Content
1. Short description 1
2. Assembly 2
3. Elektrical connection and connection examples 3
3.1. Pin assignment 3
3.2. Connection examples 3
3.2.1. Voltage / Current 3
3.2.2. Pt100 / Pt1000 / thermocouple 6
3.2.3. Frequency / Rotational speed 7
3.2.4. Counter 10
3.3. Switching points 11
connection examples
4. Functional description and operation 13
4.1. Operation and display elements 13
4.2. Programming software PM-TOOL 14
5. Setting the display 14
5.1.Switch on
6. Parameterization 15
6.1. Selection of the input signal, Type 15
6.1.1. Voltage / Current, Volt, AMPE 16
Setting the end and start value, End, Enda, offs, offa 17
Setting the decimal point, Dot.A 17
Zero point calming of the input signal,zero 17
Tare value, tara 17
Over/underflow behavior,over 17
Input of support points for linearization of the measurement signal,spc.A 18
6.1.2. Pt100, Pt1000, thermocouple, pt.se, ther 19
Temperature display in °C/°F,unit 19
Line adaptation,offs 19
6.1.3. Impulse measurement, impu 20
6.1.3.1. Frequency, freq 20
Impuls actuation,i.typ 21
Frequency range,rang 21
Filter,filt 22
Setting the end and start value,end,endf,offs,offf 22
Setting the decimal point, dot.F 22
Tare value,tara 22
Input of support points for linearization of the measurement signal, spc.F 22
6.1.3.2. Rotational speed, turn 23
Impuls actuation, i.typ 23
Filter,filt 24
Impuls per revolution,ppt 24
Time base,time 24
Setting the decimal point,dot 24
