Siemens Simatic S7-1500 User manual

SIMATIC

S7-1500/ET 200MP

Technology Module TM NPU

Equipment Manual

09/2020

A5E46384784

-AA

Introduction

Security information

Product overview

Wiring

Configuration / address

space

Programming

Diagnostics

Technical specifications

Parameter data record 128

Dimension drawing

Interlock of the TM NPU

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E46384784-AA

Ⓟ

09/2020 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Technology Module TM NPU

Equipment Manual, 09/2020, A5E46384784-AA 3

Table of contents

1 Introduction........................................................................................................................................... 4

1.1 Open Source Software ......................................................................................................... 4

2 Security information.............................................................................................................................. 5

2.1 Security information ............................................................................................................ 5

3 Product overview................................................................................................................................... 6

3.1 S7-1500 / ET 200MP Documentation Guide .......................................................................... 6

3.2 Properties............................................................................................................................ 8

3.3 Operator controls and display elements.............................................................................. 10

3.4 Functions .......................................................................................................................... 11

4 Wiring .................................................................................................................................................. 13

4.1 Terminal assignment ......................................................................................................... 13

4.2 Block diagram.................................................................................................................... 16

5 Configuration / address space ............................................................................................................. 17

5.1 Configuration of the TM NPU ............................................................................................. 17

5.2 Address space and address assignment .............................................................................. 18

6 Programming....................................................................................................................................... 20

7 Diagnostics .......................................................................................................................................... 21

7.1 Status and error displays.................................................................................................... 21

7.2 Diagnostics alarms............................................................................................................. 23

8 Technical specifications....................................................................................................................... 25

A Parameter data record 128 .................................................................................................................. 28

B Dimension drawing ............................................................................................................................. 30

C Interlock of the TM NPU....................................................................................................................... 32

Technology Module TM NPU

4Equipment Manual, 09/2020, A5E46384784-AA

Introduction

Purpose of the documentation

This manual supplements the system manual S7-1500, ET 200MP automation system

(https://support.industry.siemens.com/cs/ww/en/view/59191792). Functions that generally

relate to the system are described in this manual.

The information provided in this manual and in the system/function manuals support you in

commissioning the system.

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product, on the handling of the product and on

the section of the documentation to which particular attention should be paid.

1.1 Open Source Software

Open-source software is used in the firmware of the module. Open Source Software is

provided free of charge. We are liable for the product described, including the open-source

software contained in it, pursuant to the conditions applicable to the product. Siemens

accepts no liability for the use of the open source software over and above the intended

program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

(https://support.industry.siemens.com/cs/ww/en/view/109765637).

Technology Module TM NPU

Equipment Manual, 09/2020, A5E46384784-AA 5

Security information

2.1 Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Technology Module TM NPU

6Equipment Manual, 09/2020, A5E46384784-AA

Product overview

3.1 S7-1500 / ET 200MP Documentation Guide

The documentation for the SIMATIC S7-1500 automation system and the SIMATIC ET 200MP

distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

Product overview

3.1 S7-1500 / ET 200MP Documentation Guide

Technology Module TM NPU

Equipment Manual, 09/2020, A5E46384784-AA 7

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

S7-1500 and ET 200MP systems, e.g. diagnostics, communication, motion control, Web

server, OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/68052815).

Manual Collection S7-1500/ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86140384).

SIMATIC S7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86630375).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/cs/ww/en/ps/ae).

Product overview

3.2 Properties

Technology Module TM NPU

8Equipment Manual, 09/2020, A5E46384784-AA

3.2 Properties

Article number

6ES7556-1AA00-0AB0

View of the module

Figure 3-1 View of the TM NPU technology module

Technical properties

•Processing of neural networks

•Processing of data from connected sensors

•Processing data from the user program

•Data exchange between CPU and TM NPU via process image

•USB 3.1 port, type A

•Gigabit Ethernet IO connection via RJ45 bus connector (metal)

Other manuals for Simatic S7-1500

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens Simatic S7-300 User manual

Siemens

Siemens SPCN110 User manual

Siemens

Siemens LEC1/8853 User manual

Siemens

Siemens SIMATIC FM 350-2 User manual

Siemens

Siemens SINAMICS S120 Technical Document

Siemens

Siemens SIMATIC ET 200S User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SIRIUS 3RT1.4 User manual

Siemens

Siemens SIMATIC ET 200SP Technical Document

Siemens

Siemens SINUMERIK 802D sl User manual

Siemens

Siemens FC1008-A Manual

Siemens

Siemens IM 155-6 PN ST User manual

Siemens

Siemens SINAMICS S120 Quick start guide

Siemens

Siemens SiPass Driver User manual

Siemens

Siemens RUGGEDCOM RS400 User manual

Siemens

Siemens SINAMICS S110 Datasheet

Siemens

Siemens SIMATIC NET RUGGEDCOM APE1808 Instruction sheet

Siemens

Siemens GAMMA instabus Touch control TC5 User manual

Siemens

Siemens SINAMICS G120P CU230P-2 Administrator guide

Siemens

Siemens SINAMIC G130 User manual

Siemens

Siemens SINAMICS DCM User manual

Siemens

Siemens SIROTEC Technical manual

Siemens

Siemens WFZ43 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual