SENSIT Technologies GLT Programming manual

Quick-Start Instructions

This is not a substitute for the

instruction manual. It is for

reference only.

Read and understand the

instruction manual before use.

MADE IN THE USA

WITH GLOBALLY SOURCED COMPONENTS

Distributed by:

851 Transport Drive

Valparaiso, IN 46383-8432

Phone: 219 465 2700

Web: www.gasleaksensors.com

Innovative Detection Solutions

1. Turn on G2-GLT Device and Tablet (for the

tablet press and hold the top right button).

2. Wait until G2-GLT displays ‘WAITING FOR

TRAINER’ on screen.

3. Note: If G2-GLT Device has passed

‘WAITING FOR TRAINER’ screen (Either

you have skipped or it has already been

connected with application), It will take you

directly to the Instrument screen.

4. Launch the GLT application (if it does not

auto launch).

5. Tap the “Connect”

6. After the connection has been made, tap

either of the two options

7. Training Mode: It will put device in

simulation mode and allows trainer to

control device (sensors are inactive).

8. Monitoring Mode: It will put device in

Normal mode and allows trainer to monitor

remotely (sensors are active).

9. The G2-GLT will continue through warm-up

and arrive at the work display.

10. The tablet will display the G2-GLT screen

with adjustable slide bars if in “training

mode” or just the screen if in “monitor

mode”.

SENSIT®G LT

QUICK-START INSTRUCTIONS

11. The training modules will be displayed

simultaneously on the right hand side or

bottom side of the screen depending on the

orientation of the tablet.

12. Note: If you need to switch the mode, you

need to ‘Disconnect’ and Restart the ‘G2-GLT

Device’.

13. Note: If any congurations or mode changes

on ‘G2-GLT Device’, please power cycle the

G2-GLT and connect to the application again.

Other SENSIT Technologies Measuring Instrument manuals

SENSIT Technologies

SENSIT Technologies GOLD Programming manual

SENSIT Technologies

SENSIT Technologies VMD Programming manual

SENSIT Technologies

SENSIT Technologies HXG-2d Programming manual

SENSIT Technologies

SENSIT Technologies GOLD CGI User manual

SENSIT Technologies

SENSIT Technologies SENSIT-IT RAMP User manual

SENSIT Technologies

SENSIT Technologies P400 Programming manual

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL User manual

SENSIT Technologies

SENSIT Technologies SENSIT GOLD G2 Programming manual

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL Programming manual

SENSIT Technologies

SENSIT Technologies HCN Programming manual

SENSIT Technologies

SENSIT Technologies GAS-TRAC LZ-30 Programming manual

SENSIT Technologies

SENSIT Technologies IRED Programming manual

SENSIT Technologies

SENSIT Technologies SPOD Quick guide

SENSIT Technologies

SENSIT Technologies GOLD CGI Programming manual

SENSIT Technologies

SENSIT Technologies Trak-It IIIa GLT Programming manual

SENSIT Technologies

SENSIT Technologies GOLD EXCO+1200 Programming manual

SENSIT Technologies

SENSIT Technologies SENSIT GOLD G2 User manual

SENSIT Technologies

SENSIT Technologies Trak-It IIIa GLT User manual

SENSIT Technologies

SENSIT Technologies Trak-It IIIa Programming manual

SENSIT Technologies

SENSIT Technologies GOLD 100 Programming manual

SENSIT Technologies

SENSIT Technologies HCN Programming manual

SENSIT Technologies

SENSIT Technologies HXG-3 Programming manual

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL User manual

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual