Siemens Simatic S7-1500 User manual

SIMATIC Drive Controller

SIMATIC

SIMATIC Drive Controller

Equipment Manual

11/2019

A5E46600370

-AA

Preface

SIMATIC Drive Controller

Documentation Guide

Product overview

Connecting

Interrupts, diagnostics

alarms, error messages and

system alarms

Technical specifications

Dimension drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E46600370-AA

Ⓟ

11/2019 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury mayresult if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 3

Preface

Purpose of the documentation

This equipment manual supplements the system manual of the SIMATIC Drive Controller

family of controllers. It contains a concise description of the SIMATIC Drive Controller

hardware and, in addition to the product overview, includes information on:

●Interfaces

●Wiring diagrams

●Display and operator controls

●Technical specifications

In the SIMATIC Drive Controller system manual, you will find information on configuring,

installing, wiring and commissioning the SIMATIC Drive Controller, among other things.

All cross-system functions, such as motion control and communication functions, are

described in the function manuals.

The information provided in this manual and the system manual enables you to commission

the SIMATIC Drive Controller.

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Also take note of information labeled as follows:

Note

A note contains important information on the product described in the

documentation, on the

handling of the product or on the section of the documentation to which particular attention

should be paid.

Preface

SIMATIC Drive Controller

4Equipment Manual, 11/2019, A5E46600370-AA

Special information

Note

Important note for maintaining the operational safety of your system

Systems with safety

-oriented variants are subject to special operational safety requirements

on the part of the operator. The supplier is also obliged to comply with special product

monitoring measures. For this

reason, we inform you in personal notifications about product

developments and features that are (or could be) relevant to the operation of systems from a

safety perspective.

By subscribing to the corresponding notifications, you will ensure that you are

always up-to-

date and able to make changes to your system when necess

ary.

-click on "email on

update":

SIMATIC S7

-1500/SIMATIC S7-1500F

(

https://support.industry.siemens.com/cs/ww/en/ps/13716)

Distributed I/O (

https://support.industry.siemens.com/cs/ww/en/ps/14029)

STEP 7 (TIA Portal) (

https://support.industry.siemens.com/cs/ww/en/ps/14667)

SINAMICS S120 (

https://support.industry.siemens.com/cs/ww/en/ps/13231)

SINAMICS Startdrive (

https://support.industry.siemens.com/cs/ww/en/ps/13438)

Operator control and monitoring systems

(

https://support.industry.siemens.com/cs/ww/en/ps/14729)

Industrial Communication (

https://support.industry.siemens.com/cs/ww/en/ps/15247)

Safety systems

– Safety Integrated

(

https://support.industry.siemens.com/cs/ww/en/ps/19902)

Note

When using F

-CPUs in safety mode and fail-safe modules, observe the description of the F-

system in SIMATIC Safety

- Configuring and Programming

(

https://support.industry.siemens.com/cs/ww/en/view/54110126).

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Preface

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 5

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Siemens Industry Online Support

You can find current information on the following topics quickly and easily here:

●Product support

All the information and extensive know-how on your product, technical specifications,

FAQs, certificates, downloads, and manuals.

●Application examples

Tools and examples to solve your automation tasks – as well as function blocks,

performance information and videos.

●Services

Information about Industry Services, Field Services, Technical Support, spare parts and

training offers.

●Forums

For answers and solutions concerning automation technology.

●mySupport

Your personal working area in Industry Online Support for messages, support queries,

and configurable documents.

This information is provided by the Siemens Industry Online Support in the Internet

(https://support.industry.siemens.com).

Preface

SIMATIC Drive Controller

6Equipment Manual, 11/2019, A5E46600370-AA

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on the Internet

(https://mall.industry.siemens.com) and in the Information and Download Center

(https://www.siemens.com/automation/infocenter).

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 7

Table of contents

Preface ................................................................................................................................................... 3

1 SIMATIC Drive Controller Documentation Guide ..................................................................................... 9

2 Product overview .................................................................................................................................. 11

2.1 Application range ....................................................................................................................11

2.1.1 SIMATIC Drive Controller .......................................................................................................11

2.2 Components and functionality ................................................................................................16

2.3 Hardware properties ...............................................................................................................20

2.4 Firmware functions of the CPU...............................................................................................24

2.5 Firmware functions of SINAMICS Integrated..........................................................................30

2.6 Operator controls, displays and connection elements............................................................32

2.6.1 View of SIMATIC Drive Controller with front covers ...............................................................32

2.6.2 View of SIMATIC Drive Controller without front covers ..........................................................33

2.6.3 Top view of SIMATIC Drive Controller....................................................................................34

2.6.4 View of the SIMATIC Drive Controller from below..................................................................35

2.6.5 Front covers ............................................................................................................................36

2.6.6 Nameplates.............................................................................................................................38

2.7 Mode selector .........................................................................................................................41

2.8 FUNCT button.........................................................................................................................42

3 Connecting ........................................................................................................................................... 43

3.1 Supply voltage X124 ...............................................................................................................43

3.2 PROFINET X150, X160 and X130 .........................................................................................46

3.3 PROFIBUS X126 ....................................................................................................................49

3.4 Digital inputs and outputs of X122, X132 and X142 ...............................................................50

3.5 DRIVE-CLiQ interfaces X100 to X103....................................................................................56

3.6 Wiring and block diagrams .....................................................................................................57

3.6.1 SIMATIC Drive Controller block diagram................................................................................57

3.6.2 Onboard digital inputs/digital outputs of X122, X132 and X142 .............................................58

3.6.3 DRIVE-CLiQ interfaces X100 to X103 ....................................................................................59

Table of contents

SIMATIC Drive Controller

8Equipment Manual, 11/2019, A5E46600370-AA

4 Interrupts, diagnostics alarms, error messages and system alarms ....................................................... 61

4.1 Status and error displays ....................................................................................................... 61

4.1.1 Overview ................................................................................................................................ 61

4.1.2 Status and error display of the CPU ...................................................................................... 63

4.1.3 Status and error display of SINAMICS Integrated ................................................................. 65

4.1.4 ACT LED and interface LEDs ................................................................................................ 66

4.1.5 7-segment display .................................................................................................................. 68

4.2 Interrupts, diagnostics and system messages....................................................................... 69

4.2.1 Interrupts, diagnostics and system messages....................................................................... 69

5 Technical specifications ........................................................................................................................ 70

A Dimension drawing ............................................................................................................................... 88

SIMATIC Drive Controller

Equipment Manual, 11/2019, A5E46600370-AA 9

SIMATIC Drive Controller Documentation Guide

The documentation for the SIMATIC Drive Controller is divided into three areas. This

arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC Drive Controller. The STEP 7 online help supports

you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, interfaces, wiring diagrams, display and operator control elements and technical

specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

Drive Controller and SIMATIC S7-1500 automation system, such as diagnostics,

communication, Motion Control, Web server and OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/68052815).

Other manuals for Simatic S7-1500

Table of contents

Other Siemens Controllers manuals

Siemens

Siemens Ertec 400 User manual

Siemens

Siemens GED33 Series User manual

Siemens

Siemens PXC00-U User manual

Siemens

Siemens RDU340 Series Operator's manual

Siemens

Siemens N 501 Service manual

Siemens

Siemens SINAMICS S120 User guide

Siemens

Siemens SSD31 Series User manual

Siemens

Siemens SAS61.33U Owner's manual

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens 3TW20 User manual

Siemens

Siemens SIRIUS 3RA2110 Series User manual

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens OpenAir GBB13 1 Series User manual

Siemens

Siemens LMV37.4 Series Operator's manual

Siemens

Siemens Micromaster Profibus User manual

Siemens

Siemens RMH760 User manual

Siemens

Siemens Powermite 599 Series Owner's manual

Siemens

Siemens SIMATIC S7 User guide

Siemens

Siemens SIRIUS SC 3RF29 0-0HA Series User manual

Siemens

Siemens RUGGEDCOM WIN5123 User manual

Siemens

Siemens 7SR224 User manual

Siemens

Siemens SIRIUS 3RW40 User manual

Siemens

Siemens SIMATIC S5-95F User manual

Siemens

Siemens LCM-OAVS 570-804PA User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide