Siemens FDCI723 User manual

A6V10402143_f_en_-- Building Technologies

2018

Control Products and Systems

Cerberus™ PRO

Zone module, external powered

FDCI723

Zone module, external powered, addressed for detector line C

NET.

●Detector line (collective or conventional 110 series, DS11, SynoLINE300/600)

●LED indicator for detector line status: fault, test, etc.

●Two-wire installation for all cable types

●DC 24 V power supply, external, tested to EN 54-4 (detector lines electrically

isolated)

●Microprocessor-controlled signal processing

●Communication via C-NET (addressed individually)

●Can be used in dry, dusty, and humid areas

●Different mounting options

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Properties

Eco-friendly

●Environmentally friendly processing

●Reusable materials

●Electronic parts and synthetic materials can be easily separated

Features

●Transparent housing, ensuring that LED indicators are easy to see

●Protected electronics

●Integrated line separator

●Easy mounting using snap fastener

●Can be used in dry areas

●Housing FDCH221 can be used in dusty and humid environments.

Use

For connecting to collective or conventional fire detectors (with safety barrier SB3 for areas

at risk of explosion).

1 Connections for the C-NET detector line 4 Detector line input connections

Max. 32 detectors per line

2 C-NET detector line 5 Contact input

3 External supply DC 24 V 6 Jumper for activation/deactivation of

ground fault monitoring

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

NOTICE

Country

specific safety regulations

Failure to observe country-specific safety regulations can cause injury to persons and

damage to property.

●Observe country-specific regulations and comply with the corresponding safety

directives.

Functions

The detector line parameters can be set for:

●Collective detector line 110 series, DS11, SynoLINE600

●Conventional detector line SynoLINE300

●Collective detector line DS11, Ex with safety barrier SB3

Detector line is monitored for:

●Quiet, alarm, open line, short-circuit, fault, and ground fault

Status display by means of LED.

Type Overview

Type Designation Order no. Weight [kg]

FDCI723 Zone module, external powered S54322-F6-A1 0.106

Accessories

Type Designation Order no. Weight [kg]

FDCH221 Housing with cover, seal, and screws S54312-F3-A1 0.282

– Metal cable gland M20 x 1.5 A5Q00004478 0.036

– M20 metal counter nut A5Q00004479 0.006

FDCM291 Mounting foot A5Q00003855 0.001

DBZ1190-AB 0.5...2.5 mm2(3-pin) connection terminal BPZ:4942340001 0.001

Product documentation

Document ID Name

A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)

A6V10414910 Technical manual Zone module, external powered FDCI723

001204 Principles, applications, installation, maintenance Fire alarm signal in areas at risk of

explosion

Related documents such as the environmental declarations, CE declarations, etc., can be

downloaded from the following Internet address:

https://siemens.com/bt/download

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Notes

Mounting

●Mounting on U-rail TS35 (series mounting)

●In housing FDCH221 with cover, seal, and screws

1 Series mounting using mounting feet supplied, on U-rail TS35

2 Mounting in separate housing FDCH221 (accessory)

3 Use auxiliary terminals DBZ1190-AB (accessory) for shielded cables

Disposal

The device is considered an electronic device for disposal in accordance

with the European Guidelines and may not be disposed of as domestic

garbage.

●Dispose of the device through channels provided for this purpose.

●Comply with all local and currently applicable laws and regulations.

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Technical data

FDCI723

C-NET operating voltage DC 12…33 V

External power supply

●Operating voltage

Tested to EN 54-4

DC 18...32 V

Collective detector line

●Collective line code (KLK)

●End-of-line (EOL)

20 V voltage reference diode or EOL22 (Ex)

Operating temperature -20...+55 °C

Storage temperature -30...+70 °C

Air humidity, non-condensing ≤95 % rel.

Communication protocol C-NET

Pluggable connection terminals 0.2…1.5 mm2

Color

●Input/output module rack, back box

●Cover cap, housing cover

~RAL 9010, pure white

Transparent matt

EN 60529 / IEC 60529 protection category

●Without housing

●With housing FDCH221

IP30

IP65

Standards EN 54-17, EN 54-18

Approvals

●VdS

●LPCB

G215004

Compatibility See 'List of compatibility'

Building Technologies A6V10402143_f_en_--

Fire Safety 2018-10-03

Issued by

Siemens Switzerland Ltd

Building Technologies Division

International Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724 2424

www.siemens.com/buildingtechnologies

Technical specifications and availability subject to change without notice.

Document ID A6V10402143_f_en_--

Edition 2018-10-03

Dimensional drawings

Zone module, external powered FDCI723

102

Housing FDCH221

119

0786

Siemens Schweiz AG, Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

A6V10414910

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

FDCI723 - Input/output device incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-17 / EN 54-18 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-21423; DoC No.: CED-FDCI723

FDCI723

This manual suits for next models

Other Siemens Control Unit manuals

Siemens

Siemens SIMATIC ET 200S User manual

Siemens

Siemens HLIM User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens AP 641 Service manual

Siemens

Siemens SINAMICS V60 User manual

Siemens

Siemens SINUMERIK 840Di sl User manual

Siemens

Siemens SINAMICS G130 User manual

Siemens

Siemens SIPLUS CMS4000 IFN VIB-A User manual

Siemens

Siemens FS-TRI-M User manual

Siemens

Siemens VN2001-A1 User manual

Siemens

Siemens Simatic TI405 User manual

Siemens

Siemens SIMATIC CPU 410 User guide

Siemens

Siemens SIMATIC NET RUGGEDCOM APE1808 Instruction sheet

Siemens

Siemens VKF46 Series User manual

Siemens

Siemens WF 723 C Operating instructions

Siemens

Siemens SINUMERIK 828D Turning Parts list manual

Siemens

Siemens EFB300 User manual

Siemens

Siemens RDM-MXL User manual

Siemens

Siemens SINAMICS G120D User manual

Siemens

Siemens VVI46 /2 Series User manual

Siemens

Siemens SIMOTION D410 PN User manual

Siemens

Siemens SIJECT 16i User manual

Siemens

Siemens SIMOCODE DP User manual

Siemens

Siemens SIMOCODE pro User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual