E27 User manual

socomec

socomec COUNTIS E41 User manual

socomec

socomec CCS WattNode BACnet WNC-3Y-208-BN User manual

socomec

socomec DIRIS A40 User manual

socomec

socomec COUMIS E27 User manual

socomec

socomec DIRIS A-30 User manual

socomec

socomec COUNTIS E15 User manual

socomec

socomec Continental Control Systems MCM MB Series User manual

socomec

socomec COUNTIS M03 User manual

socomec

socomec ISOM AS425 User manual

socomec

socomec DIRIS A20 User manual

socomec

socomec DIRIS A20 User manual

socomec

socomec COUNTIS E44R User manual

socomec

socomec COUNTIS E13 User manual

socomec

socomec DIRIS Digiware S User manual

socomec

socomec DIRIS A40 User manual

socomec

socomec COUNTIS M43 User manual

socomec

socomec DIRIS A14 User manual

socomec

socomec COUNTIS E25 User manual

socomec

socomec DIRIS Digiware DC User manual

socomec

socomec COUNTIS E43 User manual

socomec

socomec ISOM K-20 User manual

socomec

socomec COUNTIS E05 User manual

socomec

socomec COUNTIS E33 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual

socomec COUNTIS ATv2 User manual

Popular Measuring Instrument manuals by other brands