RTX 6001 User manual

Quick-start Guide V1.2

Audio Analyzer

Quick

RTX6001 Audio Analyzer

RTX6001

Audio Analyzer

Quick

start Guide

Quick-start Guide V1.2

Unpacking the RTX6001 Audio

Analyzer

1.1

nitial nspection

Please inspect the shipping container for damage. If the shipping container or

material is damaged, it should be kept until the contents have been checked mecha

nicall and electricall . If an mechanical or electrical damage is observed please notif

RTX. Please refer to the description on how to contact RTX provided in t

Please also keep the damaged shipping materials (if an ) for inspection b the carrier

and an RTX representative.

1.2 Box Contents

When unpacking the

RTX6001 Audio Anal zer

are included in the box.

•

RTX6001 Audio Anal zer

•Main Power cable

•

USB cable (for communication between the

•

Certificate of conformit (not for demo units)

•

Calibration report (not for demo units)

nstallation of the RTX6001 Audio

Analyzer

The RTX6001 Audio Ana

l zer

cabinet (with optional mounting hardware). This section shows ou how to:

•

Check the operating voltage and fuse rating and change if needed

2.1.

•

Install RTX6000 series driver on

•

Connect the Anal zer to a PC USB port; the PC should install driver automaticall

– see section 2.3.

•

Switch the Anal zer on for the first time

•

Install the RTX6001 Attenuation Control program (optional)

•

Install an audio anal zer software of our choice

•

Run the anal zer program. Select the RTX6001 as audio interface

2.6.

RTX6001 Audio Analyzer

Unpacking the RTX6001 Audio

nitial nspection

Please inspect the shipping container for damage. If the shipping container or

material is damaged, it should be kept until the contents have been checked mecha

nicall and electricall . If an mechanical or electrical damage is observed please notif

RTX. Please refer to the description on how to contact RTX provided in t

Please also keep the damaged shipping materials (if an ) for inspection b the carrier

RTX6001 Audio Anal zer

please verif that the items listed below

RTX6001 Audio Anal zer

unit

USB cable (for communication between the

Anal zer and a PC)

Certificate of conformit (not for demo units)

Calibration report (not for demo units)

nstallation of the RTX6001 Audio

l zer

can be used on the benchtop or installed in a 19

cabinet (with optional mounting hardware). This section shows ou how to:

Check the operating voltage and fuse rating and change if needed

Install RTX6000 series driver on

a PC – see section 2.2.

Connect the Anal zer to a PC USB port; the PC should install driver automaticall

Switch the Anal zer on for the first time

– see section 2.4.

Install the RTX6001 Attenuation Control program (optional)

–

see

Install an audio anal zer software of our choice

– see

section 2.6

Run the anal zer program. Select the RTX6001 as audio interface

Unpacking the RTX6001 Audio

Please inspect the shipping container for damage. If the shipping container or

packaging

material is damaged, it should be kept until the contents have been checked mecha

nicall and electricall . If an mechanical or electrical damage is observed please notif

RTX. Please refer to the description on how to contact RTX provided in t

he User Guide.

Please also keep the damaged shipping materials (if an ) for inspection b the carrier

please verif that the items listed below

nstallation of the RTX6001 Audio

can be used on the benchtop or installed in a 19

-inch rack

cabinet (with optional mounting hardware). This section shows ou how to:

Check the operating voltage and fuse rating and change if needed

– see section

Connect the Anal zer to a PC USB port; the PC should install driver automaticall

see

section 2.5.

section 2.6

Run the anal zer program. Select the RTX6001 as audio interface

– see section

Quick-start Guide V1.2

2.1

Checking the Voltage Setting and the Fuse Rating

IMPORTANT!

Check whether the voltage

setting

main power c

ord (see instructions below).

240 V operation.

The power line fuses are

located within the

picture below

. For 110V to 120V operation the fuse

operation the fuses are T0.325 250V.

Fuse location

the operating voltage needs to be changed, do the following:

Remove the power cord from the

Pull out the fuse drawer e.g. with a flat screwdriver.

Pull out the gre voltage selector and rotate it 180

voltage.

4Insert

the correct fuse

5Replace the fuse

drawer

Fuse drawer

RTX6001 Audio Analyzer

Checking the Voltage Setting and the Fuse Rating

setting

compliant to the local region before connecting the

ord (see instructions below).

The RTX6001 is delivered prepared for 200V

located within the

power entr module o

n the rear panel

. For 110V to 120V operation the fuse

s are T0.63

250V. For 220

operation the fuses are T0.325 250V.

the operating voltage needs to be changed, do the following:

Remove the power cord from the

Anal zer.

Pull out the fuse drawer e.g. with a flat screwdriver.

Pull out the gre voltage selector and rotate it 180

to select

the correct fuse

s as shown in the figure below.

Use two identical fuses.

drawer

in the power entr module.

Checking the Voltage Setting and the Fuse Rating

compliant to the local region before connecting the

The RTX6001 is delivered prepared for 200V

–

n the rear panel

, see

250V. For 220

-240V

to select

a different line

Use two identical fuses.

Quick-start Guide V1.2

2.2

nstalling the RTX6000 Series PC Driver

When using a Windows PC, a driver is needed to support USB Audio Class 2.0. The driver

for the RTX6001 must be installed on a PC for proper operation. The driver supports

Windows 7, 8, 8.1 and 10. Both 32 and 64 bit s stems are supported.

Download the software installation package from the dow

https://www.rtx.dk/en/design

Run the program

RTX_v4.33.0_2017

2.3

Connecting the Audio Analyzer to a PC USB Port

To operate the Audio Anal zer ou must connect a PC (Windows/MAC/Linux) s stem

controller to the USB port using a standard USB High Speed cable with T pe

(one is supplied with the Audio Anal zer). The PC USB port should not be routed through

a USB hub -

neither external nor internal to the PC.

Standard USB cable with Type A

When the RTX6000 series PC driver is installed, the PC should

Anal zer and enumerate the unit.

2.4

Switching the Audio Analyzer on for the First Time

Before switching the Audio Anal zer on please ensure that the:

Line voltage selector is set to the voltage of the power suppl

2) Correct fuse is inst

alled

Power suppl voltage is in the specified range

Connect the Main Power Cord to the IEC power connector on the back of the unit.

Turn on the Audio Anal zer b toggling the ON/OFF button on the front.

Some of the LED’s on the front should light up.

Depending on the attenuator settings, some clicks from rela s ma be heard at power on

and later during operation. This is normal.

Caution:

To avoid problems due to DC offsets, it is recommended to use the AC input setting

most cases

. AC coupling is e

to 0dBV, -10dBV or -20dBV.

Furthermore, the unit should not be operated with excessive overload for extended

periods of time. Doing so ma compromise its performance.

RTX6001 Audio Analyzer

nstalling the RTX6000 Series PC Driver

When using a Windows PC, a driver is needed to support USB Audio Class 2.0. The driver

for the RTX6001 must be installed on a PC for proper operation. The driver supports

Windows 7, 8, 8.1 and 10. Both 32 and 64 bit s stems are supported.

Download the software installation package from the dow

nload center on the RTX website

https://www.rtx.dk/en/design

-services/contact/download-center/

RTX_v4.33.0_2017

-10-11_setup

.exe (or later version).

Connecting the Audio Analyzer to a PC USB Port

To operate the Audio Anal zer ou must connect a PC (Windows/MAC/Linux) s stem

controller to the USB port using a standard USB High Speed cable with T pe

(one is supplied with the Audio Anal zer). The PC USB port should not be routed through

neither external nor internal to the PC.

Standard USB cable with Type A

B plugs

When the RTX6000 series PC driver is installed, the PC should

recognize the Audio

Anal zer and enumerate the unit.

Switching the Audio Analyzer on for the First Time

Before switching the Audio Anal zer on please ensure that the:

Line voltage selector is set to the voltage of the power suppl

alled

Power suppl voltage is in the specified range

Connect the Main Power Cord to the IEC power connector on the back of the unit.

Turn on the Audio Anal zer b toggling the ON/OFF button on the front.

Some of the LED’s on the front should light up.

Depending on the attenuator settings, some clicks from rela s ma be heard at power on

and later during operation. This is normal.

To avoid problems due to DC offsets, it is recommended to use the AC input setting

. AC coupling is e

speciall important when operating the unit with inputs set

Furthermore, the unit should not be operated with excessive overload for extended

periods of time. Doing so ma compromise its performance.

When using a Windows PC, a driver is needed to support USB Audio Class 2.0. The driver

for the RTX6001 must be installed on a PC for proper operation. The driver supports

nload center on the RTX website

.exe (or later version).

Connecting the Audio Analyzer to a PC USB Port

To operate the Audio Anal zer ou must connect a PC (Windows/MAC/Linux) s stem

controller to the USB port using a standard USB High Speed cable with T pe

A-B plugs

(one is supplied with the Audio Anal zer). The PC USB port should not be routed through

recognize the Audio

Switching the Audio Analyzer on for the First Time

Connect the Main Power Cord to the IEC power connector on the back of the unit.

Turn on the Audio Anal zer b toggling the ON/OFF button on the front.

Depending on the attenuator settings, some clicks from rela s ma be heard at power on

To avoid problems due to DC offsets, it is recommended to use the AC input setting

speciall important when operating the unit with inputs set

Furthermore, the unit should not be operated with excessive overload for extended

Quick-start Guide V1.2

2.5

nstalling the RTX6001 Atten

(optional)

A small utilit program is provided for the Audio Anal zer. It allows the user to monitor

and control the status of the front panel settings on the connected PC.

Locate and run the RTX6001_v1.1

software installation package.

After installation the following control panel will be available:

To bring up the control panel later, run the program b clicking the program shortcut.

2.6

nstalling an Audio

To use the RTX6001 for audio measurements, a program should be installed.

The list below shows some of the audio anal zer programs generall available on the

market.

Virtins Multi-Instrument -

http://www.virtins.com/multi

Arta, Steps -

http://www.artalabs.hr

HpW Works -

http://www.hpw

MATAA -

http://audioroot.net/mataa

RightMark -

http://audio.rightmark.org

SpectraPlus -

http://www.spectraplus.com

VisualAnal zer -

http://www.sillanumsoft.org

Audacit -

http://www.audacit team.org/

Virtins Multi-

Instrument has

control of output and input

settings

ASIO or WASAPI interface is recommended for best performance.

Other SW packages can also be used.

Refer to the User Manual for t

The RTX6001 Audio Anal zer can also be used for audio pla back and/or recording.

RTX6001 Audio Analyzer

nstalling the RTX6001 Atten

uation Control Program

A small utilit program is provided for the Audio Anal zer. It allows the user to monitor

and control the status of the front panel settings on the connected PC.

Locate and run the RTX6001_v1.1

.exe (or newer) installation program from the

software installation package.

After installation the following control panel will be available:

To bring up the control panel later, run the program b clicking the program shortcut.

nstalling an Audio

Analyzer Program

To use the RTX6001 for audio measurements, a program should be installed.

The list below shows some of the audio anal zer programs generall available on the

http://www.virtins.com/multi

instrument.shtml

http://www.artalabs.hr

http://www.hpw

-works.com/

http://audioroot.net/mataa

-mats-audio-anal zer/

http://audio.rightmark.org

http://www.spectraplus.com

http://www.sillanumsoft.org

http://www.audacit team.org/

Instrument has

an RTX6001 option for

dedicated HW support

settings

from the anal zer SW.

ASIO or WASAPI interface is recommended for best performance.

Other SW packages can also be used.

Refer to the User Manual for t

he selected anal zer program for further information.

The RTX6001 Audio Anal zer can also be used for audio pla back and/or recording.

uation Control Program

A small utilit program is provided for the Audio Anal zer. It allows the user to monitor

.exe (or newer) installation program from the

To bring up the control panel later, run the program b clicking the program shortcut.

To use the RTX6001 for audio measurements, a program should be installed.

The list below shows some of the audio anal zer programs generall available on the

instrument.shtml

dedicated HW support

, with full

he selected anal zer program for further information.

The RTX6001 Audio Anal zer can also be used for audio pla back and/or recording.

Other manuals for 6001

Table of contents

Other RTX Measuring Instrument manuals

RTX

RTX 6001 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual