SEWOO LK-P43 User manual
P43Ⅱ(Peeler) ENG Rev. C 01 / 2021
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do ,18103, Republic of Korea
+82-31-8077-5000 / +82-31-624-5310 / http://www.miniprinter.com
All specications are subject to change without notice
USER�S MANUAL / Peeler
the user that changes or modications not expressly approved by the J. STEPHEN
Lab., Ltd.responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The responsible party for Supplier's Declaration of Conformity must be located
within the United States, so you have to include following information in manual.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
26188 Edewecht, Holljestr.9 | Germany
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronics
equipment. For more detailed information about recycling of this product,
please contact your local city oce, your household waste disposal service
or the shop where you purchased the product.
1. Safety Precautions 2
2. Unpacking 4
3. Product Overview 5
4. Setting Up the Product 6
4-1. Display 6
4-2. Installing the Battery 7
4-3. Removing the Battery 8
4-4. Charging the Battery 9
4-5. Battery Charger Usage (Optional) 10
4-6. Car Charger Usage (Optional) 11
4-7. Belt Clip Usage 12
4-8. Interface Cap Installation 13
4-9. Paper Roll Installation 14
4-10. Install / Uninstall the External Paper Guides 16
4-11. Peel Mode 18
4-12. Shoulder Strap Installation (Optional) 20
4-13. Diagnostic Test 21
5. Peripheral Connection 23
5-1. Bluetooth Connection (Optional) 23
5-2. Wi-Fi Connection (Optional) 23
5-3. Interface Cable Connection 24
6. Cleaning the Printer 25
6-1. Print-Head Cleaning 25
6-2. Platen Roller Cleaning 26
7. Printer Specication 27
8. Utilities 29
9. S/W 30
2
For better safety and reliability, adhere to the following precautionary measures.
Read and follow the instructions carefully before operation of the product.
Prohibition Must follow
Do not disassemble
Unplug the power from the
outlet
Grounding to prevent
electric shock
Do not handle the product with
wet hands
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
Potential risk of
electric shock or re
Potential risk of
electric shock or re
Potential risk of
electric shock or re
Potential risk of
electric shock or re
3
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
Turn o the power
using the power
button
Potential risk of
malfunction, electric
shock, or re. When
the product needs to
be repaired, please
contact your reseller
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
May cause
damage or injury
Potential risk of re
or unit malfunction
Potential risk of re
or unit malfunction
Potential risk of
re or property
damage
4
Printer Battery Belt Clip AC Cord
Adaptor USB Cable Serial Cable Roll Paper
Quick Manual CD
ERROR
FULLEMPTYERROR
FULLEMPTY
ERROR
FULLEMPTYERROR
FULLEMPTY
Battery Cradle
(Charging Cradle)
4BC-XX
(Charging Cradle) Car Adapter Shoulder Strap
5
SERIAL
Display
PEELER BODY
Cover Open Button
USB
PEELER WING
Charger Connector
Belt Clip Connector
Battery Shoulder Strap Ring
Other manuals for LK-P43
3
Table of contents
Other SEWOO Printer manuals
SEWOO
SEWOO SLK-T32EB II User manual
SEWOO
SEWOO WTP-150 User manual
SEWOO
SEWOO LK-P400 User manual
SEWOO
SEWOO LK-P41W User manual
SEWOO
SEWOO LK-P12B User manual
SEWOO
SEWOO SLK-T12EB User manual
SEWOO
SEWOO SLK-TL122 User manual
SEWOO
SEWOO SLK-TS400 Instruction Manual
SEWOO
SEWOO LK-P31 User manual
SEWOO
SEWOO LUKHAN LK-P21B User manual
SEWOO
SEWOO SLK-TE25 User manual
SEWOO
SEWOO LK-P30 Installation instructions
SEWOO
SEWOO LK-T12 User manual
SEWOO
SEWOO LK-P11B User manual
SEWOO
SEWOO SLK-TE21X Series User manual
SEWOO
SEWOO WTP-150 User manual
SEWOO
SEWOO LUKHAN LK-P21B User manual
SEWOO
SEWOO SLK-TL122 User manual
SEWOO
SEWOO LK-P43 User manual
SEWOO
SEWOO LK-P25 User manual
