Santec SNC-637ID User manual
Version 1.0sfi/0511/engl/A6
USER MANUAL
IP day/night PTZ camera
in weather-proof housing
Model:
SNC-637ID
Dear customer,
Thank you for purchasing a high quality SANTEC device.
We recommend that you read this manual thoroughly before operating your new
system for the first time. Please follow all instructions and observe the warnings
contained in this manual.
Please contact your local dealer or use the SANTEC Service Hotline if you have any
questions or if you wish to claim for a service or warranty.
You will find further information on our website:
www.santec-video.com
All rights reserved. This publication may not be reproduced, stored in a retrieval system or transmitted,
in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without
the written prior permission of Sanyo Video Vertrieb AG.
No reproduction of any part or excerpts thereof are permitted.
Errors excepted. Specifications are subject to change without notice for quality improvement.
SANTEC is a registered trademark of Sanyo Video Vertrieb AG. All other companies or products
mentioned in this publication are trademarks, registered trademarks or brands of the respective
company. They are not connected in any way with Sanyo Video Vertrieb AG.
© Copyright by Sanyo Video Vertrieb AG
SANTEC Service Hotline:
+49 / 900 / 1 72 68 32
+49 / 900 / 1 SANTEC
(if available from your country)
User manual SNC-637ID
_________________________________________________________________________________
- 3 -
Safety precautions
Caution
Description of symbols
Danger: This symbol is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product‟s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to a person.
Warning: This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
CE compliance
Attention: Any changes or modifications to this appliance which have not been explicitly
approved of by the respective regulatory authority, may lead to a prohibition of usage of this
appliance.
This appliance complies with the CE guidelines.
User manual SNC-637ID
_________________________________________________________________________________
- 4 -
Safety instructions
Before operating the appliance, please read this manual carefully and retain it for further
reference.
Before cleaning the appliance, it has to be switched off and unplugged from the power outlet.
Wipe the appliance with a soft damp cloth.
Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.
Do not use attachments unless recommended by the manufacturer as they may affect the
functionality of the appliance and result in the risk of fire, electric shock or injury.
Never install the appliance in areas exposed to water or other liquids.
The appliance has to be installed in a safe and stable location which is able to carry the weight of
the appliance. Quick stops, excessive force, and uneven surfaces may cause the appliance to fall
causing serious injury to persons and damage to objects.
Openings in the appliance, if any, are provided for ventilation to ensure reliable operation of the
appliance and to protect if from overheating. These openings must not be covered or blocked.
Please make sure that the appliance does not overheat.
The appliance should only be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied at the installation location, please contact
your local dealer.
An appliance which is powered through a polarized plug (a plug with one blade wider than the
other) will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized
plug.
If the appliance is powered through a grounding-type plug, the plug will only fit into a grounding-
type power outlet. This is a safety feature. If your outlet does not have the grounding plug
receptacle, contact your local electrician.
Route power cords and cables in a manner to protect them from damage by being walked on or
pinched by items places upon or against them.
For protection of the appliance during a lightning storm or when it is left unattended and unused
for a longer period, unplug the appliance from the wall outlet. Disconnect any antennas or cable
systems that may be connected to the appliance. This will prevent damage to the appliance due to
lightning or power-line surges.
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
Never insert items into the openings of the appliance. They may touch parts under electric current
which may cause an electric shock.
Never pour any liquids over the appliance.
User manual SNC-637ID
_________________________________________________________________________________
- 5 -
In case of any operating interruption or a complete operating failure please switch off the
appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance
yourself, as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
When replacement parts are required, be sure that the service technician uses replacements parts
specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
Upon completion of any service or repairs to the appliance, ask the service technician to perform
safety checks to verify that the appliance is in proper operating condition.
The appliance should only be installed by qualified service personnel and has to comply with local
specifications and regulations.
Never point the camera at an object with a high degree of luminance. Bright vertical or horizontal
lines can result in a distortion (outshine) of the entire image on the monitor. This artifact is not an
error but a particularity of semiconductor CCDs when they are directly exposed to a powerful light
source.
At the installation site, the camera has to be adjusted to the given light conditions (see OSD).
Please respect the local legal regulations on waste if you need to dispose of discarded appliances.
This symbol means that electrical appliances need to be disposed of properly and not
simply with unsorted household refuse. Please respect local regulations on waste
disposal.
About this user manual
This manual aims at assisting the user on how to operate camera SNC-637ID.
This manual is subject to rigid quality control. However, no guarantee can be given that
mistakes are not present. We reserve the right to make changes to the manual without prior
notice.
Before operating the appliance, please read this manual carefully and retain it for further
reference.
Verify that all appliance items are included in the delivery. Should items be missing, do not
operate the appliance and contact your local dealer.
Never attempt to repair the appliance yourself. This should only be done by qualified service
personnel.
Improper handling of the appliance will invalidate the warranty.
User manual SNC-637ID
_________________________________________________________________________________
- 6 -
1. FEATURE
1.1 Package
1x camera SNC-637ID
1x SanView Lite software
1x audio cable
1x I/O cable
1x user manual
1.2 Dimension and Connector Description
1.2.1 Dimensions
296
276.6
118.6
80
100
138.6
4- 8
All dimensions in mm.
User manual SNC-637ID
_________________________________________________________________________________
- 7 -
1.2.2 Connector Description
DC 12V Power Input : The SNC-637ID Camera has a port that can output DC12V
for the analog camera module.
Digital Output
Digital Input
Video Output : The SNC-637ID Camera supports one analog video out of
composite signal with BNC connector.
Ethernet Port : Standard RJ45 connector. Supporting NWAY.
Reset Button
Step 1 : Switch off SNC-637ID Camera by disconnecting the power cable.
Step 2 : Using a suitable pointed object, press and continue to hold the Reset
Button depressed. While continuing to hold the reset button depressed, reconnect
the power cable.
Step 3 : Keep holding the reset button depressed around 6 seconds, release the
reset button. The unit will start up with factory default settings.
DIP Switch (Baud rage & Address setting)
: Please refer to the 2.4.3 for more descriptions
Sensor I/O Port
(No Network support)
User manual SNC-637ID
_________________________________________________________________________________
- 8 -
2. INSTALLATION
2.1 Installation
It explains under the condition of using Static IP between User s PC and the SNC-637ID.
To install, the SNC-637ID should connect to the PC directly or to Local Network.
1) Connect the SNC-637ID to the PC by LAN cable (Cross Cable)
2) Supply the power to the SNC-637ID (Allowed to use Regulated Power Supply)
3) After 2minute of power supplying, the booting is finished by checking LINK LED-On.
2.2 Video Check
Basic network setting value of SNC-637ID is to be ;
IP Address : 192.168.1.168
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
To connect SNC-637ID inuser s PC, change the setting value of PC network environment.
Pic. 0 1 Network Setting of User PC
User manual SNC-637ID
_________________________________________________________________________________
- 9 -
Set IP Address, Subnet Mask and Gate-way of User s PC with 192.168.1.50,
255.255.255.0 and 192.168.1.1 as shown on [Pic. 2-1].
Pic. 0 2 Web Browser Input
Run Web Browser as [2-2] and input 192.168.1.168 in URL and click Enter ,then [2-3]is
to be shown. In case [2-3] does not appear, re-set Hardware (Reset Button in Camera)
to reboot and run Web Browser, input 192.168.1.168 in URL line and click Enter .
Pic. 0 3 SNC-637ID Log-in Page
Default login information:
User name: admin
Password: 9999
Table 0-1 User ID, Password, Rights
User ID
User Password
Rights
guest
guest
Monitor only
admin
9999
All Function
Above [Table 2-1] is the value basically set in SNC-637ID.
Change the User Information in General Setting of 4. Expert Setting
after installation of SNC-637ID.
User manual SNC-637ID
_________________________________________________________________________________
- 10 -
Click (1) after input ID:root, Password:root in [2-4].
Message Window [2-4] appear soon, click Yes .
If click No , Web Viewer doesn t work. .
Upon installation, Web Viewer [Pic. 2-5] appear and image of Camera is to be seen.
Pic. 0 5 Web Viewer
Table of contents
Other Santec IP Camera manuals
Santec
Santec SNC-6312IRH User manual
Santec
Santec SNC-211RSIA User manual
Santec
Santec VTC-249IRP User manual
Santec
Santec SNC-3342 User manual
Santec
Santec SNC-331DLNN User manual
Santec
Santec VCHD-1622 User manual
Santec
Santec SNC-380DN User manual
Santec
Santec VDC-610ID User manual
Santec
Santec SNC-431RDIA User manual
Santec
Santec SNC-3302 User manual
Santec
Santec VTC-475IRT User manual
Santec
Santec SNC-521IR/W User manual
Santec
Santec SNC-3901MDN User manual
Santec
Santec SNC-CPR-01 User manual
Santec
Santec SNC-311RINA User manual
Santec
Santec SNC-240 User manual
Santec
Santec SNC-P3601M User manual
Santec
Santec SNC-565IR/W User manual
Santec
Santec SNC-670ID User manual
