Industrivej
8
-
DK
5471
Søndersø
-
Tlf.:
+45
64
89
22
11
-
Fax:
+45
64
89
33
1
1
-
[email protected] Coin Meter - Type MMC
Directions for use
Mounting instructions
Remove front plate by opening the coin box with the enclosed key. Then loosen the screw at the bottom of the front plate,
which can now be removed from the box. The box is mounted on the wall, and the cables can be connected to the terminal
stripsinthebox.Note!Checktheverticallevelwhenmountingthecoinmeter.
Operation
TheCoinmetercanbesetupforvariousmodesofoperationdependentonapplication.Thesearechosenbymeansofa3-
pointswitch(SW2)asshowninbelow5examples.
Technical data
Supply voltage: 230 / 24 / 12 V AC (see sign)
Output: 1 pole potentialfree
Load: 10 Amp co. ϕ= 1
Pushbutton: NC (internal supply 12 V AC)
Dimensions: 210 × 123 × 110 mm
Protection: IP 44
Cable glands: 2 × PG 13.5
Temperature range: -20° - +40°C
O
N
123Program0: Net time showercabinets
Inserttheprescribedcoin.Start/stoptheperiodandtheconnecteddeviceonthetouchbutton
(specialequipment).Thedeviceswitchesoffautomaticallywhenthetimehasexpired.
Additionalcoinsinsertedduringthetimeofoperationwillautomaticallybesummedup.
O
N
123Program1: Timecontrolwithsummation
Insert the prescribed coin and the coin meter switches on the connected device. The device switches off
automaticallywhenthetimehasexpired.
Additionalcoinsinsertedduringthetimeofoperationwillautomaticallybesummedup.
O
N
123Program 2: WashingMachines
Samefunction as inprogram 1, howeverextended so thatpressing the connectedbutton causes afixed
termination period of 20 seconds. This means that it will be possible to open the door of a washing
machinewhenthetimeofoperationhasrunout.
GeneralNCpushbuttonintheterminalpointPUSHBUTTON
Program 3: Solaria
Insert the prescribed coin and the coin meter switches on the connected device. The device switches off
automaticallywhenthetimehasexpired.
Insertionofcoinsduringthetimeofoperationisnotpossibleandthussummationisnotpossible.
Theswitch10,11and12(coinsbeforeoperation)aretobeswitchedoffinthisprogram.
O
N
123
Program 4:Timecontrolwithoutsummation
Same function as in program 3, but insertion of new coin will result in renewed time of operation.
Remainingtime-ifany-willbereset.
O
N
123
Settingoftime
Time per coin may be set in the range 1 sec. to 4 hours. Setting to be made on the first 9 switches on the 12-point switch
SW1.
Switch1-8:
Movetheswitchesinthedirectionofthepointerandyouwillget
theperiodstatedbeloweachswitchasshowninexample1.
Theperiodofeachswitchwillbeaddedup,andtheresultofthe
shownexample1willbe: 2+8+30=40minutes.
Switch9:
Onthisswitchminutesorsecondsapplyingforthe
switches1-8arechosen.
Page 1 of 3
O
N
123456789 10 11 12
1 2 4 8 15 30 60120
Switch 9 down (off) = Min.
Switch 9 up (on) = Sec.
Sec./min. Example 1
