SEWOO LK-P11B User manual
All specifications are subject to change without notice
MOBILE PRINTER
MODEL : LK-P11B
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION
2
Table of Contents
1. Product overview 3
2.
Unpacking
4
3. Installation & Usage 5
3-1. Battery Installation 5
3-2. Battery Charging 6
3-3. Battery Charger Usage 7
3-4. Belt Strap Usage 8
3-5. Separation of Battery from the printer 9
3-6. Shoulder Strap Usage 10
3-7. Leather case Usage 11
3-8. Paper Installation 12
3-9. Control Panel Usage 13
3-10. Self Test 14
4. Peripherals Connection 16
4-1. Bluetooth Connection 16
4-2. Interface Cable Connection 17
5. Printer Cleaning 18
6. Product Specification 19
6-1. Specification 19
7. CPCL Command Compatibilit
y
21
3
1.
Product overview
Power switch
Charger
Connector
Cover open
button
Battery
SERIAL
USB
Paper feed
button
4
2. Unpacking
CD
Quick Manual
Standard
Option
Printer Battery
Roll paper
Belt Buckle
USB Shelded Cable
Recharger Serial Cable
Printer case
Cigar jack
Battery Holder
(Cradle)
shoulder strap
5
3. Setting Up the Product
3-1.
Installing battery
Insert the battery inside printer as shown.
Notes: as the battery is not charged at the time of your purchase, charge the
battery prior to using the product.
(Use the battery charger and/or the optional battery holder.)
Push the Open to the direction as pointed
by arrow in the image.
1 2
3
Open the battery cover and push up the hook to
the direction as above.
Close the battery cover once you inserted the
battery completely.
6
3-2. Battery Charging
Notes:
1. Do not turn on the printer power while you are charging the battery.
2. Do not print while charging the battery
3. Do not connect the charger to the printer on the process of printing.
1. The battery can be charged only when the temperature is 0~40℃
2. Be sure that the printer is turn off and the battery to be charged is installed.
3. Connect the charger to the printer.
4. Recharging will now be started.
7
1. Please press the battery into the holder until you can hear a snapping sound .
2. Insert DC JACK
①
into the end completely as the direct shown above.
3. Plug the power code to electrical outlet.
4.While charging the battery, red light turns on.
Once the charge is completed,green light turns on.
Check the state of code connection when error occurs blinking on red light.
3-3. Battery charger Usage
②
①
LED
8
3-3. Belt Hook Usage
Insert the belt hook screw into the hole of the belt hook.
As shown above,fasten the screw with a screw driver.
1
2
9
3-4. Removing battery
Push the Open into the direction
indicated with the arrow in the image.
Pull out the battery as shown above.
1 2
3
Push up the hook after opening the
battery cover.
Other manuals for LK-P11B
1
Table of contents
Other SEWOO Printer manuals
SEWOO
SEWOO LK-P30 User manual
SEWOO
SEWOO SLK-TL32X Series User manual
SEWOO
SEWOO SLK-TL122 User manual
SEWOO
SEWOO LK-PXX User manual
SEWOO
SEWOO SLK-TE20 Series User manual
SEWOO
SEWOO LK-P12 User manual
SEWOO
SEWOO LK-P12 User guide
SEWOO
SEWOO LK-P43II User manual
SEWOO
SEWOO LK-P12B User manual
SEWOO
SEWOO SLK-TE32 Series User manual
SEWOO
SEWOO LK-P43 User manual
SEWOO
SEWOO SLK-TS400EB User manual
SEWOO
SEWOO LK-P43 User guide
SEWOO
SEWOO LK-P21 User manual
SEWOO
SEWOO LK-P32 User manual
SEWOO
SEWOO SLK-TS100 User manual
SEWOO
SEWOO LK-P12 Release note
SEWOO
SEWOO LUKHAN LK-P21B User manual
SEWOO
SEWOO LK-P24 Installation guide
SEWOO
SEWOO LK-P25 User manual
