Renegade 702000 User manual
INSTRUCTION MANUAL
PLEASE READ THIS INSTRUCTION MANUAL
BEFORE YOU BEGIN ASSEMBLY
!
DESCRIPTION:
CODE:
VERSION:
ReNegaDE Air Mag. M.W.
702000
20211007
M.W.
ReNegaDE
START
STOP
RESET
ENTER
WARNING :
Heart rate monitoring systems
may be inaccurate. If youfeel faint,
stop exercising immediately
Cal./hr
Meter
Quick Start
1.
Press " ENTER "
2.
Press " START"
3.
Go!
M.W.
2
contents
safety information 03
customer support 04
assembly instructions 05
air mag. m.w. features explained 09
computer instructions 12
- quick start
- button functions
- console display and feedback
- using workout programs
how to take care of your air mag. m.w. 19
troubleshooting 19
exercising with your air mag. m.w. 20
exploded diagrams and parts list 26
console assembly 30
your warranty 31
Safety Information
3
PLEASE READ THIS INSTRUCTION MANUAL BEFORE YOU BEGIN ASSEMBLY. GREAT
CARE HAS BEEN TAKEN TO DESIGN THESE INSTRUCTIONS AND FOLLOWING THEM
WILL HELP YOU WITH QUICKER ASSEMBLY AND MINIMISE THE RISK OF INJURY
Safety Standards
This Air Mag. M.W. meets the requirements of the EN ISO 20957-1: 2013, Class SA
It is important that you keep these instructions for future reference.
This product is not suitable for therapeutic purposes.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY -
THIS LIST IS NOT EXHAUSTIVE.
•Always assemble and operate the product on a level surface,
ensure that the product is stable before use.
• Try to ensure that your back is straight while exercising,
especially for long periods
•The safety level of this equipment can only be maintained
if it is regularly examined for wear and tear
•Keep hands away from moving parts.
•Replace defective components immediately, and/or
keep the equipment out of use until it is repaired.
•Use only the adjustment settings as described in the
instructions. Always use the correct adjustment pin/xing.
•Special attention should be taken to inspect the
components, such as pulleys, bearings, straps, rollers are
always more susceptible to wear before use.
•Never leave any adjustment devices projecting from the
product.
•Always wear suitable clothing and footwear e.g. tracksuit /
shorts / training shoes
•Remove all personal jewellery before exercising.
•Ensure you warm-up well before using the equipment as
this will help to prevent muscle strain.
•After eating, allow 1-2 hours before exercising as this will
help to prevent muscle strain.
• Never overload the equipment – the maximum user weight
of this ski is 180kg / 400lbs.
•Don’t rock this equipment form side to side
•Never use the equipment in any other manner other than
the ways explained in these instructions and/or any
wall-chart supplied.
•This product has an intergrated resistance system without
a constant power mode that is governed by magnetic
resistance.
•Losing grip or suddenly releasing the handle could result
in an uncontrolled return, ensure there is free space around
the product.
•You may want to store this product away to save space -
be aware of moving mechanical parts which could cause
injury.
•To prevent shock, keep all electical components, such as
the console, motor, cord and switch away from water.
•Do not use any accessories that aren’t specically
recommended by the manufacturer, these might cause
injuries or cause the unit to fail.
•Work within your recommended exercise level, do NOT
work to exhaustion.
•If you feel any pain or abnormal symptoms, STOP YOUR
WORKOUT IMMEDIATELY. Consult your physician
immediately.
•Parents and others in charge of children should be aware
of their responsibility, because the natural play instinct
and the fondness of experimenting of children can lead to
situations and behaviour for which the training equipment
is not intended
•If children are allowed to use the equipment,
their mental and physical development and above all
their temperament should be taken into account. They
should be controlled and instructed in the correct use
of the equipment.
•The equipment is under no circumstances
suitable as a children’s toy.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
• The free area shall be not less than 0.6 m greater than
the training area in the directions from which the
equipment is accessed.
Injuries to health may result from incorrect or excessive training.
!
Heart Rate Monitoring System may be inaccurate, Over exercise may result in
serious injury or death. If you feel faint stop exercising immediately !
Be aware of the edges on the platform when in use or move it around.
!
!
!
The safety maximum length of the pulling handle motion on this product is 200cm,
please be awared to avoid any exercise that over this motion range limit.
It is your responsibility to contact us for further advices, when you found any damages which
impact the original design and potential issue caused on the product after carton opened.
!
!
The max. operating force allowed is 18 kg.
!
Customer Support
Should you require any assistance regarding this product please gather the following information,
and then contact us using the details below:
1. Serial no. - this can be found on
the sticker below, located as indicated.
For future reference, please write down
your serial number in the space
provided below.
2. Original purchase date
3. Place of purchase
4. Information about the place
and conditions of use
5. Precise description of the issue/defect
Your Serial No. is:
Contact Us
4
Model: Air Mag. M.W.
Manufacture Date:
Max. User Weight: 180kg / 400lbs
Class Requested by standard: EN ISO 20957-1: 2013, Class SA
Warning: Heart rate monitoring system may be inaccurate. Over exercising may result
in serious injury or death. If you feel faint stop exercising immediately.
Warning: Toreduce the risk of electric shock- unplug before cleaning or servicing.
Warning: This product must be securely and reliably fastened to a solid wall.
Serial No.: C2PAMMW-211000001
Care & Maintenance
•
Always place the equipment in a dry environment.
•
Use a warm, damp cloth to keep the product clean.
•
No wet cleaning of electrical components, unplug before any care and maintenance
•
The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This
includes any straps, pulleys, nuts, bolts, moving parts, bushes, cords, wheels, bearings & connection points etc
•
Ensure that you inspect the product regularly - at least once a week is recommended.
•
Ensure that all xings are tight before use.
•
Always replace damaged / worn components with original parts from the manufacturer.
Protect the environment by not disposing of this product with household waste.
Check your local authority for recycling advice and facilities (Europe only).
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•Non-rechargeable batteries are not to be recharged.
•Rechargeable batteries are to be removed from the appliance before being charged.
•Dierent types of batteries or new and used batteries are not to be mixed.
•Batteries are to be inserted with the correct poiarity.
•Exhausted batteries are to be removed form the appliance and safely disposed of
•If the appliance is to be stored unused for a long period, the batteries should be removed.
•The supply terminals are not to be short-circuited.
•This Air Mag. M.W. Compact comes up wiith dimensions of 49 x 37 x 209cm and 27.5 kg ( 60.6 lbs ) weight.
Assembly Instruction
If you suspect you may have some parts missing, please
contact us before going back to your retailer. Refer to the
Customer Support section on page 4 for contact details.
!
This Air Mag. M.W. takes up
a oor space of 110cm x 60cm for use,
and weighs 27.5kg
!
Before you start
1. Prepare your work area -
It is important for you to
assemble the product at
a clean and uncluttered
space.
2. Work with a friend -
we recommend you
to have someone
assisting you with the
assembly as some of the
components are quite
heavy.
3. Open the carton -
checking any warnings
on the carton and make
sure you have it the
right way up.
4. Unpack the carton
Make sure you have
the following parts:
Tools and Consumables
5
Allen Key (6mm and 4mm)
Part
No.
Q1
Console
x 1
Part
No.
M18
Pulling Grip
Handle Bar
x 2
Part
No.
M42
702000
Main Body
Cross Grip
Handle bar
x 2
Part
No.
Q8
M6 x 10mm
Allen Head Bolt x 4
(Pre-attached on console post)
AA Batteries
x 4
1. Attach the Console
6
All of the required bolts & washers had been pre-assembled to ensure its installation quality,
remove the relative bolts & washers then fasten as instructions
to complete your Air Mag. M.W. assembly.
!
1-2 Power Up
• Install the AA battery x 4 provided into the compartment
in the back of the console properly
• Attach the battery cover onto the console securely.
Console
Mounting Tube
Console
Mounting Tube
Console
Arm
Middle
Section
Wires
Console
Section
Wires
1.
2.
1-1 Attach the Console Arm
• Remove the two M6 x 10mm Allen Head Bolts (Q8)
from the Console Mounting Tube with the 4mm Allen Key provided as shown.
FIXINGS:FIXINGS:
x 2
FIXINGS:TOOLS:
4mm
• Connect the Console Section Wires ( 3 pins plug & 3 pins socket ) (Q9) and
Middle Section Wires ( 3 pins socket & 3 pins plug ) (Q10) & (Q11) together accord-
ingly and then insert these two wires into the Console Arm (Q6) carefully.
• Attach the Console Arm (Q6) to the mounting tube carefully with two M6x 10mm
Allen Head Bolts (Q8) with nger tight in position rstly and then secure with the
4mm Allen Key – provided.
Part
No.
Q8
7
2. Attach the Grip Handles
• Use your thumb & index nger of one hand to grasp
& pull the locking sleeve as shown.
• Attach the plug head of selected handle into the
locking socket and release to secure the handle at-
tachment properly.
• Repeat the other side handle with same procedures.
3. Attach the Air Mag M.W. FIXINGS:FIXINGS:
x 4
FIXINGS:TOOLS:
3-1. Remove the metal posts from the back of the Air Mag. M.W.
• Loosen the four M8 x 60mm Hex Socket Head Bolts
from the two metal posts as shown.
Note: The four Hex Socket Head Bolts,
four Plastic Spacers and the two
Metal Posts are used for packaging
protection purpose, which won’t be
used again during the assembly.
Locking
Sleeve
Plug Head
Plastic
Spacers
Metal
Posts
M8 x 60mm Hex
Socket Head Bolt
1
2
8
Be sure to t the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
FIXINGS:FIXINGS:
x 4
FIXINGS:TOOLS:
Part
No.
S7
3-2. Attach the Air Mag. M.W.
• Have someone to assist you to hold the Air Mag M.W.
evenly and attach it to the Fixing Bracket of the
selected attachment with four M8 X 25mm Hex Head
Socket Bolts (S7) as shown.
• Tighten the bolts securely with the 6mm Allen Key -
provided.
Final Checks
Your Air Mag M.W. is now assembled. Please make the following checks before you use it for the rst time.
•Make sure all screws, bolts & nuts are tighten securely.
•Make sure you have positioned it on at & level surface.
Fixing
Bracket Fixing
Bracket
Air Mag. M.W. Features Explained
Adjusting the Console
1. Adjust the console display to suitable angle for easy
viewing by rotating the console itself with both
hands evenly as shown.
2. You can also change the console up side down for easy viewing when needed by rotating the console with both
hands evenly as shown .
• Fold down or upward the displayed screen slowly.
• Rotate the console clockwise ( or anti-clockwise ) carefully.
• Fold up or downward the displayed screen slowly as required.
Exchanging the Grip Handle
1. Use your thumb & index nger of one hand to grasp &
pull the locking sleeve as shown.
2. Attach the plug head of selected handle into the locking socket
and release to secure the handle attachment properly.
3. Repeat the other side handle with same procedures
9
Locking
Sleeve
Plug Head
1
23
Adjusting the Locations ( 702011 & 702021 models )
1. Push to lift the Air Mag M.W. slightly with both hands to
remove the lock pin in position
2. Pull the right side lock handle with your right hand
and adjust the Air Mag M.W. up or down on the track as wished.
3. Release the right side lock handle after the required position found.
Adjusting the Resistance
1. This Air Mag M.W. features a speed independent ( 14
levels adjustable ) system.
2. The harder you pull, the more resistance you will feel.
As you put more eorts into your pulling, you will go
faster, produce more watts and burn more calories. But
it is more important to ski for a longer time than to ski
harder.
3. The resistance is controlled by a magnet mechanism,
which is moved closer or further away from the air fan
wheel assembly – the closer the magnet is to the fan
wheel the harder of resistance occurred.
4. The magnet is controlled manually, by moving the dial
lever.
5. The resistance levels goes from 1 = easy to 14 = hard.
10
Dial
Lever
2
3
Right Side
Lock Handle
Table of contents
