SKF TKRT 10 User manual

Instructions for use

Mode d’emploi

Bedienungsanleitung

Instrucciones de uso

Manuale d’istruzioni

Instruções de uso

}ÿƳn

Инструкция по эксплуатации

SKF TKRT 10

English 3

Français 11

Deutsch 19

Español 27

Italiano 35

Português 43

oç51

Русский 59

3SKF TKRT 10

Table of contents

EC Declaration of conformity ................................................................. 4

Safety recommendations....................................................................... 4

UK Declaration of Conformity ................................................................ 5

1. General features ............................................................................. 6

2. Technical data................................................................................. 6

3. Operation ...................................................................................... 8

4. Functions description ..................................................................... 8

5. Non-contact measurements particularities.................................... 10

Original instructions

4SKF TKRT 10

EU Declaration of Conformity

TKRT 10

We, SKF MPT, Meidoornkade 14, 3992 AE Houten, The Netherlands herewith

declare under our sole responsibility that the products described in these

instructions for use, are in accordance with the conditions of the following

Directive(s):

EMC DIRECTIVE 2014/30/EU

RoHS DIRECTIVE (EU) 2015/863

and are in conformity with the following standards:

EN 61 326-1:2013, EN 61 326-2-1:2013,

EN 61 326-1:2012, EN 61 326-2-1:2012.

The laser is classiﬁed in accordance with the EU norm EN 60 825-1:2014

Houten, The Netherlands, September 2022

Guillaume Dubois

Manager Quality and Compliance

Safety recommendations

• Always read and follow the operating instructions for use.

• Always wear safety goggles when using the tachometer.

• Never stare directly into the laser source.

• Never open the instrument and attempt to adjust the output of

the laser.

• Remove the battery when the instrument is not in use for an

extended period.

• All repair work should be taken care of by an SKF repair shop.

5SKF TKRT 10

UK Declaration of Conformity

TKRT 10

We, SKF MPT, Meidoornkade 14, 3992 AE Houten, The Netherlands herewith

declare under our sole responsibility that the products described in these

instructions for use, are in accordance with the conditions of the following

Directive(s):

Electromagnetic Compatibility Regulations 2016 (2016 No. 1091)

The Restriction of the Use of Certain Hazardous Substances in Electrical and

Electronic Equipment Regulations 2012 (2012 No. 3032)

and are in conformity with the following standards:

EN 61 326-1:2013, EN 61 326-2-1:2013,

EN 61 326-1:2012, EN 61 326-2-1:2012.

The laser is classiﬁed in accordance with the EU norm EN 60 825-1:2014

The person authorised to compile the technical documentation on behalf

of the manufacturer is SKF (U.K.) Limited, 2 Canada Close, Banbury,

Oxfordshire, OX16 2RT, GBR.

Houten, The Netherlands, September 2022

Guillaume Dubois

Manager Quality and Compliance

6SKF TKRT 10

1. General features

The SKF laser tachometer set TKRT 10 features a large LCD backlit display

that gives excellent visibility in most applications.

It provides fast and accurate Contact and Non-Contact rotational and surface

speed measurements of rotating objects.

It is supplied with 3x contact adaptors

for rpm and linear speed contact

applications.

Other features include 10 memories,

Maximum and Minimum and Average

speed modes.

2. Technical data

General

Display 5 digit LCD backlit display

Displayed resolution 0,1 r/min up to 10 000 r/min,

otherwise 1 r/min

Memory 10 readings memories

Low battery indicator Yes

Auto switch off After 15 seconds

Measurement

Optical modes r/min, hertz

Contact modes r/min, metres, inches, yards, feet, per min, hertz

Count modes Total revs, metres, feet, yards

Sampling time 0,5 seconds (over 120 r/min)

Linear speed 0,2 to 1 500 metres/min (4 500 ft/min)

7SKF TKRT 10

Optical measurement

Rotational speed range 3 to 99 999 r/min

Accuracy ±0,05% of reading ±1 digit

Measuring distance 50 to 500 mm (1.9 to 19.7 in)

Angle of operation ±45°

Laser sensor 1 × built-in class 2 laser

Contact measurement

Rotational speed range 2 to 20 000 r/min

Accuracy ±1% of reading ±1 digit

Contact adaptors Included with conical tip,

conical recess and wheel

Battery and power

Battery 1 × 9 V alkaline type IEC 6F22

Operation time 12 hours continuous use

Additional power source 6 V DC charging port

(charger not included)

Size and weight

Product dimensions 160 × 60 × 42 mm

(6.3 × 2.4 × 1.7 in)

Product weight 160 g (0.35 lbs)

Carrying Case

dimensions 260 × 85 × 180 mm

(10.3 × 3.4 × 7.0 in)

Total weight

(incl. case) 680 g

(1.5 lbs)

Operating requirements

Operating temperature 0 to 50 °C (32 to 122 °F)

Storage temperature –10 to +50 °C (14 to 122 °F)

Relative humidity 10 to 90% RH non-condensing

IP rating IP 40

8SKF TKRT 10

Case contents

1 × SKF Tachometer TKRT 10

1 × set of 3 × contact adaptors

1 × 9 V battery

1 × set of reﬂective tape

1 × printed instructions for use

Spare part

TKRT-RTAPE Reﬂective tape

TDTC 1/A General toolcase without inlay, size A

3. Operation

• Open the battery compartment cover and install a 9V Battery.

• Non-Contact:

Attach the self-adhesive reﬂective tape on the object whose rotational

speed is to be measured. The reﬂective tape should be placed as close to

the outer edge of the object to be measured as possible.

• Contact:

Select the contact tip the most suited to the application and connect it to

the tachometer using the contact adapter provided.

• Press the “MEAS” button. Point the laser spot at the object or bring

the contact probe to the object .

Read the measurement on the LCD display.

4. Functions description

In scan mode, the current measurement is displayed on the main display.

The main display will hold the last values until the tachometer automatically

turns off after 15 seconds.

Measurement Modes:

There are two measurement groups:

• Turn the instrument On by pressing the “MEAS” button.

• Press the “MODE” button to browse through the following modes:

RPM, rPm, HZ, M/M, I/M, F/M, Y/M.

• Press and hold the “MODE” button for 3 seconds to switch to the next

measurement group.

• Press the “MODE” button once to browse through the following modes:

REV, M, In, FT, Yd.

Other manuals for TKRT 10

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual