SEWOO SLK-TE25 User manual
Aroot Co., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea
TEL : +82-31-8077-5000 / FAX : +82-31-624-5310
http://www.miniprinter.com
TE25 ENG Rev C 02/2022
All specications are subject to change without notice
MODEL : SLK-TE25
Receipt Printer User’s Manual
Vic Barczyk
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
NA_Sales@miniprinter.com
Victor Almazan
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
LA_Sales@miniprinter.com
Yan xiao rui
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
sales@miniprinter.com
Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronics equipment. For more detailed information about recycling of this product, please contact your
local city oce, your household waste disposal service or the shop where you purchased the product.
2
Table of Contents
1. Parts Identications
2. Setting up the printer
2.1 Unpacking
2.2 Connecting the cables
2.3 Loading the Roll Paper
2.4 Dip switch setting
3. Control panel and other functions
3.1 Control panel
3.2 Error Indicating
4. Self Test
5. Hexadecimal Dump
6. Specications
6.1. General Specications
6.2. Auto Cutter Specications
6.3. Interface
6.4. Electrical Characteristics
6.5. Environmental Requirements
6.6. Reliability
6.7. Certication
7. Command List
8. Utilities
9. S/W
3
1. Parts Identications
Features LED indicators to
indicate printer status and
switches to operate the
printer.
CONTROL LABEL
Open this cover to load
or replace paper
FRONT COVER
Used to turn on/o
power to the printer
POEWR SWITCH
POWER CONNECTOR
INTERFACE CONNECTOR (USB)
INTERFACE CONNECTOR
PERIPHERAL DRIVE CONNECTOR
4
2. Setting Up the Printer
2-1. Unpacking
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
The Printer User’s Manual Roll Paper
Adaptor(Optional) Interface Cable(optional)
5
2-2. Connecting the Cables
All cables connect to the connector panel on the back of the printer which is shown
below:
POWER CONNECTOR
For connection of the AC adapter.
Never unplug the AC adapter
while the printer is on.
INTERFACE CONNECTOR (USB)
For connection to a host computer.
INTERFACE CONNECTOR
For connection to a host computer.
PERIPHERAL DRIVE CONNECTOR
Connects to peripheral units such
as cash drawer, etc.
Do not connect this to a telephone.
Before connecting any of the cables, make sure that both the printer and the
computer are turned o.
6
2-2-1. Interface Connector
D-SUB 25 Female Serial Centronics Parallel
Serial Interface
PIN SIGNAL I/O DESCRIPTION
2RxD Input Printer transmit data line RS-232C level
3TxD Output Printer receive data line RS-232C level
4, 7 DTR Output Printer handshake to host line RS-232C level
5GND -System Ground
6DSR Input Data Send Ready
1, 8, 9 NC - -
4 3
21
USB “B” TYPE
USB Interface
PIN SIGNAL I/O Description
1+5V -+5V
2DATA- -Printer transmit data line
3DATA+ -Printer transmit data line
4GND -System Ground
7
Centronics Parallel Interface
PIN SIGNAL I/O DESCRIPTION
1 STROBE- Input Synchronize signal Data received
2~9 DATA0~7 Input/Output Data bit Transmitted 0~7
10 ACK- Output Data receiving completed.
11 BUSY Output Impossible to print of data receiving.
12 PE Output Paper empty
13 SELECT Output Printer status for ON/OFF line
14 AUTO FEED- Input Paper auto feed signal
15 GROUND - System ground
16 GROUND - System ground
17 NC -
18 LOGIC-H - +3.3V
19~30 GROUND - System ground
31 INIT- Input Initialize
32 ERROR- Output Printer error
33 GROUND - System ground
34 NC -
35 NC -
36 SELLECT IN- Input Printer select signal
Ethernet Interface
PIN SIGNAL I/O
1 Data Out + Output Data +
2 Data Out - Output Data -
3 GND Ground
4 Data IN + Input Data +
5Data IN - Input Data -
6N.C
7N.C
8N.C
Other manuals for SLK-TE25
1
Table of contents
Other SEWOO Printer manuals
SEWOO
SEWOO LK-P12 Release note
SEWOO
SEWOO LK-P30 User manual
SEWOO
SEWOO SLK-TL100 User manual
SEWOO
SEWOO LK-P22 User manual
SEWOO
SEWOO SLK-TS400EB User manual
SEWOO
SEWOO LK-B10 User manual
SEWOO
SEWOO SLK-D10 User manual
SEWOO
SEWOO SLK-T213EB Series User manual
SEWOO
SEWOO SLK-T42 User manual
SEWOO
SEWOO SLK-TL20 Series User manual
SEWOO
SEWOO SLK-TL100II User manual
SEWOO
SEWOO LK-P11 Installation instructions
SEWOO
SEWOO SLK-TL12X Series User manual
SEWOO
SEWOO LK-P300 User manual
SEWOO
SEWOO LK-P20B User manual
SEWOO
SEWOO LK-P11W User manual
SEWOO
SEWOO LK-P12B User manual
SEWOO
SEWOO SLK-T32EB II User manual
SEWOO
SEWOO SLK-TL122 User manual
SEWOO
SEWOO WTP-150 User manual
