shumatt CRT061 User manual
Shenzhen Shumatt Technology Co., Ltd
0
Universal common rail built-in injector
fix and oil collection kit Instruction
manual
Shenzhen shumatt Technology Co., Ltd.
Shenzhen Shumatt Technology Co., Ltd
PRODUCT NAME：
Universal Common Rail Built-in
Injector Fix and Oil Collection Kit
Model：CRT061
Write：张严巍
Version：
Date：2016.10.26
Shenzhen Shumatt Technology Co., Ltd
1
Universal Common Rail Built-in
Injector Fix and Oil Collection Kit
------CRT060
COPYRIGHT NOTICE
Shenzhen shumatt Technology Co., Ltd .and its partner
companies issued jointly issued including but not limited to
product or copyrighted content and services, etc. all
intellectual property rights, protected by law. Without our
written permission, any units and individuals shall not in any
way or reason to these products, services, information, and
any part of the material will be used, reproduced, modified,
copied, transmitted, or bundled with other products use, sale,
where violations the copyright and other intellectual property
rights, the company will pursue its legal responsibility
according to law.
CONTACT
Shenzhen: shumatt Technology Co., Ltd.
Add: 4th floor Noble Plaza NO269 Qian Jin road Bao An
District Shenzhen China
TEL: +86-755-23215133
Web: www.shumatt.net
Cell phone: +86-13410541523 Technical
support:[email protected]om
1.INTRODUCTION
Universal Common Rail Built-in injector fix And Oil
Collection Kit is applicable for connections of all built-in
common rail injectors. especially for BOSCH, DELPHI,
DENSON. You can test its injection and return oil.
1.1 Product List
No.
Name
Qty
Note
①
Oil Return Holder
2
②
Sealing Cap
4
③
Oil Inlet Holder
2
④
Oil Catcher
4
⑤
Coil Head Spare Parts
4
⑥
Elastic Valve Spare Parts
4
⑦
Sealing Ring
12
1.2 Product Parts
①
②
③
④
⑤
⑥
⑦
Shenzhen Shumatt Technology Co., Ltd
2
1.3 Product Details
1.4 Step
1. Mount the screw on the oil return device
2. Tighten the screw with wrench and fix the Injector
3. Connect the sealing ring to the oil return device
4. Fix the sealing ring part to the oil return hole
5. Mount the sealing ring on the injector
Shenzhen Shumatt Technology Co., Ltd
3
6. Mount the catcher on injector and tighten the elastic
valve
1.5 Specifications
Specification
Length
21cm
Volume
3024 cm³
Width
18 cm
Weight
1800 g
Height
8 cm
Note
Packing Parameters
Length
22.5 cm
Volume
4168.13 cm³
Width
19.5 cm
Weight
2300 g
Height
9.5 cm
Note
2 .SAFETY INFORMATION
(1) Non-professionals are not allowed to disassemble and
repair the equipment.
(2) This tool should avoid contact with children, to avoid
danger, if a child swallows small parts, please rushed to the
hospital immediately for treatment.
(3) Avoid products under high temperature operation;
avoid squeezing, to avoid danger.
(4) Do not throw, down or stepping on the device, to avoid the
risk of the holder by a strong external impact occurs.
(5) Do not insert foreign objects into the connector portion
of the holder.
(6) In connection, pay attention to thread alignment,
there is no alignment cannot be forced to install.
3. SALE STATEMENT
(1) Products and components warranty period of three
months, the warranty period for the first time from the
product purchase date (to purchase formal credentials
date) starting time of purchase date to purchase the
product warranty registration card, whichever date;
(2) Provides free product debugging and testing. To obtain
warranty service, you can contact directly with the seller or
an authorized service agency can also call our telephone
service, contact us by our service personnel placement
services.
4. DISCLAIMER
If Products exist the following conditions, warranties and
service under this document will not apply:
(1) The product or component has exceeded the warranty
period;
(2) Failure or damage caused by the operation, not in
accordance with the instructions for use;
(3) The use of the device or replace the original equipment
malfunction or damage caused when removable parts;
(4) Because of unexpected factors or human factors
(including operational errors, scratches, handling, bump,
improper voltage caused by fault or damage.
(5) Failure or damage due to force majeure or accidents
caused;
(6) The other is not our equipment (including components)
quality problems caused by failure or damage;
Shenzhen Shumatt Technology Co., Ltd
4
Note: Information object to change without prior separate
notice, please refer to the company website
announcement. As you encounter this situation, you
should find a solution to the responsible party, Shenzhen
shumatt Technology Co., Ltd. does not assume any
responsibility.
5. PRODUCT MAINTENANCE
(1) When cleaning, use a damp cloth, cleaning treatment
with neutral detergent, and then wipe dry water stains.
(2) Severe surface stains, scratches, burns fireworks, you
can use fine sandpaper (400-500) light grinding surface,
and then use scouring cloth wipe dry.
(3) Avoid contact with acid, brine and other corrosive
substances.
(4)To keep clean, the use of careless caused surface water
stains, use a cloth to dry, keep the surface dry.
6. CERTIFICATE
Certificate
Product name：Universal common rail built-in injector
fix and oil collection kit
Model number：CRT060
Manufacture date：
inspectors：
7. WARRANTY CARD
Maintenance record form(filled by service personnel for
maintenance)
Repair time
Filure
phenomenon
Failure cause
Replacemnt cause
Signature
This manual suits for next models
1
Table of contents
Other shumatt Measuring Instrument manuals
