Reed Instruments R7000SD User manual
Data Logging
Vibration
Meter
Instruction
Manual
R7000SD
REED Instruments
2
Table of Contents
Introduction ................................................................................................ 3
Product Quality........................................................................................... 3
Safety ......................................................................................................... 4
Features...................................................................................................... 4
Included...................................................................................................... 4
Specications..........................................................................................5-6
Instrument Description ............................................................................... 7
Display Description .................................................................................... 8
Operating Instructions...........................................................................9-11
Power ON/OFF ...................................................................................... 9
Vibration Sensor..................................................................................... 9
Selecting Measurement Modes ............................................................. 9
Changing Units of Measure ................................................................. 10
Zero Adjustment .................................................................................. 10
Max Hold Reset.................................................................................... 10
Data Hold ............................................................................................. 11
Recording Maximum and Minimum Readings..................................... 11
Backlight .............................................................................................. 11
Setup Mode.........................................................................................12-14
Setting the Time and Date (dAtE) ....................................................... 12
Setting Data Decimal Format (dEC).................................................... 13
Enabling/Disabling Auto Power Off (PoFF)......................................... 13
Enabling/Disabling the Beeper (bEEP) ............................................... 13
Setting the Data Logging Sampling Rate (SP-t) ................................. 14
Formatting the SD Card (Sd F) ........................................................... 14
Verify Set Time and Date .................................................................... 14
Verify Sampling Rate .......................................................................... 14
continued...
REED Instruments
3
Data Logging............................................................................................ 15
Data Recording Modes....................................................................... 15
Manual Data Logging Mode ............................................................... 15
Automatic Data Logging Mode .......................................................... 16
Transferring Data from the SD Memory Card to a Computer............. 16
Data Stream Output ................................................................................. 17
3.5mm Terminal to RS-232 Serial Connection ................................... 18
System Reset ........................................................................................... 18
Battery Replacement................................................................................ 18
Applications.............................................................................................. 19
Accessories and Replacement Parts ....................................................... 19
Frequently Asked Questions (FAQ's)...................................................19-20
Product Care ............................................................................................ 20
Product Warranty ..................................................................................... 20
Product Disposal and Recycling .............................................................. 20
Product Support....................................................................................... 21
Introduction
Thank you for purchasing your REED R7000SD Data Logging
Vibration Meter. Please read the following instructions carefully before
using your instrument. By following the steps outlined in this manual your
meter will provide years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet the stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
REED Instruments
4
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
Features
• Measuresvelocityandaccelerationtodeterminevibrationlevel
• Userselectableunitofmeasure(metricorimperial)
• RMS,Peakhold,DataholdandMax/Minfunctions
• 10Hzto1kHzfrequencyrange
• Basicaccuracyof+/-5%
• Real-timedataloggerwithintegratedSDmemorycard
• Userselectablesamplingratefrom1to3600seconds
• Easy-to-readbacklitLCDdisplay
• Tripodmountforlong-termmonitoring
• MeetsISO1954standards
• Lowbatteryindicatorandautoshutoff
Included
• VibrationProbewith47.2"(1.2m)Cable
• HardCarryingCase
• Batteries
REED Instruments
5
Specifications
Acceleration
MeasuringRange: 0.5to199.9m/s²
0.05 to 20.39g
2to656ft/s²
Accuracy: ±(5%+5dgt)
Resolution: 0.1m/s²
0.01g
1ft/s²
Velocity
MeasuringRange: 0.5to199.9mm/s
0.05to19.99cm/s
0.02to7.87in/s
Accuracy: ±(5%+5dgt)
Resolution: 0.1mm/s
0.01cm/s
0.01in/s
General Specifications
Response Time: 1 second
FrequencyRange: 10Hzto1KHz
Display: 4-digit LCD
Backlit Display: Yes
RMS, Peak and
MaxHoldMeasurements: Yes
DataHold: Yes
Min: Yes
Max: Yes
Zero Adjustment: Yes
Datalogging Capabilities: Yes
Real-Time Clock and
Date Stamp: Yes
Selectable Sampling Rate: Yes (1, 2, 5, 10, 30, 60, 120, 300,
600, 1800, 3600 seconds)
continued...
REED Instruments
6
ExternalMemory: Yes,expandableupto16GBwith
SD card (optional)
AutoShut-off: Yes(after10minutes/off)
KickStand: Yes
Tripod Mountable: Yes
Low Battery Indicator: Yes
ProbeCableLength: 47.2"(1.2m)
PowerSupply: 6xAAbatteriesorACAdapter(optional)
Data Output: Yes (RS-232)
Product Certications: CE
Operating Temperature: 0 to 122°F (0 to 50°C)
Storage Temperature: 14 to 140°F (-10 to 60°C)
OperatingHumidityRange: 10to85%
Dimensions: Instrument:9.7x2.7x1.8"
(203x76x38mm)
Probe:1.5x0.6"(37x16mm)
Weight Instrument: 17.3oz (515g)
Probe: 3.5oz (99g)
REED Instruments
7
Instrument Description
POWER
ESC
FUNC.
HOLD
NEXT
REC
ENTER
UNIT
SET
TIME
CHECK SAMPLING
CHECK
LOG
Vibration Meter
SD Series Data Logger
R7000SD
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1.
POWER/Backlight/ESCButton
2. SET/Down/TimeButton
3. SD Card Slot
4. LCD Display
5. HOLD/FUNCTION/
NEXT Button
6. REC/ENTER/UNITButton
7. LOG/Up/SAMPLING
CHECK Button
8. RS-232 Output Jack
9. Reset Pin
10. Power Adapter Input
11. Tripod Mounting Screw
12. Battery Cover
13.Kickstand
14. BNC Input Socket
15. Cable BNC Plug
16. Sensor Cable
17. Mini Plug
18. Vibration Sensor Input Socket
19. Vibration Sensor
20. Magnetic Base
REED Instruments
8
Display Description
6
VEL mm/s cm/s
inch/s
RMS
PeakMax Min
10
11
12
ACC
m/s²
g ft/s²
3
1. RMS Mode Indicator
2. Measurement Reading
Indicator
3.
Date & Time Values
4. Date/TimeStamp
5. VelocityUnitofMeasure
6. AccelerationUnitofMeasure
7. MaximumPeakHoldIndicator
8. Peak Mode Indicator
9. MaximumandMinimum
Indicators
10. Record Mode Indicator
11.DataHoldIndicator
12. Low Battery Indicator
REED Instruments
9
Operating Instructions
Power ON/OFF
Turn the meter on by pressing the POWER button. To turn the meter off,
press and hold the POWER button for 2 seconds.
Note: Thismetercanbepoweredbyeithersix(6)"AA"batteriesorAC
adapter (sold separately).
Vibration Sensor
1. Plug in the BNC cable into the BNC input socket.
2. If the material under test is non-ferrous, place the vibration sensor on
the surface to take a measurement.
3. If the material under test is ferrous, connect the magnetic base to the
vibration sensor. Place the vibration sensor and magnetic base on
the surface to take a measurement. Do not touch the sensor cable
when taking measurements.
Selecting Measurement Modes
The R7000SD has 3 measurement modes:
• RootMeanSquare:MeasuresAccelerationandVelocity
• PEAK:MeasuresthePeakvalueofvibration
• MAXHOLD:MeasuresandupdatesthemaximumPeakValue
1.
When the meter is on, press and hold the FUNCTION button to
togglebetween"RMS","Peak"&"MaxHOLD".
2. Release the FUNCTION button to conrm selection.
continued...
REED Instruments
10
Changing Units of Measure
1. PressandholdtheUNITbutton,whileinRMSmeasurementmode.
2. The LCD display will toggle between the following units:
ACC m/s2
ACC g
VEL mm/s
VEL cm/s
ACC ft/s2
VEL inch/s
3. Release the UNIT button to select the displayed unit.
4. The selected unit will be saved as the new default.
Zero Adjustment
The zero adjustment is intended to remove small offsets caused by
environmental changes.
1. Ensure the vibration sensor is properly secured to the meter.
2. Setthemeasurementfunctionto"Acceleration"(m/s²,g,ft/s²).
3. Keepthevibrationsensormotionlesssonosignalispickedup.
4. Press and hold the LOGbuttonforapprox.5secondsoruntilazero
value is displayed.
Note: The zero adjustment function only works when the measured value
is less than 10 digits.
Max Hold Reset
WhileintheMaxHoldfunction,pressandholdtheLOG button for
3secondstoclearthecurrentmaxholdvalue.
continued...
REED Instruments
Table of contents
Other Reed Instruments Measuring Instrument manuals
Reed Instruments
Reed Instruments R3525 User manual
Reed Instruments
Reed Instruments R7920 User manual
Reed Instruments
Reed Instruments R8008 User manual
Reed Instruments
Reed Instruments R8050 User manual
Reed Instruments
Reed Instruments R1620 User manual
Reed Instruments
Reed Instruments R7150 User manual
Reed Instruments
Reed Instruments R5065 User manual
Reed Instruments
Reed Instruments Smart Series User manual
Reed Instruments
Reed Instruments R8180 User manual
Reed Instruments
Reed Instruments R9230 User manual
Reed Instruments
Reed Instruments R6210 User manual
Reed Instruments
Reed Instruments SMART Series User manual
Reed Instruments
Reed Instruments R1600 User manual
Reed Instruments
Reed Instruments LM-81AM User manual
Reed Instruments
Reed Instruments HT-6510A User manual
Reed Instruments
Reed Instruments Smart Series User manual
Reed Instruments
Reed Instruments R7050 User manual
Reed Instruments
Reed Instruments LM-81HT User manual
Reed Instruments
Reed Instruments R5090 User manual
Reed Instruments
Reed Instruments R9905 User manual
