R&S FSVA3000 Series User manual
R&S®FSVA3000/
R&S®FSV3000
Signal and Spectrum
Analyzer
Getting Started
1330807302
Version 04
(=NÞ×2)
Sie haben Fragen oder wünschen eine Beratung? Angebotsanfrage unter 07121 / 51 50 50 oder über [email protected]
Distributed by:
This manual applies to the following R&S®FSV3000 and R&S®FSVA3000 models
with firmware version 1.30 and higher:
●R&S®FSV3004 (1330.5000K04) / R&S®FSVA3004 (1330.5000K05)
●R&S®FSV3007 (1330.5000K07) / R&S®FSVA3007 (1330.5000K08)
●R&S®FSV3013 (1330.5000K13) / R&S®FSVA3013 (1330.5000K14)
●R&S®FSV3030 (1330.5000K30) / R&S®FSVA3030 (1330.5000K31)
●R&S®FSV3044 (1330.5000K43) / R&S®FSVA3044 (1330.5000K44)
In addition to the base unit, the following options are described:
●R&S®FSV3-B3, Audio Demodulator (1330.3765.02)
●R&S®FSV3-B4, OCXO frequency reference (1330.3794.02)
●R&S®FSV3-B5, Additional Interfaces (1330.3820.02)
●R&S®FSV3-B6, 10Gbit/s LAN interface (1330.3913.02)
●R&S®FSV3-B10, External generator control (1330.3859.02)
●R&S®FSV3-B11, YIG preselector bypass (1330.3865.02)
●R&S®FSV3-B20, Removable hard drive (1330.3971.02)
●R&S®FSV3-B24, Preamplifier (1330.4049.XX)
●R&S®FSV3-B25, Electronic attenuator (1330.4078.02)
●R&S®FSV3-B40, 40 MHz analysis bandwidth extension (1330.4103.02)
●R&S®FSV3-B114, enhanced computing power (1330.4910.02)
●R&S®FSV3-B200, 200 MHz analysis bandwidth extension (1330.4132.02)
●R&S®FSV3-B400, 400 MHz analysis bandwidth extension (1330.7154.02) /
R&S®FSV3-U400 (1330.7183.02)
●R&S®FSV3-B1000, 1 GHz analysis bandwidth extenstion (1346.3699.02)
●R&S®FSV3-K3, Power Sensor support (1346.3676.02)
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1330.8073.02 | Version 04 | R&S®FSVA3000/R&S®FSV3000
The following abbreviations are used throughout this manual: R&S®FSVA3000 is abbreviated as
R&S FSVA3000. R&S®FSV3000 is abbreviated as R&S FSV3000. R&S®FSV/A refers to both the
R&S FSV3000 and the R&S FSVA3000.
Contents
R&S®FSVA3000/R&S®FSV3000
3Getting Started 1330.8073.02 ─ 04
Contents
1 Safety and Regulatory Information...................................... 7
1.1 Safety Instructions................................................................................7
1.2 Warning Messages in the Documentation........................................10
1.3 Korea Certification Class A................................................................11
2 Documentation Overview....................................................12
2.1 Getting Started Manual.......................................................................12
2.2 User Manuals and Help...................................................................... 12
2.3 Service Manual....................................................................................13
2.4 Instrument Security Procedures....................................................... 13
2.5 Printed Safety Instructions................................................................ 13
2.6 Data Sheets and Brochures............................................................... 13
2.7 Release Notes and Open-Source Acknowledgment (OSA)............ 14
2.8 Application Notes, Application Cards, White Papers, etc...............14
3 Key Features........................................................................ 15
4 Preparing for Use.................................................................16
4.1 Lifting and Carrying............................................................................16
4.2 Unpacking and Checking................................................................... 16
4.3 Choosing the Operating Site............................................................. 17
4.4 Setting Up the R&S FSV/A................................................................. 17
4.5 Connecting the AC Power..................................................................19
4.6 Switching the Instrument On and Off............................................... 20
4.7 Connecting to LAN............................................................................. 21
4.8 Connecting a Keyboard......................................................................22
4.9 Connecting an External Monitor........................................................23
Contents
R&S®FSVA3000/R&S®FSV3000
4Getting Started 1330.8073.02 ─ 04
4.10 Windows Operating System...............................................................25
4.11 Logging On..........................................................................................27
4.12 Checking the Supplied Options.........................................................30
4.13 Performing a Self-Alignment............................................................. 30
4.14 Considerations for Test Setup...........................................................31
4.15 Protecting Data Using the Secure User Mode..................................32
5 Instrument Tour................................................................... 35
5.1 Front Panel View................................................................................. 35
5.2 Rear Panel View.................................................................................. 45
6 Trying Out the Instrument...................................................52
6.1 Measuring a Basic Signal...................................................................52
6.2 Displaying a Spectrogram..................................................................55
6.3 Activating Additional Measurement Channels.................................57
6.4 Performing Sequential Measurements............................................. 62
6.5 Setting and Moving a Marker............................................................. 63
6.6 Displaying a Marker Peak List........................................................... 65
6.7 Zooming into the Display................................................................... 67
6.8 Zooming into the Display Permanently............................................ 70
6.9 Saving Settings................................................................................... 74
6.10 Printing and Saving Results.............................................................. 76
7 Operating the Instrument....................................................78
7.1 Understanding the Display Information............................................78
7.2 Accessing the Functionality.............................................................. 88
7.3 Entering Data.......................................................................................94
7.4 Touchscreen Gestures....................................................................... 98
7.5 Displaying Results............................................................................102
Contents
R&S®FSVA3000/R&S®FSV3000
5Getting Started 1330.8073.02 ─ 04
7.6 Getting Help.......................................................................................110
8 Contacting Customer Support..........................................112
Index....................................................................................113
Contents
R&S®FSVA3000/R&S®FSV3000
6Getting Started 1330.8073.02 ─ 04
Safety and Regulatory Information
R&S®FSVA3000/R&S®FSV3000
7Getting Started 1330.8073.02 ─ 04
1 Safety and Regulatory Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the Chapter 1.1, "Safety Instructions",
on page 7.
Intended use
The product is intended for the development, production and verification of elec-
tronic components and devices in industrial, administrative, and laboratory envi-
ronments. Use the product only for its designated purpose. Observe the operating
conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 1.1, "Safety Instructions", on page 7. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
Safety Instructions
Safety and Regulatory Information
R&S®FSVA3000/R&S®FSV3000
8Getting Started 1330.8073.02 ─ 04
If any part of the product is damaged or broken, stop using the product. Never
open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. Contact Rohde & Schwarz
customer service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to elec-
tric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides a carrying bag designed for your product, you can
use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the prod-
uct is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Safety Instructions
Safety and Regulatory Information
R&S®FSVA3000/R&S®FSV3000
9Getting Started 1330.8073.02 ─ 04
Connecting to power
The product is an overvoltage category II product and has to be connected to a
fixed installation used to supply energy-consuming equipment such as household
appliances and similar loads. Be aware that electrically powered products have
risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●Before switching on the product, ensure that the voltage and frequency indica-
ted on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
●If a product has an exchangeable fuse, its type and characteristics are indica-
ted next to the fuse holder. Before changing the fuse, switch off the instrument
and disconnect it from the power source. How to change the fuse is described
in the product documentation.
●Only use the power cable delivered with the product. It complies with country-
specific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●Only use intact cables and route them carefully so that they cannot be dam-
aged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documenta-
tion or a power supply that conforms to the country-specific regulations.
●Only connect the product to a power source with a fuse protection of maxi-
mum 20 A.
●Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Safety Instructions
Safety and Regulatory Information
R&S®FSVA3000/R&S®FSV3000
10Getting Started 1330.8073.02 ─ 04
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
protects you against electric shock should an electric problem occur.
Connecting headphones
Take the following measures to prevent hearing damage. Before using head-
phones, check the volume and reduce it if necessary. If you monitor varying sig-
nal levels, take off the headphones and wait until the signal has settled. Then
adjust the volume.
1.2 Warning Messages in the Documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
WARNING
Potentially hazardous situation
Could result in death or serious injury if not avoided.
CAUTION
Potentially hazardous situation
Could result in minor or moderate injury if not avoided.
NOTICE
Potential risks of damage
Could result in damage to the supported product or to other property.
Warning Messages in the Documentation
Other manuals for FSVA3000 Series
2
This manual suits for next models
1
Table of contents
Other R&S Measuring Instrument manuals
