Siemens Simatic S7-300 User manual

Preface, Contents

General Technical Specifications 1

Power Supply Modules 2

Digital Modules 3

Analog Modules 4

Special Signal Modules 5

Interface Modules 6

RS 485 Repeater 7

SIMATIC TOP Connect and

SIMATIC TOP Connect TPA 8

Appendices

Parameter Sets for

Signal Modules A

Diagnostics Data of

Signal Modules B

Dimension Drawings C

Spare Parts and Accessories

for S7-300 Modules D

Guidelines for Handling Electro-

static Sensitive Devices (ESD) E

List of Abbreviations F

Glossary, Index

Edition 02/2004

A5E00105505-03

Programmable Logic

Controllers S7-300

Module Data

Reference Manual

SIMATIC

This manual is part of the documentation package

with the order numbers:

Programmable Controller S7-300:

6ES7398-8FA10-8BA0

ET 200M Distributed I/O Device:

6ES7153-1AA00-8BA0

The following supplement is part of this documentation:

No. Designation Drawing number Edition

1Product information A5E00201782-02 02/2004

!Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions

are not taken.

!Warning

indicates that death, severe personal injury or substantial property damage can result if proper

precautions are not taken.

!Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are

defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

!Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers which

have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks

SIMATIC, SIMATIC HMIand SIMATIC NETare registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks

might infringe upon the rights of the trademark owners.

Safety Guidelines

This manual contains notices intended to ensure personal safety, as well as to protect the products and

connected equipment against damage. These notices are highlighted by the symbols shown below and

graded according to severity by the following texts:

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are

welcomed.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or

design, are reserved.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D- 90327 Nuernberg

Siemens AG 2004

Technical data subject to change.

Siemens Aktiengesellschaft A5E00105505-03

iii

Programmable Logic Controllers S7-300 Module Data

A5E00105505-03

Preface

Purpose of the manual

The information contained in this manual will enable you to look up operator

actions, function descriptions and the technical specifications of the signal

modules, power supply modules and interface modules of the S7-300.

How to configure, assemble and wire these modules in an S7-300 or ET 200M

system is described in the installation manuals for each system.

Required basic knowledge

To understand this manual, it is necessary to have a general knowledge of

automation and programmable logic controllers.

Scope of this manual

The present documentation package contains reference manuals for all the

modules current at the time the manuals were published.

We reserve the right to enclose a product information leaflet containing up-to-date

information on the module with new modules and modules with a new product

version.

Changes compared with the previous version

Compared to the previous version, of the “Module Data” reference manual, the

following chapters and appendices have been thoroughly revised and new modules

added, as necessary:

•Preface

•Chapter 1 “General Technical Specifications”

•Chapter 3 “Digital Modules”,

•Chapter 4 “Analog Modules”

•Appendix A “Signal Module Parameter Sets”

•Glossary

Note: The previous version of this “Module Data” reference manual can be

recognized by the number in the footer: A5E00105505-02.

The current number is: A5E00105505-03.

Preface

iv ProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

Approbations

Refer to Section 1.1 Standards and approvals.

CE Approval

Refer to Section 1.1 Standards and approvals.

Identification for Australia (C-Tick-Mark)

Refer to Section 1.1 Standards and approvals.

Standards

Refer to Section 1.1 Standards and approvals.

Preface

ProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

How the manual fits in

S7-300

Manual

•CPU 31xC and CPU 31x, Technical Data

Description of operation, functions and

technical specifications of the CPU.

Reference Manual

•CPU Data: CPU 312 IFM – 318-2 DP

Description of operation, functions and

technical specifications of the CPU.

Operating Manual

•S7-300, CPU 31xC and CPU 31x: Installation

Description of configuration, installation,

wiring, networking and commissioning of an

S7-300.

Installation manual

•Automation system S7-300, installation: CPU 312

IFM – 318-2 DP

Description of configuration, installation,

wiring, networking and commissioning of an

S7-300.

Manual

•CPU 31xC: Technological Functions

•Examples

Description of the individual technological

functions: Positioning, counting, point–to–point

coupling, control.

The CD contains examples for the

technological functions.

Module data reference manual

You are reading this manual

•Reference Manual→

Descriptions of functions and technical

specifications of signal modules, power

supply modules and interface modules.

Instruction List

•CPU 312 IFM – 318-2 DP

•CPU 31xC and CPU 31x

The instruction set lists of the CPUs and their

execution times.

A list of executable blocks (OBs/SFCs/SFBs)

and their execution times.

Getting Started

•CPU 31x: Commissioning

•CPU 31xC: Commissioning

•CPU 31xC: Positioning with analog output

•CPU 314C: Positioning with digital output

•CPU 31xC: Counting

•CPU 31xC: Rules

•CPU 31xC: Point-to-point connection

•CPU 317-2 PN/DP: Configuration of the PROFInet

interface X2

Getting Started documents use a concrete

example to guide you through the individual

commissioning steps until you have a

functioning application.

Preface

vi ProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

ET 200M

Distributed Peripheral manual

•Manual Description of configuration, assembly,

wiring.

Signal modules for process automation reference

manual

•Reference Manual

Description of use in process automation,

parameterization with SIMATIC PDM, digital

input modules, digital output modules.

Module data reference manual

You are reading this manual

•Reference Manual→Descriptions of functions and technical

specifications of signal modules, power

supply modules and interface

modules.

Navigation

To help you find special information quickly, the manual contains the following

access aids:

•At the start of the manual you will find a complete table of contents and a list of

the diagrams and tables that appear in the manual.

•An overview of the contents of each section is provided in the left column on

each page of each chapter.

•You will find a glossary in the appendix at the end of the manual. The glossary

contains definitions of the main technical terms used in the manual.

•At the end of the manual you will find a comprehensive index which gives you

fast access to the information you need.

Recycling and disposal

Because of its low-emission equipment, it is possible to recycle the S7-300. For

ecologically harmless recycling and disposal of your old device, contact a

certificated disposal service for electronic scrap.

Preface

vii

ProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

Additional support

Please contact your local Siemens representative if you have any queries about

the products described in this manual.

http://www.ad.siemens.com/automation/partner

Training center

We offer a range of relevant courses to help you to get started with the SIMATIC

S7 programmable controller. Please contact your local training center or the central

training center in Nuremberg, D 90327 Germany.

Phone: +49 (911) 895-3200.

Internet: http://www.sitrain.com

Preface

viii ProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

A&D Technical Support

Worldwide, available 24 hours a day:

Johnson City

Nuernberg

Beijing

Technical Support

Worldwide (Nuernberg)

Technical Support

24 hours a day, 365 days a year

Phone: +49 (180) 5050-222

Fax: +49 (180) 5050-223

E-Mail: adsupport@

siemens.com

GMT: +1:00

Europe / Africa (Nuernberg)

Authorization

Local time: Mon.-Fri.

8:00 AM to 5:00 PM

Phone: +49 (180) 5050–222

Fax: +49 (180) 5050-223

E-Mail: adsupport@

siemens.com

GMT: +1:00

United States (Johnson City)

Technical Support and

Authorization

Local time: Mon.-Fri.

8:00 AM to 500 PM

Phone: +1 (423) 262 2522

Fax: +1 (423) 262 2289

E-Mail: simatic.hotline@

sea.siemens.com

GMT: –5:00

Asia / Australia (Beijing)

Technical Support and

Authorization

Local time: Mon.-Fri.

8:00 AM to 5:00 PM

Phone: +86 10 64 75 75 75

Fax: +86 10 64 74 74 74

E-Mail: adsupport.asia@

siemens.com

GMT: +8:00

The languages of the SIMATIC Hotlines and the authorization hotline are generally German and English.

Preface

Programmable Logic Controllers S7-300 Module Data

A5E00105505-03

Service & Support on the Internet

In addition to our documentation, we offer our Know-how online on the internet at:

http://www.siemens.com/automation/service&support

where you will find the following:

•The newsletter, which constantly provides you with up–to–date information on

your products.

•The right documents via our Search function in Service & Support.

•A forum, where users and experts from all over the world exchange their

experiences.

•Your local representative for Automation & Drives.

•Information on field service, repairs, spare parts and more under “Services”.

Preface

xProgrammableLogic Controllers S7-300 Module Data

A5E00105505-03

Other manuals for Simatic S7-300

Table of contents

Other Siemens Controllers manuals

Siemens

Siemens LME7 Series Operator's manual

Siemens

Siemens SKP Series Owner's manual

Siemens

Siemens SQM50.484R8A Owner's manual

Siemens

Siemens GEB 1 Series User manual

Siemens

Siemens Climatix POL822 User manual

Siemens

Siemens OpenAir GCA Series Owner's manual

Siemens

Siemens DESIGO PX Series User manual

Siemens

Siemens RAJA+ 3TE7131-1HC14-1A Operating instructions

Siemens

Siemens SIRIUS 3RM10 Series User manual

Siemens

Siemens GPC 1A Series User manual

Siemens

Siemens PS 307 6ES7307-1BA01-0AA0 User manual

Siemens

Siemens DXR2.E10PL-102BK User manual

Siemens

Siemens GED33 Series User manual

Siemens

Siemens Powermite 599 MT Series Owner's manual

Siemens

Siemens 1PL622 User manual

Siemens

Siemens ST950 User manual

Siemens

Siemens SIDS-T40026-00-4AUS User manual

Siemens

Siemens PXC00-U User manual

Siemens

Siemens RAJA+ 3TE7111-2SC18-1A Series Operating instructions

Siemens

Siemens RMH760 User manual

Siemens

Siemens Simatic S7-1500 Instruction sheet

Siemens

Siemens N 512/21 User manual

Siemens

Siemens 27086-TAB Owner's manual

Siemens

Siemens SIMATIC S7-200 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide